Vintage Glass Pendant Light with Textured, Seeded, Blue or Smoked Glass, Gold, Black or Chrome Finish for Kitchens, Dining Rooms and Bedrooms

Textured Glass Pendant Light

Details that keep the form legible.

A closer view brings the glass shade and the adjustable suspension into focus. It lends structure to the composition beside a bed.

Adjustable hanging height.
E26 socket, 60W maximum.
Textured glass shade with Gold, Black, or Chrome metal finish options.

Craft Details

Details that hold the design together

With the light on, the same form reads as a softer focal point in the room.

Ceiling Canopy and Chain

The canopy and suspension create a neat ceiling connection while allowing the hanging profile to be set for a dining table or island.

Glass and Metal Assembly

A visible metal collar and support bar frame the shade, keeping the fitting visually balanced above a surface.

Glass Shade Profile

Clear glass reveals the softly shaped edge and the visual texture of the selected shade finish.

Ceiling Canopy and Chain

A clean canopy and adjustable suspension create a considered ceiling connection.

Glass and Metal Assembly

The collar and support bar balance the glass shade.

Glass Shade Profile

The clear glass edge shows the shade texture and profile.

‹› ‹› ‹›

Room Inspiration

Surface, frame and connection.

The pendant’s varied glass surface gives a room a clear focal point without overwhelming the furniture below.

Bedrooms and Quiet Corners

Bring a light, tailored accent to bedrooms, entryways, reading nooks, and relaxed corners.

Dining and Gathering Areas

Place one above a dining table, or use a repeated arrangement above a larger shared surface for a coordinated focal point.

Kitchen and Transitional Areas

Set the adjustable height over a kitchen island, corridor, or table so the pendant provides a visible vertical accent without crowding the room.

Bedrooms and Quiet Corners

In a bedroom or reading corner, the textured shade adds a delicate visual layer near the bed or chair.

Dining and Gathering Areas

Over a dining table, the glass profile gives the arrangement a distinct centre; repeated pendants can extend that effect across a wider surface.

Kitchen and Transitional Areas

Adjust the suspension for an island, corridor, or everyday table, using the shade’s clear outline to define the area.

‹› ‹› ‹›

Product Character

Glass texture from every angle.

Subtle variation across the glass gives the pendant a tactile appearance that sits naturally in a bedroom, dining room, or kitchen.

Decorative GlassThe softly varied texture, created by hand-hammering the lampshade, catches and reshapes the light across the glass.
Hand-Forged DetailsHand-shaped metalwork gives the suspension a grounded, crafted finish.

In Real Light

See the glass respond to light.

Photos capture the shape; video reveals how light moves across the textured glass and the metal line, as well as how the pendant hangs. See how it could look above a table, island, or bedside.

Product Specifications

Designed for flexible placement.

7.1 inch / 18 cm 11.8 inch / 30 cm

Material	Glass and Metal
Socket	E26
Voltage	100-240 V
Maximum Wattage	60W
Power Source	Hardwired
Installation	Indoor use
Hanging Length	Adjustable
Bulb Included	No
Shade (7.1 inch / 18 cm)	W 7.1 inch × H 11 inch / W 18 cm × H 28 cm
Shade (11.8 inch / 30 cm)	W 11.8 inch × H 15 inch / W 30 cm × H 38 cm

This fixture uses one E26 bulb. Bulb is not included.

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Language

Sign in

Reset your password

Vintage Glass Pendant Light with three metal finishes and blue or smoked glass

12% OFF

15% OFF

18% OFF

$60 OFF

$100 OFF

Question

Shipping info

Details that keep the form legible.

Details that hold the design together

Ceiling Canopy and Chain

Glass and Metal Assembly

Glass Shade Profile

Ceiling Canopy and Chain

Glass and Metal Assembly

Glass Shade Profile

Surface, frame and connection.

Bedrooms and Quiet Corners

Dining and Gathering Areas

Kitchen and Transitional Areas

Bedrooms and Quiet Corners

Dining and Gathering Areas

Kitchen and Transitional Areas

Glass texture from every angle.

See the glass respond to light.

Designed for flexible placement.

Customer Reviews

Lighting that fits.A room that feels right.

A useful starting point, in seconds.

Work with your ceiling.

Keep it close

Balance the drop

Scale with intention

Dining table

Kitchen island

Room center

Hallway & entry

Bathroom vanity

Bedroom & bedside

Reading & living

One installation checklist.

Mock up the final position

Verify the mounting

Match the electrical details

Questions before you choose.

A little measuring. A better fit.

You May Also Like

Lighting that fits.
A room that feels right.