Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Details
Warm gold metal with a fine linear grain joins slim arms, a round collar, and a milky globe
Opal globe chandelier
Antique brass arms carry white opal glass spheres in an asymmetrical cluster. Each globe softens warm light and sends it outward and down. Hung low over a dining table or entryway, the arrangement reads as organic, sculptural light
Highlights
White opal glass and antique brass come in six light counts, with a drop set for the ceiling
White opal glass spheres, 5.9″ (15 cm) across, diffuse warm light from an E26 or E27 bulb
Antique brass arms and canopy, finished in brass and hardwired to the ceiling
From six to sixteen lights, with widths from 27.6″ to 37.8″
Suspension rods come in 3.9″, 7.9″, or 11.8″ lengths, with longer drops made to order
Specifications
| Diameter | 6heads: ∅ 52cm (27.6 ″) |
|---|---|
| Height | 6heads: 20.5 ″ |
| Diameter | 8heads: ∅ 52cm (31.5 ″) |
| Height | 8heads: 20.5 ″ |
| Diameter | 4+4heads: ∅ 56cm (31.5 ″) |
| Height | 4+4heads: 22 ″ |
| Diameter | 6+6heads: ∅ 56cm (35.4 ″) |
| Height | 6+6heads: 22 ″ |
| Diameter | 8+4heads: ∅ 56cm (37.8 ″) |
| Height | 8+4heads: 22 ″ |
| Diameter | 8+8heads: ∅ 60cm (37.8 ″) |
| Height | 8+8heads: 23.6 ″ |
| Length | 140cm packing size: 73 cm |
| Width | 140cm packing size: 39 cm |
| Height | 140cm packing size: 33 cm |
| Globe diameter | 5.9″ (15 cm) |
| Drop length | 3.9″, 7.9″, or 11.8″ |
| Light source | LED bulb or Edison bulb |
| Base | E26 or E27 |
| Voltage | AC 110–240V |
| Mounting | Ceiling |
| Wiring | Hardwired |
| Control | Common wall switch (not included) |
| Finish | Brass |
| Glass | White |





Brass6heads ∅ 27.6″ x H 20.5″ / Dia 70cm x H 52cm
Brass8heads ∅ 31.5″ x H 20.5″ / Dia 80cm x H 52cm
Brass4+4heads ∅ 31.5″ x H 22″ / Dia 80cm x H 56cm
Brass6+6heads ∅ 35.4″ x H 22″ / Dia 90cm x H 56cm
Brass8+4heads ∅ 37.8″ x H 22″ / Dia 96cm x H 56cm
Brass8+8heads ∅ 37.8″ x H 23.6″ / Dia 96cm x H 60cm
Monulo · The practical guide
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 · Get the scale right
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 · Look up
The available drop matters as much as the fixture diameter.
Around 8 ft / 2.44 m
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Around 9–10 ft / 2.74–3.05 m
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Let the furniture define the focal point.
Room study 02
Plan the whole row before choosing the quantity.
Room study 03
Use the room formula as a visual starting point.
Room study 04
A consistent rhythm works better than a crowded ceiling.
Room study 05
Put comfortable facial lighting first.
Room study 06
Choose the height from where you actually sit.
Room study 07
Light the page without exposing the source.
03 · Before the tools come out
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 · The last few details
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.
Black Friday Sale
November 12–30 · one code per order
Copy the code that matches your cart, then paste it at checkout.
Before you order