Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Details
Close views show the speckled ribbed surface, the beaded finial, and the seam where the lid meets the body
Fluted ceramic vase
Vertical channels run around each ceramic form, and a fine gold line follows the raised ridges instead of crossing them. Two poured glaze layers pool in the grooves, so speckling, tone, and thickness vary from piece to piece. The lidded jar, handled pitcher, and two shorter arched-base forms suit a console, kitchen island, mantel, dresser, vanity, or open shelf
Highlights
Every piece is ceramic with a poured glaze and gold-lined flutes; the silhouettes and heights are what change
The glaze is poured in two layers rather than sprayed, so it runs and pools, with real variation in speckling, tonal depth, and how thickly it sits in the flutes
A fine gold line is drawn along the raised ribs, so the flutes read as defined vertical edges instead of blending into the body
Choose a 48 cm lidded jar with a stacked-bead finial, a handled pitcher, or a short arched-base piece at 20.5 cm or 29.5 cm
The finish is mottled greige-cream with gold lines, and slight differences in speckling and line work are expected, not a defect
Specifications
| Height | Lidded jar with finial · Dia 25.5 cm × including lid ( × ): 48 cm |
|---|---|
| Diameter | Lidded jar with finial · Dia 25.5 cm × including lid ( × ): 10 ″ |
| Height | Lidded jar with finial · Dia 25.5 cm × including lid ( × ): 18.9 ″ |
| Width | Handled pitcher form · × × , width measured across the handle ( × × ): 23.5 cm |
| Depth | Handled pitcher form · × × , width measured across the handle ( × × ): 20.5 cm |
| Height | Handled pitcher form · × × , width measured across the handle ( × × ): 30.5 cm |
| Width | Handled pitcher form · × × , width measured across the handle ( × × ): 9.3 ″ |
| Depth | Handled pitcher form · × × , width measured across the handle ( × × ): 8.1 ″ |
| Height | Handled pitcher form · × × , width measured across the handle ( × × ): 12 ″. Short arched-base form · Dia 15 cm × ( × ): 20.5 cm |
| Diameter | Short arched-base form · Dia 15 cm × ( × ): 5.9 ″ |
| Height | Short arched-base form · Dia 15 cm × ( × ): 8.1 ″. Tall arched-base form · Dia 18 cm × ( × ): 29.5 cm |
| Diameter | Tall arched-base form · Dia 18 cm × ( × ): 7.1 ″ |
| Height | Tall arched-base form · Dia 18 cm × ( × ): 11.6 ″. Dia 25.5 cm ×: 48 cm |
| Width | × ×: 23.5 cm |
| Depth | × ×: 20.5 cm |
| Height | × ×: 30.5 cm. Dia 15 cm ×: 20.5 cm. Dia 18 cm ×: 29.5 cm |
| Fit note | Dimensions are approximate; ceramic moves in the kiln |
| Type | Decorative ceramic vase; Style A is a lidded jar |
| Sold as | Individually — Style A, B, D, or E. Style A ships with its lid |
| Material | Ceramic |
| Glaze | Two-layer poured glaze |
| Detailing | Gold lining drawn along the raised flutes |
| Color | Mottled greige-cream with gold lines |
| Style A | Fluted lidded jar with stacked-bead finial |
| Style B | Fluted pitcher with handle |
| Styles D and E | Fluted forms with arched relief at the base |
| Cleaning | Dust with a soft, dry cloth, or wipe gently with a damp cloth and dry |
| Gold lines | Keep abrasives and scouring pads off; the gold wears before the glaze |
| Design style | French Country, Grandmillennial, Vintage European, Fluted, Traditional |
| Best for | Dining room table, kitchen island, entryway console, fireplace mantel, bedroom dresser, open shelving, bathroom vanity |



Mottled greige-creamModel A Dia 25.5cm x H 48cm / ∅ 10″ x H 18.9″
Mottled greige-creamModel B Dia 23.5cm x H 30.5cm / ∅ 9.3″ x H 12″
Mottled greige-creamModel D Dia 15cm x H 20.5cm / ∅ 5.9″ x H 8.1″
Mottled greige-creamModel E Dia 18cm x H 29.5cm / ∅ 7.1″ x H 11.6″
Monulo · The practical guide
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 · Get the scale right
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 · Look up
The available drop matters as much as the fixture diameter.
Around 8 ft / 2.44 m
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Around 9–10 ft / 2.74–3.05 m
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Let the furniture define the focal point.
Room study 02
Plan the whole row before choosing the quantity.
Room study 03
Use the room formula as a visual starting point.
Room study 04
A consistent rhythm works better than a crowded ceiling.
Room study 05
Put comfortable facial lighting first.
Room study 06
Choose the height from where you actually sit.
Room study 07
Light the page without exposing the source.
03 · Before the tools come out
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 · The last few details
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.
Black Friday Sale
November 12–30 · one code per order
Copy the code that matches your cart, then paste it at checkout.
Before you order