Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Details
Three close views show the veined surface, the finished edge of the dome, and the meeting of stone and metal
Dome pendant light
A dome shade of semi-translucent alabaster shows natural veining and glows warm when lit. Light passes through the stone and spreads softly in any direction. Hang one over a table or nightstand, or group up to 15 heads at staggered lengths for a stairwell or double-height room
Highlights
A semi-translucent alabaster shade that hangs alone or in a staggered cluster
White alabaster is semi-translucent, so light passes through and the natural veining shows, with a soft warm glow in any direction
Use one pendant over a bedside or dining chair, or a cluster of 3 to 15 heads hanging at staggered lengths from one canopy
A replaceable E26 bulb provides warm light at 3000K
The shade finish is white alabaster. The body is offered in brass or white
Specifications
| Diameter | Single: 7.9ā³ (20 cm). 3-light: 11.8ā³ (30 cm). 5-light: 15.7ā³ (40 cm). 7-light: 17.7ā³ (45 cm). 9-light: 19.7ā³ (50 cm). 15-light: 25.6ā³ (65 cm) |
|---|---|
| Height | Single: 5.7ā³ (14 cm) |
| Drop | 3-light: 59ā³ (150 cm). 5-light: 78.7ā³ (200 cm). 7-light: 98.4ā³ (250 cm). 9-light: 118ā³ (300 cm). 15-light: 157ā³ (399 cm) |
| Canopy | Single mounting plate: 3.9ā³ (10 cm). Cluster: 11.8ā³ (30 cm) or smaller |
| Light source | E26 bulb, replaceable |
| Color temperature | Warm light (3000K) |
| Voltage | AC 110ā240V |
| Wiring | Hardwired |
| Environment | Indoor |
| Material | Natural Spanish alabaster, brass, marble |
| Shade finish | White alabaster |
| Body finish | Brass or white |
| Cord | Thin black |






Whiteā 7.9ā³ x H 5.7ā³ / Dia 20cm x H 14.5cm
White3 Heads ā 11.8ā³ Ć H 59ā³
White5 Heads ā 15.7ā³ Ć H 78.7ā³
White7 Heads ā 17.7ā³ Ć H 98.4ā³
White9 Heads ā 19.7ā³ Ć H 118ā³
White11 Heads ā 21.6ā³ Ć H 138ā³
White15 Heads ā 25.6ā³ Ć H 157ā³
Monulo Ā· The practical guide
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 Ā· Get the scale right
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 Ā· Look up
The available drop matters as much as the fixture diameter.
Around 8 ft / 2.44 m
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Around 9ā10 ft / 2.74ā3.05 m
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Let the furniture define the focal point.
Room study 02
Plan the whole row before choosing the quantity.
Room study 03
Use the room formula as a visual starting point.
Room study 04
A consistent rhythm works better than a crowded ceiling.
Room study 05
Put comfortable facial lighting first.
Room study 06
Choose the height from where you actually sit.
Room study 07
Light the page without exposing the source.
03 Ā· Before the tools come out
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 Ā· The last few details
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the roomās other light sources separately.
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.
Black Friday Sale
November 12ā30 Ā· one code per order
Copy the code that matches your cart, then paste it at checkout.
Before you order