Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Details
Raised bubbles and soft folds run through the golden shade from its wavy edge to the canopy
Ceiling chandelier
Slim wires hold feathery, handcrafted shades in a lively, gravity-defying form. Light from each curlicue stem beams upward into its shade. The round, curved shades diffuse that light into a soft, atmospheric glow
Highlights
Head count, metal finish, and upward bulb light are the choices that shape this chandelier
The materials are metal, brass, and stainless steel, worked by cutting, polishing, and electroplating
The finish is gold, and the lampshade color is brass
Head counts are 1, 3, 6, 10, 12, and 15, each with its own diameter and height
Each head uses a pluggable G4 LED or halogen bulb of about 3W. Light beams upward and the shades spread a soft glow. The default bulb is not dimmable
Specifications
| Height | 1 head Size: Dia 30cm: ∅ 11.8″ (7 cm). Size: Dia 40cm: ∅ 15.7″ (100 cm). Size: Dia 50cm: ∅ 19.7″ (150 cm). 10 heads Size: Dia 75cm: ∅ 29.5″ (200 cm). 12 heads Size: Dia 80cm: ∅ 31.5″ (200 cm). 15 heads Size: Dia 100cm: ∅ 39.4″ (250 cm) |
|---|---|
| Wire length | 78.7″ (200 cm), extendable on request |
| Weight | 4.4 lbs (2 kg) |
| Light source | LED or halogen bulb (G4) |
| Base | Pluggable G4 |
| Power | ~3W (single) |
| Voltage | AC 110-240V |
| Control | Push-button switch; default bulb is not dimmable |
| Mounting | Ceiling |
| Environment | Indoor |
| Materials | Metal, brass, stainless steel |
| Finish | Gold |
| Shade color | Brass |
| Process | Cut, polished, electroplated |





Brass1 head: ∅ 11.8″ x H 2.7″ / Dia 30cm x H 7cm
Brass3 heads: ∅ 15.7″ x H 39.4″ / Dia 40cm x H 100cm
Brass6 heads: ∅ 19.7″ x H 59″ / Dia 50cm x H 150cm
Brass10 heads: ∅ 29.5″ x H 78.7″ / Dia 75cm x H 200cm
Brass12 heads: ∅ 31.5″ x H 78.7″/ Dia 80cm x H 200cm
Brass15 heads: ∅ 39.4″ x H 98.4″/ Dia 100cm x H 250cm
Monulo · The practical guide
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 · Get the scale right
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 · Look up
The available drop matters as much as the fixture diameter.
Around 8 ft / 2.44 m
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Around 9–10 ft / 2.74–3.05 m
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Let the furniture define the focal point.
Room study 02
Plan the whole row before choosing the quantity.
Room study 03
Use the room formula as a visual starting point.
Room study 04
A consistent rhythm works better than a crowded ceiling.
Room study 05
Put comfortable facial lighting first.
Room study 06
Choose the height from where you actually sit.
Room study 07
Light the page without exposing the source.
03 · Before the tools come out
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 · The last few details
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.
Black Friday Sale
November 12–30 · one code per order
Copy the code that matches your cart, then paste it at checkout.
Before you order