Oferta de iluminación por el Día del Trabajo: disfruta de un 20 % de descuento
Bright brass half dome pendant 25 cm
Brushed brass half dome pendant light against a green wall
Bright brass half dome pendant 30 cm
Brass dome pendant light in a warm interior setting
Bright brass half dome pendant 40 cm
Half dome brass pendant light above a dining corner
Aged matte brass half dome pendant 30 cm
Close view of brushed brass dome shade finish
Aged matte brass half dome pendant 40 cm
Aged matte brass dome pendant light in a calm room
Aged brass half dome pendant with chain suspension 40 cm
Large aged matte brass dome pendant light with warm inner finish
Aged bright brass three-light half dome pendant 50 cm
Large aged brass dome pendant light with chain suspension
Close view of brass pendant stem and ceiling connection
Close view of rolled brass shade edge and brushed texture
Warm inner brass finish on dome pendant shade
Cargar imagen en el visor de la Galería, Bright brass half dome pendant 25 cm
Cargar imagen en el visor de la Galería, Brushed brass half dome pendant light against a green wall
Cargar imagen en el visor de la Galería, Bright brass half dome pendant 30 cm
Cargar imagen en el visor de la Galería, Brass dome pendant light in a warm interior setting
Cargar imagen en el visor de la Galería, Bright brass half dome pendant 40 cm
Cargar imagen en el visor de la Galería, Half dome brass pendant light above a dining corner
Cargar imagen en el visor de la Galería, Aged matte brass half dome pendant 30 cm
Cargar imagen en el visor de la Galería, Close view of brushed brass dome shade finish
Cargar imagen en el visor de la Galería, Aged matte brass half dome pendant 40 cm
Cargar imagen en el visor de la Galería, Aged matte brass dome pendant light in a calm room
Cargar imagen en el visor de la Galería, Aged brass half dome pendant with chain suspension 40 cm
Cargar imagen en el visor de la Galería, Large aged matte brass dome pendant light with warm inner finish
Cargar imagen en el visor de la Galería, Aged bright brass three-light half dome pendant 50 cm
Cargar imagen en el visor de la Galería, Large aged brass dome pendant light with chain suspension
Cargar imagen en el visor de la Galería, Close view of brass pendant stem and ceiling connection
Cargar imagen en el visor de la Galería, Close view of rolled brass shade edge and brushed texture
Cargar imagen en el visor de la Galería, Warm inner brass finish on dome pendant shade

Lámpara colgante de latón con forma de semidomo

$369.00

12% DE DESCUENTO

Compra 1

M12

15% DE DESCUENTO

Compra 2

M15

18% DE DESCUENTO

Compra 3 o más

M18

$60 DE DESCUENTO

Pedidos superiores a $330

M60

$100 DE DESCUENTO

Pedidos superiores a $500

M100
Solo quedan 9999 artículo(s) en stock
Pregunta

Pregunta

Información de envío

Información de envío

Política de devoluciones: Tienes 14 días después de recibir tu pedido para solicitar una devolución.

Disponibilidad: Realizamos envíos a Estados Unidos.

Tiempo de procesamiento: El tiempo de gestión del pedido es de 1 – 2 días hábiles (de lunes a viernes).

Envío gratuito
Devoluciones en un plazo de 14 días
Pago seguro
Atención al cliente

DETALLE DEL PRODUCTO DISPLAY

Pantallas abovedadas de latón cepillado, acabado interior cálido y suspensión colgante minimalista.

Esta lámpara colgante de media cúpula presenta una pantalla de latón de perfil limpio, con opciones de acabado brillante y envejecido para comedores, cocinas, estudios, mostradores de cafeterías, bares, tiendas de ropa e interiores de estilo loft.

Pantalla abovedada de latón cepillado
Pantalla abovedada de latón cepilladoLa pantalla metálica redondeada mantiene una silueta sencilla, mientras que la superficie de latón cepillado añade una textura visible.
Acabado interior cálido
Acabado interior cálidoEl tono de latón interior aporta a la lámpara colgante un carácter visual más cálido sin incluir una bombilla.
Suspensión con cable
Suspensión con cableEl cable delgado de la lámpara colgante mantiene limpia la línea del techo sobre encimeras, mesas y rincones de lectura.

HISTORIA DE INSPIRACIÓN

Latón vintage suave para rincones del comedor, islas de cocina, cafeterías y espacios de lectura.

Use la versión de 25 cm o 30 cm sobre encimeras compactas y rincones junto a la cama, y la versión de 40 cm sobre zonas de comedor o islas de cocina más grandes.

Latón vintage suave para rincones del comedor, islas de cocina, cafeterías y espacios de lectura.

ESPECIFICACIONES DEL PRODUCTO

Tamaños de las lámparas colgantes, opciones de acabado y especificaciones clave.

Revise los estilos de pantallas de latón disponibles a la izquierda y, después, consulte el tamaño, el material, el tamaño del paquete, la nota sobre la bombilla y los detalles de uso por habitación en la tabla de especificaciones.

Latón brillante / Pequeño 25 cm / 9,8 pulgadas
Latón brillante / Pequeño 25 cm / 9,8 pulgadas
Latón brillante / Mediano 30 cm / 11,8 pulgadas
Latón brillante / Mediano 30 cm / 11,8 pulgadas
Latón brillante / Grande 40 cm / 15,7 pulgadas
Latón brillante / Grande 40 cm / 15,7 pulgadas
Latón mate envejecido / Mediano 30 cm / 11,8 pulgadas
Latón mate envejecido / Mediano 30 cm / 11,8 pulgadas
Latón mate envejecido / Grande 40 cm / 15,7 pulgadas
Latón mate envejecido / Grande 40 cm / 15,7 pulgadas
Estilos disponibles Latón brillante, latón mate envejecido
Tamaños disponibles Pequeño 25 cm / 9,8 pulgadas, Mediano 30 cm / 11,8 pulgadas, Grande 40 cm / 15,7 pulgadas
Material Pantalla de metal en tono latón/cobre
Acabado Latón brillante o latón mate envejecido
Tipo de fuente de luz Fuente de luz LED
Bombilla incluida No
Nota sobre la bombilla Debe confirmarse el tipo de bombilla y los requisitos eléctricos locales antes de la instalación.
Tamaños del paquete Pequeño: 30 × 30 × 20 cm; Mediano: 35 × 35 × 20 cm; Grande: 40 × 40 × 23 cm
Espacios recomendados Comedor, cocina, estudio, cafetería, bar, tienda de café, tienda de ropa, interior tipo loft

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size
CLEARANCESIZE↔PROPORTION · PLACEMENT

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Starting fixture diameter

26 in / 66 cm

With a 9 ft ceiling, a 7 ft clear path leaves about 24 in for the complete drop.

Complete drop = canopy + suspension + fixture body. This is a planning allowance, not a product specification.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 inTABLETOP → LOWEST POINT
30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure
Measure the tabletop, including its width at the widest point.
Size & place
For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check
Center on the table and check the view across it while seated.
30–36 inEVEN CENTERS · CLEAR SHADE GAPSCHECK THE FULL ROW BEFORE DRILLING
30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure
Record counter length, width and the working area below.
Size & place
Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check
Mark equal centers; verify the actual gap between shades rather than using center spacing alone.
ROOM LENGTH12 ft + 14 ft → ABOUT 26 in WIDE
Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure
Record length, width and finished ceiling height.
Size & place
Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check
Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.
LAY OUT EQUAL BAYSEND OFFSET ≈ HALF THE CENTER SPACING
Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure
Mark the full walking route, doors and changes in ceiling height.
Size & place
Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check
Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.
MATCH THE USER’S FACE LEVELSCONCE CENTER ≈ 65–70 in ABOVE FLOOR
Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure
Record mirror dimensions, side wall space and cabinet swing.
Size & place
For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check
Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.
TEST FROM A SEATED POSITIONSHADE HIDES THE BULB · SWITCH WITHIN REACH
Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure
Measure the mattress, nightstand and your seated position.
Size & place
Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check
Check reach to the switch, head movement, pillows and any adjustable arm.
LIGHT FROM BESIDE OR BEHINDKEEP THE BULB OUT OF DIRECT VIEW
A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure
Sit in your usual chair with a book before locating the lamp.
Size & place
Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check
Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.