Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Details
Close views show the alabaster’s cloudy grain, the rounded end of the shade, and the metal dome where it meets the stone
Rod pendant light
A pill-shaped natural alabaster capsule hangs from a rigid dark bronze rod, topped by a domed metal cap and a small sphere, with a tiny finial beneath. The shade is closed at the bottom, so the light glows outward through the stone rather than shining straight down. It can hang as one pendant or as a staggered cluster of capsules from a round ceiling plate
Highlights
A closed alabaster capsule on rigid dark bronze hardware, offered alone or in a pre-cut staggered cluster
Each shade is a pill-shaped piece of natural alabaster, closed at the bottom so light spreads outward through the stone
Choose one pendant or a cluster of 3, 5, 7, 9, or 11 capsules on a round ceiling plate, with each rod pre-cut to a different length
A non-replaceable warm white 3000K LED is built into each dome cap. The standard version uses a wall switch; a dimmable version must be requested when ordering
The ceiling plate, rods, dome caps, and finials come only in dark bronze, paired with natural alabaster that can vary slightly from piece to piece
Specifications
| Height | One capsule shade, Φ15 ×: ∅ 5.9″ (35 cm). Φ15 ×: ∅ 5.9″ (35 cm) |
|---|---|
| Capsule diameter | 5.9″ (15 cm) |
| Capsule height | 13.8″ (35 cm) |
| Ceiling plate diameter | 3-light: 11.8″ (30 cm). 5-light: 13.8″ (35 cm). 7-light: 17.7″ (45 cm). 9-light: 19.7″ (50 cm). 11-light: 19.7″ (50 cm) |
| Overall drop | 3-light: 59.1″ (150 cm). 5-light: 78.7″ (200 cm). 7-light: 98.4″ (250 cm). 9-light: 118.1″ (300 cm). 11-light: 137.8″ (350 cm) |
| Single rod length | Not given; confirm before ordering |
| Configurations | Single, or 3-, 5-, 7-, 9-, or 11-light cluster |
| Light source | Integrated LED, non-replaceable |
| Color temperature | Warm white 3000K |
| Voltage | AC 110–240V |
| Control | Standard wall switch; dimmable version available if specified at order |
| Included bulb | Not applicable |





Black & White · Warm Light∅5.9″ × H13.8″
Black & White · Warm Light3-Light ∅11.8″ × 59.1″
Black & White · Warm Light5-Light ∅13.8″ × 78.7″
Black & White · Warm Light7-Light ∅17.7″ × 98.4″
Black & White · Warm Light9-Light ∅19.7″ × 118.1″
Black & White · Warm Light11-Light ∅19.7″ × 137.8″
Monulo · The practical guide
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 · Get the scale right
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 · Look up
The available drop matters as much as the fixture diameter.
Around 8 ft / 2.44 m
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Around 9–10 ft / 2.74–3.05 m
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Let the furniture define the focal point.
Room study 02
Plan the whole row before choosing the quantity.
Room study 03
Use the room formula as a visual starting point.
Room study 04
A consistent rhythm works better than a crowded ceiling.
Room study 05
Put comfortable facial lighting first.
Room study 06
Choose the height from where you actually sit.
Room study 07
Light the page without exposing the source.
03 · Before the tools come out
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 · The last few details
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.
Black Friday Sale
November 12–30 · one code per order
Copy the code that matches your cart, then paste it at checkout.
Before you order