Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Details
Close views show cloudy light in the stone, a brass corner on the cube, and a dark canopy above a clear stem
Alabaster Pendant
Small brass-capped cubes of alabaster hang on their own thin wires, ready to gather as a loose cluster or drop in a staggered line. The stone spreads light evenly through each face, so the cubes glow from within instead of throwing a direct beam. In a 6-, 8-, or 10-light group, the pendant can sit over a dining table or run the length of an island or gallery wall
Highlights
Genuine alabaster cubes with gold hardware, each hung on its own wire in a 6-, 8-, or 10-light group
Each cube is genuine alabaster quarried in Spain, not resin or faux-alabaster glass. Veining and tone vary naturally from piece to piece
The group scales from a compact dining pendant to a longer installation over an island or gallery wall
Each cube takes one G9 bulb, LED or Edison, not included. A warm-white 2700-3000K LED gives the truest reading of the stone
Hardware is gold, and the cubes are white alabaster, each finished with a brass corner cap at the top
Specifications
| Height | 3-Head ā Dia 20 cm Ć: ā 7.9ā³ (150 cm). 5-Head ā Dia 30 cm Ć: ā 11.8ā³ (200 cm). 7-Head ā Dia 35 cm Ć: ā 13.8ā³ (250 cm). 9-Head ā Dia 40 cm Ć: ā 15.7ā³ (300 cm). 11-Head ā Dia 45 cm Ć: ā 17.7ā³ (350 cm). 15-Head ā Dia 50 cm Ć: ā 19.7ā³ (400 cm) |
|---|---|
| Spread | 6-light: 27.6ā³ (70 cm). 8-light: 37.8ā³ (96 cm). 10-light: 47.2ā³ (120 cm) |
| Weight | 6-light: ~29 lbs (13 kg). 8-light: ~37 lbs (17 kg). 10-light: ~46 lbs (21 kg) |
| Cord | 59ā³ per wire, adjustable |
| Source | G9, LED or Edison, one per cube (not included) |
| Recommended bulb | Warm-white 2700-3000K G9 LED |








Gold & White6-Lights ā 27.6ā³ x H 3.9ā³
Gold & White8-Lights ā 37.8ā³ x H 3.9ā³
Gold & White10-Lights ā 47.2ā³ x H 3.9ā³
Gold & WhiteRound 3-Lights ā 7.9ā³ x H 59ā³
Gold & WhiteRound 5-Lights ā 11.8ā³ x H 78.7ā³
Gold & WhiteRound 7-Lights ā 13.8ā³ x H 98.4ā³
Gold & WhiteRound 9-Lights ā 15.7ā³ x H 118ā³
Gold & WhiteRound 11-Lights ā 17.7ā³ x H 138ā³
Gold & WhiteRound 15-Lights ā 19.7ā³ x H 157ā³
Monulo Ā· The practical guide
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 Ā· Get the scale right
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 Ā· Look up
The available drop matters as much as the fixture diameter.
Around 8 ft / 2.44 m
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Around 9ā10 ft / 2.74ā3.05 m
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Let the furniture define the focal point.
Room study 02
Plan the whole row before choosing the quantity.
Room study 03
Use the room formula as a visual starting point.
Room study 04
A consistent rhythm works better than a crowded ceiling.
Room study 05
Put comfortable facial lighting first.
Room study 06
Choose the height from where you actually sit.
Room study 07
Light the page without exposing the source.
03 Ā· Before the tools come out
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 Ā· The last few details
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the roomās other light sources separately.
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.
Black Friday Sale
November 12ā30 Ā· one code per order
Copy the code that matches your cart, then paste it at checkout.
Before you order