Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Details
Close views show the woven shade, red seam piping, and the cords that hold the rim
Pendant lamp
White satin is stretched over an iron frame into a lantern wide at the middle, with the brim turned up and dark red piping tracing every rib from crown to rim. Black cords fan from a knot above the crown and tie to the rim, so the shade hangs from that rigging rather than a center rod. Lit, the satin glows a warm ivory in every direction, and the open bottom drops extra light downward
Highlights
A fabric lantern pendant with red-piped seams, black cord rigging, and an even warm glow
White satin is stretched over an iron frame, every rib bound in dark red piping, and the brim turns up at the rim
Black cords fan from a knot above the crown to the rim, and the shade hangs from the rigging instead of a center rod
Three E26 or E27 bulbs are included so the satin lights evenly with warm light, without a hot spot
Shade diameters run from 15.7″ (40 cm) to 31.5″ (80 cm), with a 4.7″ (12 cm) canopy and a 59″ (150 cm) cord shortened at install
Specifications
| Height | Dia 40cm/15.7″ × /7.1″: 18 cm. Dia 50cm/19.7″ × /9.1″: 23 cm. Dia 60cm/23.6″ × /11″: 28 cm. Dia 80cm/31.5″ × /22″: 56 cm |
|---|---|
| Shade diameter | Small: 15.7″ (40 cm). Medium: 19.7″ (50 cm). Large: 23.6″ (60 cm). Extra Large: 31.5″ (80 cm) |
| Shade height | Small: 7.1″ (18 cm). Medium: 9.1″ (23 cm). Large: 11″ (28 cm). Extra Large: 22″ (56 cm) |
| Canopy diameter | 4.7″ (12 cm) |
| Cord | 59″ (150 cm), adjustable at install |
| Hang over a table | Bottom of the shade about 30–34″ (75–85 cm) above the top |
| Hang in an open room | 83″ (210 cm) or more off the floor |
| Light source | 3 × E26 or E27, bulbs included, warm light |
| Replacements | LED only, up to 9W each; frosted bulbs keep the glow even |
| Power | Hardwired; canopy mounts to a standard ceiling junction box |
| Spread | Translucent shade glows in every direction; open bottom adds light downward |
| Frame and canopy | Iron |
| Shade | Satin fabric with fabric piping |
| Cords | Black |
| Finish | White with red piping |

Red & WhiteDia 40cm x H 18cm / ∅ 15.7″ x H 7.1″
Monulo · The practical guide
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 · Get the scale right
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 · Look up
The available drop matters as much as the fixture diameter.
Around 8 ft / 2.44 m
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Around 9–10 ft / 2.74–3.05 m
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Let the furniture define the focal point.
Room study 02
Plan the whole row before choosing the quantity.
Room study 03
Use the room formula as a visual starting point.
Room study 04
A consistent rhythm works better than a crowded ceiling.
Room study 05
Put comfortable facial lighting first.
Room study 06
Choose the height from where you actually sit.
Room study 07
Light the page without exposing the source.
03 · Before the tools come out
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 · The last few details
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.
Black Friday Sale
November 12–30 · one code per order
Copy the code that matches your cart, then paste it at checkout.
Before you order