Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Details
Three close views show the creamy veined surface, a rounded edge, and where the sculpted form meets its column
Alabaster Table Lamp
A clean sculptural form pairs a white alabaster shade with a gold metal body. Soft translucency and natural veining let a warm, calming glow spread outward, adding depth and texture. It sits easily on a bedside table or console as both a light and a quiet focal piece
Highlights
Metal and alabaster come in two sizes, each matched to its own bulb base
The body is metal and the shade is alabaster. Veining and pattern vary from one piece to the next, so each lamp differs from the pictures
The metal body is gold, and the alabaster shade is white
One size is 7.9 inches across and 11 inches high. The other is 11.8 inches across and 16.5 inches high
Bulbs are not included. The smaller size takes an E12 or E14 bulb up to 15W; the larger takes an E26 or E27 bulb up to 40W. An in-line switch turns it on and off
Specifications
| Height | Size: Dia 20 cm: ∅ 7.9″ (28 cm). Size: Dia 30 cm: ∅ 11.8″ (42 cm) |
|---|---|
| Bulbs | Not included |
| Bulb base | E12 or E14, max 15W; E26 or E27, max 40W |
| Voltage | AC 110-240V |
| Switch | In-line on/off |
| Cord | 59″ (150 cm) with switch plug |
| Environment | Indoor |

White · US Plug∅7.9″ x H 11″ / Dia 20 cm x H 28 cm
White · US Plug∅11.8″ x H 16.5″ / Dia 30 cm x H 42 cm
Monulo · The practical guide
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 · Get the scale right
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 · Look up
The available drop matters as much as the fixture diameter.
Around 8 ft / 2.44 m
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Around 9–10 ft / 2.74–3.05 m
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Let the furniture define the focal point.
Room study 02
Plan the whole row before choosing the quantity.
Room study 03
Use the room formula as a visual starting point.
Room study 04
A consistent rhythm works better than a crowded ceiling.
Room study 05
Put comfortable facial lighting first.
Room study 06
Choose the height from where you actually sit.
Room study 07
Light the page without exposing the source.
03 · Before the tools come out
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 · The last few details
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.
Black Friday Sale
November 12–30 · one code per order
Copy the code that matches your cart, then paste it at checkout.
Before you order