Beleuchtungsverkauf zum Tag der Arbeit: 20 % Rabatt sichern
USD

Sprache

Deutsch

Monulo
Wagen 0 Artikel $0.00
Wagen 0 Artikel $0.00
Zuhause
Geschäft
Wunschliste
Startseite
Beleuchtungskategorien
Vorgestellte Serien
Bestseller
Mehr entdecken
Heimdekorationen
Schneller Versand
  1. Zuhause
  2. 260715-260722 ALL TB Choice
  3. Antiker Schrankgriff aus Messing
Single-hole antique brass cabinet handle
Antique brass cabinet handle in a warm modern interior
Antique brass handles installed on white drawers
Paired antique brass handles on cabinet doors
Antiker Schrankgriff aus Messing
Antique brass cabinet pull with 1.26-inch center-to-center mounting
Stepped solid brass form and antique textured finish
Rounded handle end and layered antique brass form
Antique brass mounting post and base connection detail
Bild in Gallery-Viewer laden, Single-hole antique brass cabinet handle
Bild in Gallery-Viewer laden, Antique brass cabinet handle in a warm modern interior
Bild in Gallery-Viewer laden, Antique brass handles installed on white drawers
Bild in Gallery-Viewer laden, Paired antique brass handles on cabinet doors
Bild in Gallery-Viewer laden, Antiker Schrankgriff aus Messing
Bild in Gallery-Viewer laden, Antique brass cabinet pull with 1.26-inch center-to-center mounting
Bild in Gallery-Viewer laden, Stepped solid brass form and antique textured finish
Bild in Gallery-Viewer laden, Rounded handle end and layered antique brass form
Bild in Gallery-Viewer laden, Antique brass mounting post and base connection detail

Antiker Schrankgriff aus Messing

$59.00

12% RABATT

1 kaufen

M12

15% RABATT

2 kaufen

M15

18% RABATT

3 oder mehr kaufen

M18

$60 RABATT

Bestellungen über 330 $

M60

$100 RABATT

Bestellungen über 500 $

M100
Nur noch 9999 Artikel auf Lager
Frage

Frage

Versandinformationen

Versandinformationen

Rückgaberecht: Sie haben nach Erhalt Ihrer Bestellung 14 Tage Zeit, eine Rückgabe anzufordern.

Verfügbarkeit: Wir versenden in die Vereinigten Staaten.

Bearbeitungszeit: Die Bearbeitungszeit für Bestellungen beträgt 1–2 Werktage (Montag bis Freitag).

Teilen
Kostenloser Versand
14 Tage Rückgaberecht
Sichere Zahlung
Kundenservice
  • Beschreibung
  • Bewertung
  • Lighting Size Guide
Beschreibung

Craft & Finish

Sculpted Character in Solid Brass

A softly aged finish settles into every curve and step, giving each handle depth without hiding the weight and clarity of its solid brass form.

Stepped solid brass form and antique textured finish
Layered geometryBalanced steps create a compact silhouette with architectural rhythm.
Rounded handle end and layered antique brass form
Softly rounded edgesComfortable contours bring warmth to the strong geometric profile.
Antique brass mounting post and base connection detail
Solid connectionThe mounting post and flared base continue the same aged brass character.
Paired antique brass handles on cabinet doors

A Quiet Point of Contrast

A Small Detail That Grounds the Room

Against painted cabinetry, natural wood, or stone, antique brass adds a collected sense of depth. Use it on kitchen doors, wardrobe panels, drawers, or a restored piece of furniture to create a finish that feels considered rather than new.

Choose Your Mounting Style

Specifications & Options

Material Solid brass
Finish Antique Brass
Mounting types Single Hole; Double Holer
Size Single Hole:
diameter 9 mm / 0.4″;
height 32 mm / 1.3″;
length 38 mm / 1.5″

Double Hole:
hole spacing 32 mm / 1.3″;
height 34 mm / 1.3″;
length 54 mm / 2.1″
Use Cabinet doors, drawers, wardrobes, and furniture
Sales unit 1 handle
Care Wipe with a soft dry cloth; avoid abrasive cleaners
Single-hole antique brass cabinet handle
Single HoleCompact one-post mounting for cabinet doors and drawers.
Antique brass cabinet pull with 1.26-inch center-to-center mounting
1.26" Center-to-CenterTwo-post mounting with 32 mm center-to-center spacing.
Bewertung

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Lighting Size Guide

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size
CLEARANCESIZE↔PROPORTION · PLACEMENT

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Starting fixture diameter

26 in / 66 cm

With a 9 ft ceiling, a 7 ft clear path leaves about 24 in for the complete drop.

Complete drop = canopy + suspension + fixture body. This is a planning allowance, not a product specification.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 inTABLETOP → LOWEST POINT
30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure
Measure the tabletop, including its width at the widest point.
Size & place
For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check
Center on the table and check the view across it while seated.
30–36 inEVEN CENTERS · CLEAR SHADE GAPSCHECK THE FULL ROW BEFORE DRILLING
30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure
Record counter length, width and the working area below.
Size & place
Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check
Mark equal centers; verify the actual gap between shades rather than using center spacing alone.
ROOM LENGTH12 ft + 14 ft → ABOUT 26 in WIDE
Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure
Record length, width and finished ceiling height.
Size & place
Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check
Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.
LAY OUT EQUAL BAYSEND OFFSET ≈ HALF THE CENTER SPACING
Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure
Mark the full walking route, doors and changes in ceiling height.
Size & place
Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check
Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.
MATCH THE USER’S FACE LEVELSCONCE CENTER ≈ 65–70 in ABOVE FLOOR
Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure
Record mirror dimensions, side wall space and cabinet swing.
Size & place
For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check
Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.
TEST FROM A SEATED POSITIONSHADE HIDES THE BULB · SWITCH WITHIN REACH
Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure
Measure the mattress, nightstand and your seated position.
Size & place
Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check
Check reach to the switch, head movement, pillows and any adjustable arm.
LIGHT FROM BESIDE OR BEHINDKEEP THE BULB OUT OF DIRECT VIEW
A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure
Sit in your usual chair with a book before locating the lamp.
Size & place
Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check
Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Make it your own

A little measuring. A better fit.

Keep your dimensions close while you compare your shortlist.

Ask Monulo

Das könnte Ihnen auch gefallen

Designs, die Sie lieben,
Qualität, der Sie vertrauen können.
Bei Monulo sind wir der Meinung, dass Beleuchtung mehr tun sollte, als nur einen Raum zu erhellen – sie sollte Ihnen das Gefühl geben, zu Hause zu sein. Unsere Designs vereinen zeitlosen Stil und verlässliche Qualität, damit Sie Stücke genießen können, die Sie wirklich lieben und denen Sie vertrauen, dass sie lange halten.