Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Details
Three close views of the cream floral surround where the carving, the smooth plate, and the glowing globe meet
Ceiling flush mount
A gypsum-resin surround is carved as a loose cluster of petals and leaves or as one large bloom with deep radial ridges. A frosted opal globe at the center softens the light into an even glow across the carving. The fixture sits flush to the ceiling, with no pendant drop
Highlights
Two silhouettes and three hand-applied finishes share one central opal globe
The composite is carved and sanded by hand, so petal veins, leaf edges, and fine surface texture vary slightly from piece to piece
Bouquet is 11.4″ across and 7.5″ high; Floral Crown is 11.8″ across and 7.9″ high. Both use the same 18 cm base plate
One G9 bi-pin socket, rated 12W, shines through a fixed frosted opal globe, 11 cm across, for a soft, even glow
Ivory white, matte black, and gilded gold are each applied by hand after carving
Specifications
| Diameter | This fi ture hardwires directly to the ceiling junction bo . It is not plug-in. A licensed electrician is recommended. Turn off power at the breaker before installation. The base plate mounts flush to the ceiling: 18 cm. A frosted opal glass ball globe () sits at the center of the carved surround — it diffuses the G9 light into a soft, even glow. The globe is a fi ed element of the design and is not sold separately: 11 cm |
|---|---|
| Height | Body: Ø29 × (11.4″ × 7.5″) · Base plate: · Globe: 19 cm |
| Diameter | Body: Ø29 × (11.4″ × 7.5″) · Base plate: · Globe: 18 cm. Body: Ø29 × (11.4″ × 7.5″) · Base plate: · Globe: 11 cm |
| Height | Ø29 ×: 19 cm. Ø30 ×: 20 cm |
| Diameter | Opal frosted glass · · fi ed (not removable): 11 cm |
| Height | Bouquet ( -80202): Ø29 × (11.4″ × 7.5″): 19 cm. Floral Crown ( -80201): Ø30 × (11.8″ × 7.9″): 20 cm |
| Diameter | Turn off power at the breaker before installation. A licensed electrician is recommended for all hardwired ceiling connections. The base plate mounts directly to the junction bo: 18 cm. It hardwires directly to the ceiling junction bo with no pendant drop. The base plate mounts flush. A licensed electrician is recommended. Turn off power at the breaker before installation: 18 cm |
| Base plate | 18 cm |
| Globe | 11 cm |
| Source | G9 bi-pin, 12W |
| Sockets | 1 |
| Globe | Opal frosted glass, fixed |
| Mounting | Hardwired flush mount, no pendant drop |





WhiteØ 11.4″ × H 7.5″
GoldØ 11.4″ × H 7.5″
BlackØ 11.4″ × H 7.5″
WhiteØ 11.8″ × H 7.9″
GoldØ 11.8″ × H 7.9″
BlackØ 11.8″ × H 7.9″
Monulo · The practical guide
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 · Get the scale right
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 · Look up
The available drop matters as much as the fixture diameter.
Around 8 ft / 2.44 m
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Around 9–10 ft / 2.74–3.05 m
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Let the furniture define the focal point.
Room study 02
Plan the whole row before choosing the quantity.
Room study 03
Use the room formula as a visual starting point.
Room study 04
A consistent rhythm works better than a crowded ceiling.
Room study 05
Put comfortable facial lighting first.
Room study 06
Choose the height from where you actually sit.
Room study 07
Light the page without exposing the source.
03 · Before the tools come out
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 · The last few details
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.
Black Friday Sale
November 12–30 · one code per order
Copy the code that matches your cart, then paste it at checkout.
Before you order