Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Details
Three frames follow the white lamp from the curved shade to the glowing cone and the cylinder beneath it
Mushroom table lamp
Three metal shapes stack into a mushroom silhouette: a cylinder, a cone, and a hemisphere, with body and shade finished as one. Light leaves from beneath the domed shade, falling across the table and glowing softly around the form. It reads as a quiet geometric object whether the finish is bright or matte
Highlights
A metal mushroom lamp in two sizes, five matched finishes, and a bulb base chosen for each size
Cylinder, cone, and hemisphere make one metal composition, with the body and shade matched in the same colorway
Small measures 9.8 inches across and 13.8 inches high; Big measures 13.8 inches across and 19.7 inches high
Bright Black, Bright White, Copper, Matte Black, and Matte White, each with body and shade in the same finish
Small uses a G9 base; Big uses an E12 or E14 base. Bulb not included. LED or Edison-style bulbs work, and a warm 2700–3000K LED is recommended
Specifications
| Diameter | Two sizes: Small ( ×: ∅ 13.8″ (9.8 ″) |
|---|---|
| Height | Two sizes: Small ( ×: 19.7″ (13.8 ″) |
| Light source | Small: G9 base. Big: E12 or E14 base. Bulb not included |
| Bulb | LED or Edison-style. Warm-toned LED (2700–3000K) recommended |
| Voltage | AC 110–240V |
| Power | Plug-in · 59.1″ (150 cm) cord · Inline push-button switch · No installation required |
| Use | IP20 · Indoor use only · Not waterproof |
| Material | Metal |
| Finishes | Bright Black, Bright White, Copper, Matte Black, Matte White. Body and shade match per colorway |









Bright White · US Plug∅ 9.8″ x H 13.8″ / Dia 25cm x H 35cm
Bright black · US Plug∅ 9.8″ x H 13.8″ / Dia 25cm x H 35cm
Copper · US Plug∅ 9.8″ x H 13.8″ / Dia 25cm x H 35cm
Matte black · US Plug∅ 9.8″ x H 13.8″ / Dia 25cm x H 35cm
Matte white · US Plug∅ 9.8″ x H 13.8″ / Dia 25cm x H 35cm
Bright White · US Plug∅ 13.8″ x H 19.7″ / Dia 35cm x H 50cm
Bright black · US Plug∅ 13.8″ x H 19.7″ / Dia 35cm x H 50cm
Copper · US Plug∅ 13.8″ x H 19.7″ / Dia 35cm x H 50cm
Matte black · US Plug∅ 13.8″ x H 19.7″ / Dia 35cm x H 50cm
Matte white · US Plug∅ 13.8″ x H 19.7″ / Dia 35cm x H 50cm
Monulo · The practical guide
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 · Get the scale right
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 · Look up
The available drop matters as much as the fixture diameter.
Around 8 ft / 2.44 m
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Around 9–10 ft / 2.74–3.05 m
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Let the furniture define the focal point.
Room study 02
Plan the whole row before choosing the quantity.
Room study 03
Use the room formula as a visual starting point.
Room study 04
A consistent rhythm works better than a crowded ceiling.
Room study 05
Put comfortable facial lighting first.
Room study 06
Choose the height from where you actually sit.
Room study 07
Light the page without exposing the source.
03 · Before the tools come out
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 · The last few details
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.
Black Friday Sale
November 12–30 · one code per order
Copy the code that matches your cart, then paste it at checkout.
Before you order