- 17%

Side view of antique brass wall sconce with oval textured glass shade

Antique brass textured glass wall sconce installed beside a bed

Antique brass textured glass wall sconce installed beside a vanity mirror

Antique brass glass wall sconce installed in a hallway

Antique brass textured glass wall sconce installed in a living room

Antique brass textured glass wall sconce on a white background

Close view of oval textured glass and antique brass frame detail

Close view of sculpted antique brass leaf backplate detail

Cargar imagen en el visor de la Galería, Side view of antique brass wall sconce with oval textured glass shade

Cargar imagen en el visor de la Galería, Antique brass textured glass wall sconce installed beside a bed

Cargar imagen en el visor de la Galería, Antique brass textured glass wall sconce installed beside a vanity mirror

Cargar imagen en el visor de la Galería, Antique brass glass wall sconce installed in a hallway

Cargar imagen en el visor de la Galería, Antique brass textured glass wall sconce installed in a living room

Cargar imagen en el visor de la Galería, Antique brass textured glass wall sconce on a white background

Cargar imagen en el visor de la Galería, Close view of oval textured glass and antique brass frame detail

Cargar imagen en el visor de la Galería, Close view of sculpted antique brass leaf backplate detail

Aplique de pared antiguo de latón con vidrio texturizado

$447.50 $369.99

Envío gratuito

Devoluciones en un plazo de 14 días

Pago seguro

Atención al cliente

Latón antiguo, cristal ovalado y detalles de hojas esculpidas.

Aplique de pared de cristal texturizado en latón antiguo

Una luminaria de pared compacta para estancias que necesitan un toque vintage más cálido, con una pantalla ovalada texturizada y una placa posterior botánica esculpida.

Detalles de cristal y latón

Cristal texturizado con placa posterior botánica tallada

Observa de cerca el cristal martillado, el tono de latón envejecido y el relieve de hojas que aportan a esta pequeña luminaria su carácter de inspiración francesa.

Pantalla ovalada de cristal texturizado

La superficie de cristal martillado difunde la luz y da a esta compacta luminaria de pared un aspecto más rico y lleno de matices.

Placa posterior con hojas esculpidas

El relieve botánico y el tono de latón envejecido crean un elemento decorativo en la pared incluso cuando la luz está apagada.

Inspiración para estancias

Un suave toque de luz en la pared para estancias clásicas

Colócala junto a la cama, sobre un aparador, a lo largo de un pasillo o cerca de un espejo de tocador, donde una pequeña luz de pared puede aportar calidez, volumen y carácter vintage.

Detalles del producto

Dimensiones, acabado e instalación

Tamaño: W 16 cm × H 30 cm / W 6.3" × H 11.8"
Acabado: Acabado de latón antiguo
Pantalla: Cristal texturizado
Casquillo de la bombilla: E14
Bombilla: Bombilla no incluida
Fabricación: Acabado mate pintado con aerosol
Voltaje: 111 V-240 V
Potencia: 5W
Materiales visibles: Cobre y cristal
Ideal para: Junto a la cama, dormitorio, pasillo, sala de estar, entrada, espejo del tocador e interiores clásicos
Instalación: Luminaria de pared con cableado fijo. Confirma el tipo de bombilla, el voltaje y los requisitos eléctricos locales antes de instalarla.

Aplique de pared de cristal texturizado en latón antiguo

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Aplique de pared antiguo de latón con vidrio texturizado

Aplique de pared de cristal texturizado en latón antiguo