Pendant Light Design | Linked Cylinder Glow | Home Dining Spaces

Details

Ribbed glass and a warm metal join

Close views show clear vertical fluting meeting a brushed champagne-gold connector

01Clear glass curves into deep vertical ribs, with bright edges and soft reflections running along the rounded form

02A brushed champagne-gold cylinder links the ribbed glass below to a narrower fluted glass section above

03The warm metal band sits between a glowing, vertically fluted glass form and a clear fluted glass cylinder beneath it

Glass pendant light

Warm light
at the glass joints

Hand-blown crystal glass cylinders link end to end, joined by polished champagne-gold connectors in metal and aluminum. Integrated LEDs are concealed in each connection, so warm light appears only at the joints and travels softly through the clear-cut glass, with no exposed bulb and no glare. The modular system spans a compact single drop, wide cascades, horizontal lines, and vertical stacks

Highlights

Glass, joints, and sizes

Clear hand-blown cylinders, hidden warm LEDs, and a range of standard layouts define this pendant

Hand-blown crystal glass

Cylinders are cut with clean, clear lines and made by hand, so small bubbles and slight shade differences are part of the glass

Hidden warm LEDs

Integrated LEDs sit inside the champagne-gold joints, and warm 3000K light glows at the connections rather than from an exposed bulb

Modular size choices

Twelve standard configurations run from a compact single drop to cascades and linear versions, with fully custom layouts also available

Champagne-gold finish

Polished champagne-gold connectors contrast with the clear crystal glass

Specifications

Size and light

Diameter	∅ 200cm (19.7 ″)
Height	78.7 ″
Diameter	∅ 100cm (8.3 ″)
Height	39.4 ″
Diameter	Round: 4.7 ″. ∅ 150cm (23.6 ″)
Height	59 ″
Diameter	∅ 100cm (23.6 ″)
Length	82cm (32.2 ″)
Height	10cm (3.9 ″)
Length	108cm (42.5 ″)
Height	21cm (8.3 ″)
Length	Long: 65cm (25.6 ″)
Width	Long: 12cm (4.7 ″)
Length	88cm (34.6 ″)
Height	20cm (7.9 ″)
Length	106cm (41.7 ″)
Diameter	∅ 43.5cm (2 ″)
Height	17.1 ″
Diameter	∅ 69cm (8.3 ″)
Height	27.2 ″
Hanging cable	59.1″ (150 cm), adjustable and can be lengthened on request
Light source	Integrated LED, concealed in the joints; replaceable module
Power	Combination 1: 90W. Models E / F: 12W. Model G: 33W. Model H: 42W. Model I: 12W. Version A and Models J / K / L: 18W. Model M: 3W. Model N: 6W
Color temperature	3000K warm light
Control	Default non-dimmable with a common on/off wall switch. Dimmable version uses Triac warm dimming and needs a Triac dimmer
Voltage	AC 110–240V
Mounting	Ceiling, hardwired

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Explore the Series

Eloise Series

Colorful glass lights with a soft, lived-in glow.

Travira Series

Natural travertine lights, soft ambient glow.

Brass & Glass Series

Warm brass meets elegant glass for timeless sophistication.

New in

The latest fixtures, just added.

Black Friday Sale

Up to 20% off.

November 12–30 · one code per order

10% Buy 1
13% Buy 2
15% Buy 3
Best offer 20% $1,000+

Before you order

Which code should I use?

Buy 1 for 10% off with M10. Buy 2 for 13% off with M13. Buy 3 for 15% off with MBF15. Orders of $1,000 or more take 20% off with MBF20. Enter the code that matches your cart.

Where do I enter it?

Add it in the discount field at checkout. You can also copy M10 from the top banner.

Is shipping free?

Yes. Standard shipping is free, except Alaska, Hawaii and Puerto Rico. Shipping policy

How long does delivery take?

Standard orders usually take 1–2 weeks to process and 1–3 weeks to ship. Expedited shipping, where available, usually takes 1–3 days to process and 2–6 days to the United States.

Can I return or cancel?

You have 14 days from delivery to return an unused item in original condition. Return shipping is generally your responsibility. Cancel free of charge within 24 hours if it has not shipped. Email support@monulo.com. Return policy

Monulo

Linked Hand-Blown Cylinder Glass Pendant Light – Modern Glass and Metal – Dining and Living Rooms

Ribbed glass and a warm metal join

Warm light
at the glass joints