Metal plug-in pendant light glowing at night

Auto on / off

Painted metal + braided cord

Seven colour options
one warm glow.

Painted barn shade with a braided plug-in cord treated as visible decor. The visible form and mounting connection keep the design easy to understand before the light is switched on. The photographed options let the same form shift mood without changing its identity.

7 metal coloursPlug-in freedomE26 socketL 204.7″ cord

Colour

Useful details for everyday placement

Details that hold the design together

The photographed options let the same form shift mood without changing its identity.

Cord

Braided fabric cord

The woven cord adds visible texture against the painted metal shade, helping the pendant feel at home beside timber furniture, soft textiles, or painted cabinetry.

Finish

Warm brass-finish socket

A warm brass finish gives the socket a clear vintage accent and complements every shade colour.

Three sets of hanging hardware for adjustable pendant height

Hanging kit

Choose the hanging height

Three sets of hanging hardware allow the drop to be adjusted, making it easier to position the shade above a table or at bedside height.

Colour for lived-in rooms

Surface, frame and connection.

The painted metal shade keeps the plug-in format simple while changing the visual character of a room. Its barn-inspired profile suits the sunset tones of a living room, the blue details of a breakfast room, or the greenery of a bedroom.

Sunset living room

Sea Blue introduces a cool accent against warm sunset colours, neutral upholstery, and natural wood in the living room.

Coastal breakfast room

Dark Blue works with painted cabinetry and blue-and-white ceramics, giving a bright breakfast setting a stronger visual anchor.

Botanical bedroom

Green echoes leaf-pattern textiles and casts a focused pool of bedside light in a room filled with botanical detail.

Country kitchen

Red picks up patterned ceramics and painted cabinetry, adding a warm, collected note to the country kitchen.

Plug-in design

Hang it where the room needs light

Use a suitable ceiling hook, guide the long braided cord to a nearby outlet, and adjust the drop with the included hanging hardware. The plug-in design lets the pendant serve a dining table, bedside corner, or other location without rewiring the room.

No hardwiring — renter-friendly placement

L 204.7″ / L 520 cm adjustable cord

Inline on/off switch plus rotary socket switch

Seven painted metal finishes for different room moods

E26 base — choose LED, incandescent, or CFL

Adjusting the hanging height of a metal plug-in pendant light

Specifications

A simple format for considered placement

The set includes a single 10.6-inch shade, a long adjustable cord, and an E26 socket for flexible plug-in use.

Type

Plug-in pendant light

Shade size

∅ 10.6″ × H 7.7″ / Dia 26.9 cm × H 19.6 cm

Cord length

L 204.7″ / L 520 cm, adjustable

Color

Black · Dark Blue · Green · Red · Sea Blue · White · Yellow

Material

Metal shade, brass-tone socket, braided fabric cord

Bulb base

E26

Bulb included

Compatible bulbs

LED, incandescent, or CFL

Power source

Plug-in

Plug Type

US · UK · EU · AU

Switching

Inline on/off switch + rotary socket switch

Certification

Varies by plug configuration

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Farmhouse Plug-In Pendant with an on/off switch and shade colour choices

Seven colour options
one warm glow.