Pendant brass wall sconce installed beside a bed

Adjustable brass wall sconce above a wood nightstand

Brass wall sconce casting warm light in a bedroom

Close view of the brass shade and warm inner rim

Chain suspended brass wall sconce with round wall base

Round brass wall plate and arm connection detail

Pendant style brass wall sconce front SKU image

Straight arm brass wall sconce front SKU image

Angled adjustable arm brass wall sconce SKU image

Cargar imagen en el visor de la Galería, Pendant brass wall sconce installed beside a bed

Cargar imagen en el visor de la Galería, Adjustable brass wall sconce above a wood nightstand

Cargar imagen en el visor de la Galería, Brass wall sconce casting warm light in a bedroom

Cargar imagen en el visor de la Galería, Close view of the brass shade and warm inner rim

Cargar imagen en el visor de la Galería, Chain suspended brass wall sconce with round wall base

Cargar imagen en el visor de la Galería, Round brass wall plate and arm connection detail

Cargar imagen en el visor de la Galería, Pendant style brass wall sconce front SKU image

Cargar imagen en el visor de la Galería, Straight arm brass wall sconce front SKU image

Cargar imagen en el visor de la Galería, Angled adjustable arm brass wall sconce SKU image

Aplique de pared de latón cepillado

$229.00

Envío gratuito

Devoluciones en un plazo de 14 días

Pago seguro

Atención al cliente

Vista de detalles

Latón cepillado, estructura metálica estilizada y un perfil mural compacto.

La pantalla y la placa mural de latón aportan calidez visual, mientras que el perfil compacto funciona bien cerca de mesitas de noche, espejos, pasillos y pequeños rincones de lectura.

Pantalla de latón cálido: la pantalla cilíndrica mantiene la luz enfocada y muestra una superficie limpia de latón cepillado. — Pantalla de latón cálido

La pantalla cilíndrica mantiene la luz enfocada y muestra una superficie limpia de latón cepillado.

Suspensión colgante: la versión suspendida con cadena crea un acento vertical junto a la cama sin ocupar espacio en la mesita de noche. — Suspensión colgante

La versión suspendida con cadena crea un acento vertical junto a la cama sin ocupar espacio en la mesita de noche.

Placa mural compacta: una base de pared redonda mantiene la instalación limpia y visualmente sencilla. — Placa mural compacta

Una base de pared redonda mantiene la instalación limpia y visualmente sencilla.

1 2 3

Inspiración para estancias

Una elegante lámpara de pared para mesitas de noche, tocadores y rincones tranquilos.

Usa el estilo colgante junto a la cama o la versión con brazo ajustable donde resulte útil una luz de lectura direccional. El acabado de latón aporta calidez sin recargar la pared.

Escala para dormitorio

Sus proporciones compactas quedan perfectamente sobre las mesitas de noche y junto a cabeceros tapizados.

Ubicación focalizada

La opción ajustable es ideal para rincones de lectura, espejos de tocador y detalles decorativos en pasillos.

Estilo de brazo recto de latón cepillado

Brazo ajustable en ángulo de latón cepillado

Especificaciones del producto

Opciones de estilo y detalles de instalación en una vista compacta.

Elige entre estilos colgantes y de brazo ajustable, con el mismo acabado de latón y un rango eléctrico de 100-240 V.

MaterialCuerpo y pantalla de latón

AcabadoLatón cepillado / latón natural

Abertura de la pantalla colgante10,5 cm / 4,13 pulgadas

Altura de la pantalla colgante14,5 cm / 5,71 pulgadas

Diámetro de la base de pared10 cm / 3,94 pulgadas

Tipo de casquilloCasquillo de rosca E26/E27

Potencia máximaMáx. 40 W

Tipo de instalaciónInstalación mural con conexión directa

Bombillas incluidasNo

Voltaje100-240V

Este pedido no incluye bombillas.

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Aplique de pared de latón cepillado

Latón cepillado, estructura metálica estilizada y un perfil mural compacto.

Pantalla de latón cálido

Suspensión colgante

Placa mural compacta