Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Details
Three close views of the glass, the metal arms, and the joint above the bubbles
Bubble chandelier
Seven clear glass bubbles cluster around a tapered black metal stem and hang on a brass or black cord. Each bubble glows on its own, so the fixture reads as a small cloud when lit. It hangs low enough to work over a dining table or entryway console, throwing warm pools of light down without blocking sight lines
Highlights
Clear glass on metal, with the sizes, bulbs, and finishes listed for this chandelier
A metal frame holds clear glass bubbles and hangs from a natural cotton cord
Round diameters are 19.7″, 25.6″, and 27.6″, with a 47.2″ length layout as well. An approximate size of 14–16″ wide by 18–20″ tall is also listed, and the cord is 59″ and adjustable
Takes an LED bulb or an Edison bulb on an E26 or E27 base, up to 60W, on AC 110–240V
Metal finishes are copper plating or chrome. Cord colors are black, white, or brown
Specifications
| Height | 3heads Round size: Dia 50cm: ∅ 19.7″ (60 cm). 4heads Round size: Dia 65cm: ∅ 25.6″ (75 cm). 6heads Round size: Dia 70cm: ∅ 27.6″ (75 cm) |
|---|---|
| Length | 6heads Round size: 47.2″ (120 cm) |
| Height | 6heads Round size: 19.7″ (50 cm) |
| Approximate width | 14–16″ (35–40 cm) |
| Approximate height | 18–20″ (45–50 cm) |
| Glass count | 3-head round: 9. 4-head round: 12. 6-head round: 20. 6-head (L): 40 |
| Cord length | 59″ (150 cm), adjustable |
| Light source | LED bulb or Edison bulb |
| Bulb base | E26 or E27 |
| Max power | 60W |
| Voltage | AC 110–240V |
| Material | Metal, glass, natural cotton cord |
| Glass | Clear |
| Finish | Copper plating, chrome |
| Cord color | Black, white, brown |



Copper plating+Black · Clear3heads Round
Copper plating+Black · Clear4heads Round
Copper plating+Black · Clear6heads Round
Copper plating+Black · Clear6heads Horizontal
Monulo · The practical guide
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 · Get the scale right
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 · Look up
The available drop matters as much as the fixture diameter.
Around 8 ft / 2.44 m
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Around 9–10 ft / 2.74–3.05 m
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Let the furniture define the focal point.
Room study 02
Plan the whole row before choosing the quantity.
Room study 03
Use the room formula as a visual starting point.
Room study 04
A consistent rhythm works better than a crowded ceiling.
Room study 05
Put comfortable facial lighting first.
Room study 06
Choose the height from where you actually sit.
Room study 07
Light the page without exposing the source.
03 · Before the tools come out
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 · The last few details
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.
Black Friday Sale
November 12–30 · one code per order
Copy the code that matches your cart, then paste it at checkout.
Before you order