Beleuchtungsverkauf zum Tag der Arbeit: 20 % Rabatt sichern
Natural leather dome pendant lamp with clear crystal drops
Vintage brown leather dome pendant lamp with red crystal drops
Deep green leather dome pendant lamp with clear crystal drops
Vintage brown leather dome pendant lamp without crystal drops
Deep green leather dome pendant lamp without crystal drops
Vintage brown three-light leather bar pendant without crystal drops
Deep green three-light leather bar pendant without crystal drops
Natural leather pendant above a dining table
Vintage brown leather pendant in a warm dining room
Deep green leather pendant beside a dining table
Deep green three-light pendant over a kitchen island
Vintage brown pendant over a kitchen island
Vintage brown three-light pendant in a kitchen
Deep green pendant in a dining kitchen
Deep green leather shade with metal fitting and stitched trim
Natural leather shade with clear crystal drops
Vintage brown leather shade with red crystal drops
Bild in Gallery-Viewer laden, Natural leather dome pendant lamp with clear crystal drops
Bild in Gallery-Viewer laden, Vintage brown leather dome pendant lamp with red crystal drops
Bild in Gallery-Viewer laden, Deep green leather dome pendant lamp with clear crystal drops
Bild in Gallery-Viewer laden, Vintage brown leather dome pendant lamp without crystal drops
Bild in Gallery-Viewer laden, Deep green leather dome pendant lamp without crystal drops
Bild in Gallery-Viewer laden, Vintage brown three-light leather bar pendant without crystal drops
Bild in Gallery-Viewer laden, Deep green three-light leather bar pendant without crystal drops
Bild in Gallery-Viewer laden, Natural leather pendant above a dining table
Bild in Gallery-Viewer laden, Vintage brown leather pendant in a warm dining room
Bild in Gallery-Viewer laden, Deep green leather pendant beside a dining table
Bild in Gallery-Viewer laden, Deep green three-light pendant over a kitchen island
Bild in Gallery-Viewer laden, Vintage brown pendant over a kitchen island
Bild in Gallery-Viewer laden, Vintage brown three-light pendant in a kitchen
Bild in Gallery-Viewer laden, Deep green pendant in a dining kitchen
Bild in Gallery-Viewer laden, Deep green leather shade with metal fitting and stitched trim
Bild in Gallery-Viewer laden, Natural leather shade with clear crystal drops
Bild in Gallery-Viewer laden, Vintage brown leather shade with red crystal drops

Rustikale Kuppel-Pendelleuchte aus Leder

$439.00

12% RABATT

1 kaufen

M12

15% RABATT

2 kaufen

M15

18% RABATT

3 oder mehr kaufen

M18

$60 RABATT

Bestellungen über 330 $

M60

$100 RABATT

Bestellungen über 500 $

M100
Nur noch 9999 Artikel auf Lager
Frage

Frage

Versandinformationen

Versandinformationen

Rückgaberecht: Sie haben nach Erhalt Ihrer Bestellung 14 Tage Zeit, eine Rückgabe anzufordern.

Verfügbarkeit: Wir versenden in die Vereinigten Staaten.

Bearbeitungszeit: Die Bearbeitungszeit für Bestellungen beträgt 1–2 Werktage (Montag bis Freitag).

Kostenloser Versand
14 Tage Rückgaberecht
Sichere Zahlung
Kundenservice

Leather, metal, and crystal details in a compact pendant silhouette

The shade pairs a stitched genuine leather surface with warm brass-tone metal hardware, giving the lamp a collected vintage mood without heavy ornament.

Leather, metal, and crystal details in a compact pendant silhouette
Leather, metal, and crystal details in a compact pendant silhouette
Leather, metal, and crystal details in a compact pendant silhouette

A warm focal point for rooms with wood, leather, and aged metal

The single pendant works well over a small table, beside a bed, or in a reading corner. The three-light bar creates a longer visual line over kitchen islands and dining tables.

A warm focal point for rooms with wood, leather, and aged metal
A warm focal point for rooms with wood, leather, and aged metal
A warm focal point for rooms with wood, leather, and aged metal
A warm focal point for rooms with wood, leather, and aged metal
A warm focal point for rooms with wood, leather, and aged metal
A warm focal point for rooms with wood, leather, and aged metal
A warm focal point for rooms with wood, leather, and aged metal

Choose by style, color, and size

Product Type Pendant light fixture
Shade Material Genuine leather
Hardware Brass-tone metal fitting
Dimensions Single shade: D 23 cm / 9.1 in. Three-light bar: L 100 cm / 39.4 in with D 23 cm / 9.1 in shades. H depends on the adjusted hanging cord.
Socket E27 socket; bulb not included
Installation Hardwired ceiling installation by a qualified electrician is recommended
Care Dust gently with a soft dry cloth; avoid harsh cleaners on leather and metal surfaces
Natural / crystal accent / D 23 cm / 9.1 in
Natural / crystal accent / D 23 cm / 9.1 in
Vintage Brown / red crystal / D 23 cm / 9.1 in
Vintage Brown / red crystal / D 23 cm / 9.1 in
Deep Green / crystal accent / D 23 cm / 9.1 in
Deep Green / crystal accent / D 23 cm / 9.1 in
Vintage Brown / no crystal / D 23 cm / 9.1 in
Vintage Brown / no crystal / D 23 cm / 9.1 in
Deep Green / no crystal / D 23 cm / 9.1 in
Deep Green / no crystal / D 23 cm / 9.1 in
Vintage Brown / L 100 cm / 39.4 in bar
Vintage Brown / L 100 cm / 39.4 in bar
Deep Green / L 100 cm / 39.4 in bar
Deep Green / L 100 cm / 39.4 in bar

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size
CLEARANCESIZE↔PROPORTION · PLACEMENT

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Starting fixture diameter

26 in / 66 cm

With a 9 ft ceiling, a 7 ft clear path leaves about 24 in for the complete drop.

Complete drop = canopy + suspension + fixture body. This is a planning allowance, not a product specification.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 inTABLETOP → LOWEST POINT
30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure
Measure the tabletop, including its width at the widest point.
Size & place
For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check
Center on the table and check the view across it while seated.
30–36 inEVEN CENTERS · CLEAR SHADE GAPSCHECK THE FULL ROW BEFORE DRILLING
30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure
Record counter length, width and the working area below.
Size & place
Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check
Mark equal centers; verify the actual gap between shades rather than using center spacing alone.
ROOM LENGTH12 ft + 14 ft → ABOUT 26 in WIDE
Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure
Record length, width and finished ceiling height.
Size & place
Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check
Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.
LAY OUT EQUAL BAYSEND OFFSET ≈ HALF THE CENTER SPACING
Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure
Mark the full walking route, doors and changes in ceiling height.
Size & place
Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check
Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.
MATCH THE USER’S FACE LEVELSCONCE CENTER ≈ 65–70 in ABOVE FLOOR
Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure
Record mirror dimensions, side wall space and cabinet swing.
Size & place
For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check
Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.
TEST FROM A SEATED POSITIONSHADE HIDES THE BULB · SWITCH WITHIN REACH
Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure
Measure the mattress, nightstand and your seated position.
Size & place
Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check
Check reach to the switch, head movement, pillows and any adjustable arm.
LIGHT FROM BESIDE OR BEHINDKEEP THE BULB OUT OF DIRECT VIEW
A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure
Sit in your usual chair with a book before locating the lamp.
Size & place
Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check
Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.