Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
-
Description
-
Review
-
Lighting Size Guide
Description
Details
Cord, rim, and beads
Three close views show the natural-fiber shade, its wrapped edge, and the wooden bead garland hanging below
Pendant Light
Woven Jute Dome
with Bead Swags
Natural-tan jute rope is woven into a dome, with cream wood beads swagged as a garland around the lower rim. Light filters through the gaps in the weave and throws a layered shadow on the surface below. A twisted rope cord drops from a small solid-wood canopy, so the mount reads as warm wood at the ceiling
Highlights
Weave, Beads, and Scale
A hand-woven jute dome with draped wood beads, offered in three sizes and lit by a warm LED bulb
01
Hand-Woven Jute
Natural-tan jute rope is woven by hand over a metal frame, so light passes through the gaps in the dome
02
Cream Bead Swags
Real wood beads are strung into garlands that drape around the lower rim, in a cream tone that can vary slightly piece to piece
03
Three Widths
Choose 15.7″, 19.7″, or 23.6″ wide for a nook or hallway, a small table or island pair, or a six-seat table and covered porch
04
Warm LED Included
One replaceable 9W warm white 3000K LED fits the E26 base; halogen and incandescent run too hot near the jute
Specifications
Size and light
| Width | Small: 15.7″ (40 cm). Medium: 19.7″ (50 cm). Large: 23.6″ (60 cm) |
|---|---|
| Height | Small: 9.8″ (25 cm). Medium: 11.4″ (29 cm). Large: 13″ (33 cm) |
| Cord length | Adjustable up to 59″ (150 cm), shortenable at install |
| Canopy | 4.7″ (12 cm) solid wood, warm-tone finish |
| Fixture | Hardwired single-bulb pendant |
| Base | E26 medium screw base |
| Bulb | 9W warm white 3000K LED, included and replaceable |
| Lamp type | LED only |
| Shade | Hand-woven natural jute rope over a metal frame |
| Garland | Real wood beads |
| Cord | Twisted natural-rope cord |
| Finish | Natural jute tan with cream-toned beads; tone, weave, and bead color vary slightly piece to piece |
BeigeDia 40cm x H 25cm / ∅ 15.7″ x H 9.8″
BeigeDia 50cm x H 29cm / ∅ 19.7″ x H 11.4″
BeigeDia 60cm x H 33cm / ∅ 23.6″ x H 12.9″
Review
Lighting Size Guide
Monulo · The practical guide
Lighting that fits.
A room that feels right.
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 · Get the scale right
A useful starting point, in seconds.
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 · Look up
Work with your ceiling.
The available drop matters as much as the fixture diameter.
Around 9–10 ft / 2.74–3.05 m
Balance the drop
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Scale with intention
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Dining table
Let the furniture define the focal point.
- Measure
- Measure the tabletop, including its width at the widest point.
- Size & place
- For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
- Check
- Center on the table and check the view across it while seated.
Room study 02
Kitchen island
Plan the whole row before choosing the quantity.
- Measure
- Record counter length, width and the working area below.
- Size & place
- Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
- Check
- Mark equal centers; verify the actual gap between shades rather than using center spacing alone.
Room study 03
Room center
Use the room formula as a visual starting point.
- Measure
- Record length, width and finished ceiling height.
- Size & place
- Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
- Check
- Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.
Room study 04
Hallway & entry
A consistent rhythm works better than a crowded ceiling.
- Measure
- Mark the full walking route, doors and changes in ceiling height.
- Size & place
- Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
- Check
- Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.
Room study 05
Bathroom vanity
Put comfortable facial lighting first.
- Measure
- Record mirror dimensions, side wall space and cabinet swing.
- Size & place
- For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
- Check
- Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.
Room study 06
Bedroom & bedside
Choose the height from where you actually sit.
- Measure
- Measure the mattress, nightstand and your seated position.
- Size & place
- Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
- Check
- Check reach to the switch, head movement, pillows and any adjustable arm.
Room study 07
Reading & living
Light the page without exposing the source.
- Measure
- Sit in your usual chair with a book before locating the lamp.
- Size & place
- Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
- Check
- Keep the base and cord out of traffic; check glare from both the chair and nearby seats.
03 · Before the tools come out
One installation checklist.
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Mock up the final position
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Verify the mounting
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Match the electrical details
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 · The last few details
Questions before you choose.
Which measurement should I use for the drop?
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
Does a larger light always mean a brighter room?
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.
How do I choose between two or three island pendants?
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
What if my ceiling is too low for the light I like?
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
Can any fixture go in a bathroom or on a sloped ceiling?
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
What should I send when asking for sizing advice?
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.
Eloise Series
Colorful glass lights with a soft, lived-in glow.
Travira Series
Natural travertine lights, soft ambient glow.
Brass & Glass Series
Warm brass meets elegant glass for timeless sophistication.
New in
The latest fixtures, just added.
Black Friday Sale
Up to 20% off.
November 12–30 · one code per order
Copy the code that matches your cart, then paste it at checkout.
- 10% Buy 1
- 13% Buy 2
- 15% Buy 3
- Best offer 20% $1,000+
Before you order
Which code should I use?
Buy 1 for 10% off with M10. Buy 2 for 13% off with M13. Buy 3 for 15% off with MBF15. Orders of $1,000 or more take 20% off with MBF20. Enter the code that matches your cart.
Where do I enter it?
Add it in the discount field at checkout. You can also copy M10 from the top banner.
Is shipping free?
Yes. Standard shipping is free, except Alaska, Hawaii and Puerto Rico. Shipping policy
How long does delivery take?
Standard orders usually take 1–2 weeks to process and 1–3 weeks to ship. Expedited shipping, where available, usually takes 1–3 days to process and 2–6 days to the United States.
Can I return or cancel?
You have 14 days from delivery to return an unused item in original condition. Return shipping is generally your responsibility. Cancel free of charge within 24 hours if it has not shipped. Email support@monulo.com. Return policy
At Monulo,
Light Feels at Home.
Light Feels at Home.
Monulo lighting is made to feel at home in the room. Glass, fabric, stone, metal and rattan each shape a different glow, from a clear bright line to a soft warm light. The idea is simple: a fixture should add warmth and character without taking over the space.