Alabaster Vertical Wall Sconce

Details

Stone, Light, and Frame

Close views of the alabaster surface and the glowing disc where it meets the dark metal

01Pale alabaster fills the frame, layered with cream, ivory, and a warm beige streak. Fine crystalline lines and soft fissures cross the stone

02A curved alabaster disc glows against a flat black metal plate, with warm light gathered along the seam. A dark circular form sits partly behind the plate, and a slim stem runs above and below

03The illuminated disc curves beside a shorter black vertical plate, its edge lit from within with a soft amber glow. The dark metal continues as a narrow stem above and below the stone

Vertical Wall Sconce

Warm stone light
across the wall

A sleek vertical metal frame holds genuine alabaster discs, each translucent enough to show its own veining when lit from within. Tall proportions draw the eye upward as the stone casts a warm, even glow across the wall. Veining and tone differ from disc to disc, while the glow stays consistent

Highlights

Stone, scale, and light

Natural alabaster discs on a metal frame turn integrated LED light into a warm vertical glow

Natural alabaster

Genuine stone diffuses the LED through its veining for a warm, organic glow. Tone and translucency vary from disc to disc; those differences belong to the stone

Two model ranges

Model A is 7.9″ (20 cm) across in three heights. Model B pairs 5.9″ (15 cm) or 7.9″ (20 cm) widths with taller options. Both use a 4.7″ (12 cm) disc and sit 2.4″ (6 cm) from the wall

Warm integrated LED

The light source is a non-replaceable LED. Standard warm light works with a common wall switch, or choose Triac dimmable warm light, which ships with an external driver

Gold or black

Model A comes in gold or black metal. Model B is black only. The discs are white natural alabaster

Specifications

Size and light

Diameter	×: ∅ 100cm (7.9 ″)
Height	×: 39.4 ″
Diameter	×: ∅ 120cm (7.9 ″)
Height	×: 47.2 ″
Diameter	×: ∅ 160cm (7.9 ″)
Height	×: 63 ″
Diameter	×: ∅ 120cm (5.9 ″). ×: ∅ 150cm (5.9 ″)
Height	×: 59.1 ″
Diameter	×: ∅ 180cm (7.9 ″)
Height	×: 70.9 ″. ∅ 7.9″ (39.4 ″). ∅ 5.9″ (47.2 ″)
Model A diameter	7.9″ (20 cm)
Model A height	39.4″ (100 cm), 47.2″ (120 cm), 63″ (160 cm)
Model B diameter	5.9″ (15 cm) at 47.2″ (120 cm) and 59.1″ (150 cm). 7.9″ (20 cm) at 70.9″ (180 cm)
Model B height	47.2″ (120 cm), 59.1″ (150 cm), 70.9″ (180 cm)
Alabaster disc	4.7″ (12 cm)
Light source	Integrated LED (non-replaceable)
Power	Model A ~10W. Model B ~8W
Light	Warm light, or Triac dimmable warm light; other color temperatures by custom order
Voltage	AC 110–240V
Wiring	Hardwired
Control	Common wall switch (not included). Dimmable version needs a TRIAC dimmer; rotary dimmers are not compatible
Environment	Indoor, dry locations only
Materials	Metal, natural alabaster
Finish	Gold (Model A). Black (Model A and Model B). White natural alabaster

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Explore the Series

Eloise Series

Colorful glass lights with a soft, lived-in glow.

Travira Series

Natural travertine lights, soft ambient glow.

Brass & Glass Series

Warm brass meets elegant glass for timeless sophistication.

New in

The latest fixtures, just added.

Black Friday Sale

Up to 20% off.

November 12–30 · one code per order

10% Buy 1
13% Buy 2
15% Buy 3
Best offer 20% $1,000+

Before you order

Which code should I use?

Buy 1 for 10% off with M10. Buy 2 for 13% off with M13. Buy 3 for 15% off with MBF15. Orders of $1,000 or more take 20% off with MBF20. Enter the code that matches your cart.

Where do I enter it?

Add it in the discount field at checkout. You can also copy M10 from the top banner.

Is shipping free?

Yes. Standard shipping is free, except Alaska, Hawaii and Puerto Rico. Shipping policy

How long does delivery take?

Standard orders usually take 1–2 weeks to process and 1–3 weeks to ship. Expedited shipping, where available, usually takes 1–3 days to process and 2–6 days to the United States.

Can I return or cancel?

You have 14 days from delivery to return an unused item in original condition. Return shipping is generally your responsibility. Cancel free of charge within 24 hours if it has not shipped. Email support@monulo.com. Return policy

Monulo

Alabaster Vertical Wall Sconce

Stone, Light, and Frame

Warm stone light
across the wall