Beleuchtungsverkauf zum Tag der Arbeit: 20 % Rabatt sichern
- 18%
One head green jade cylinder pendant lamp with 2.36 inch / 6 cm shade
Single green jade cylinder pendant light glowing beside framed botanical wall art and flowers
Two head green jade cylinder pendant lamp with 3.9 inch / 10 cm shades
Two green jade cylinder pendant lights installed above a small dining table by an arched window
Two green jade cylinder pendant lights above a warm wood and marble dining table
One head green jade cylinder pendant lamp with 3.9 inch / 10 cm shade
Two head green jade cylinder pendant lamp with 2.36 inch / 6 cm shades
Two green jade cylinder pendant lights installed in a bright studio dining room
Close product view of the green jade cylinder shade with brass tone top hardware
Close view of the polished green jade cylinder shade texture and lower rim
Bild in Gallery-Viewer laden, One head green jade cylinder pendant lamp with 2.36 inch / 6 cm shade
Bild in Gallery-Viewer laden, Single green jade cylinder pendant light glowing beside framed botanical wall art and flowers
Bild in Gallery-Viewer laden, Two head green jade cylinder pendant lamp with 3.9 inch / 10 cm shades
Bild in Gallery-Viewer laden, Two green jade cylinder pendant lights installed above a small dining table by an arched window
Bild in Gallery-Viewer laden, Two green jade cylinder pendant lights above a warm wood and marble dining table
Bild in Gallery-Viewer laden, One head green jade cylinder pendant lamp with 3.9 inch / 10 cm shade
Bild in Gallery-Viewer laden, Two head green jade cylinder pendant lamp with 2.36 inch / 6 cm shades
Bild in Gallery-Viewer laden, Two green jade cylinder pendant lights installed in a bright studio dining room
Bild in Gallery-Viewer laden, Close product view of the green jade cylinder shade with brass tone top hardware
Bild in Gallery-Viewer laden, Close view of the polished green jade cylinder shade texture and lower rim

Grüne Jade Zylinder Pendelleuchte

$307.50 $249.99

12% RABATT

1 kaufen

M12

15% RABATT

2 kaufen

M15

18% RABATT

3 oder mehr kaufen

M18

$60 RABATT

Bestellungen über 330 $

M60

$100 RABATT

Bestellungen über 500 $

M100
Nur noch 9999 Artikel auf Lager
Frage

Frage

Versandinformationen

Versandinformationen

Rückgaberecht: Sie haben nach Erhalt Ihrer Bestellung 14 Tage Zeit, eine Rückgabe anzufordern.

Verfügbarkeit: Wir versenden in die Vereinigten Staaten.

Bearbeitungszeit: Die Bearbeitungszeit für Bestellungen beträgt 1–2 Werktage (Montag bis Freitag).

Kostenloser Versand
14 Tage Rückgaberecht
Sichere Zahlung
Kundenservice

Jade-green glow

A compact cylinder pendant lamp with deep green stone texture and warm brass-tone detail.

The polished shade brings a natural jade-like pattern to dining corners, bars, bedside areas, and quiet studio spaces while the slim hanging cord keeps the silhouette light.

Full view of the single green jade cylinder pendant lamp with cord and brass tone canopy
Green jade cylinder shade with brass tone top hardware

Polished cylinder shade

The rounded stone-textured form keeps the pendant crisp, compact, and easy to repeat above a counter or table.

Close jade pattern and lower shade rim detail

Natural green pattern

Dark and translucent green veining gives each shade visual depth when lit or unlit.

Brass tone canopy and twisted hanging cord on one head pendant

Brass-tone hanging detail

A warm metal canopy and twisted cord finish frame the green shade without adding visual weight.

Made for layered rooms

Use one as a quiet accent or pair two for a balanced dining glow.

The green cylinder shade works especially well with wood furniture, warm plaster walls, indoor plants, framed art, and small round dining tables. Choose one head for a focused corner or two heads when the room needs a more composed ceiling feature.

Two green jade cylinder pendant lights above a small dining table

Options and specifications

Select the head count and shade size for the scale of your space.

Shade color Green with natural stone-style veining
Hardware finish Warm brass-tone canopy and hanging hardware
Head options 1 Head or 2 Heads
Shade sizes 2.36 in / 6 cm and 3.9 in / 10 cm diameter options
Recommended spaces Dining nook, kitchen island, bedside, bar counter, entryway, cafe, studio
Installation Ceiling-mounted pendant light. Professional installation recommended for local electrical standards.
Care Dust with a soft dry cloth. Avoid abrasive cleaners on the polished shade and metal finish.
1 Head green jade pendant lamp in 2.36 inch / 6 cm size
1 Head · 2.36 in / 6 cm · Green
1 Head green jade pendant lamp in 3.9 inch / 10 cm size
1 Head · 3.9 in / 10 cm · Green
2 Heads green jade pendant lamp in 2.36 inch / 6 cm size
2 Heads · 2.36 in / 6 cm · Green
2 Heads green jade pendant lamp in 3.9 inch / 10 cm size
2 Heads · 3.9 in / 10 cm · Green

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size
CLEARANCESIZE↔PROPORTION · PLACEMENT

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Starting fixture diameter

26 in / 66 cm

With a 9 ft ceiling, a 7 ft clear path leaves about 24 in for the complete drop.

Complete drop = canopy + suspension + fixture body. This is a planning allowance, not a product specification.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 inTABLETOP → LOWEST POINT
30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure
Measure the tabletop, including its width at the widest point.
Size & place
For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check
Center on the table and check the view across it while seated.
30–36 inEVEN CENTERS · CLEAR SHADE GAPSCHECK THE FULL ROW BEFORE DRILLING
30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure
Record counter length, width and the working area below.
Size & place
Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check
Mark equal centers; verify the actual gap between shades rather than using center spacing alone.
ROOM LENGTH12 ft + 14 ft → ABOUT 26 in WIDE
Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure
Record length, width and finished ceiling height.
Size & place
Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check
Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.
LAY OUT EQUAL BAYSEND OFFSET ≈ HALF THE CENTER SPACING
Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure
Mark the full walking route, doors and changes in ceiling height.
Size & place
Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check
Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.
MATCH THE USER’S FACE LEVELSCONCE CENTER ≈ 65–70 in ABOVE FLOOR
Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure
Record mirror dimensions, side wall space and cabinet swing.
Size & place
For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check
Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.
TEST FROM A SEATED POSITIONSHADE HIDES THE BULB · SWITCH WITHIN REACH
Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure
Measure the mattress, nightstand and your seated position.
Size & place
Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check
Check reach to the switch, head movement, pillows and any adjustable arm.
LIGHT FROM BESIDE OR BEHINDKEEP THE BULB OUT OF DIRECT VIEW
A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure
Sit in your usual chair with a book before locating the lamp.
Size & place
Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check
Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.