Oferta de iluminación por el Día del Trabajo: disfruta de un 20 % de descuento
Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Cargar imagen en el visor de la Galería, Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Cargar imagen en el visor de la Galería, Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Cargar imagen en el visor de la Galería, Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Cargar imagen en el visor de la Galería, Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Cargar imagen en el visor de la Galería, Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Cargar imagen en el visor de la Galería, Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Cargar imagen en el visor de la Galería, Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor
Cargar imagen en el visor de la Galería, Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor

Lámpara colgante de cerámica Eloria - Pantalla de flor blanca con acabado en latón para cocina y comedor

$139.00

12% DE DESCUENTO

Compra 1

M12

15% DE DESCUENTO

Compra 2

M15

18% DE DESCUENTO

Compra 3 o más

M18

$60 DE DESCUENTO

Pedidos superiores a $330

M60

$100 DE DESCUENTO

Pedidos superiores a $500

M100
Solo quedan 9999 artículo(s) en stock
Pregunta

Pregunta

Información de envío

Información de envío

Política de devoluciones: Tienes 14 días después de recibir tu pedido para solicitar una devolución.

Disponibilidad: Realizamos envíos a Estados Unidos.

Tiempo de procesamiento: El tiempo de gestión del pedido es de 1 – 2 días hábiles (de lunes a viernes).

Envío gratuito
Devoluciones en un plazo de 14 días
Pago seguro
Atención al cliente

Diseño que destaca

La lámpara colgante de cerámica Eloria presenta una pantalla de cerámica blanca en forma de flor con un acabado en latón para un aspecto vintage de mediados de siglo. Proporciona una iluminación ambiental suave para comedores, cocinas y salas de estar, siendo una opción elegante sobre mesas de comedor, islas de cocina y áreas de descanso acogedoras.

Descubre los detalles

Experimenta el brillo

Dimensiones óptimas

    • Tamaño del colgante: ∅ 7.1″ × H 4.7″ / Diámetro 18 cm × H 12 cm
    • Longitud del cable: L 47″ / L 120 cm

    Especificaciones que impresionan

    • Material: Metal, Cerámica
    • Fuente de luz: E26
    • Potencia: 60W
    • Voltaje: 110-240V
    • Número de enchufes: 1

    Elaborado con carácter

    Favoritos de los clientes en Monulo

    Consejos de compra

    • Si tiene algún problema con los productos, por favor contáctenos y le responderemos en un plazo de 24 horas.
    • Por favor, tenga en cuenta y comprenda: debido a los diferentes monitores y métodos de medición, las diferencias de color y medida son inevitables.
    • Este pedido no incluye bombillas.

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Monulo · The practical guide

    Lighting that fits.
    A room that feels right.

    Find a starting size, see where to place it, and know what to check before installation.

    Find your starting size
    CLEARANCESIZE↔PROPORTION · PLACEMENT

    01 · Get the scale right

    A useful starting point, in seconds.

    For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

    Starting fixture diameter

    26 in / 66 cm

    With a 9 ft ceiling, a 7 ft clear path leaves about 24 in for the complete drop.

    Complete drop = canopy + suspension + fixture body. This is a planning allowance, not a product specification.

    Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

    02 · Look up

    Work with your ceiling.

    The available drop matters as much as the fixture diameter.

    Around 8 ft / 2.44 m

    Keep it close

    Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

    Around 9–10 ft / 2.74–3.05 m

    Balance the drop

    Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

    Above 10 ft / 3.05 m

    Scale with intention

    Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

    Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

    30–36 inTABLETOP → LOWEST POINT
    30–36 in / 76–91 cm above the tabletop

    Room study 01

    Dining table

    Let the furniture define the focal point.

    Measure
    Measure the tabletop, including its width at the widest point.
    Size & place
    For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
    Check
    Center on the table and check the view across it while seated.
    30–36 inEVEN CENTERS · CLEAR SHADE GAPSCHECK THE FULL ROW BEFORE DRILLING
    30–36 in / 76–91 cm above the counter

    Room study 02

    Kitchen island

    Plan the whole row before choosing the quantity.

    Measure
    Record counter length, width and the working area below.
    Size & place
    Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
    Check
    Mark equal centers; verify the actual gap between shades rather than using center spacing alone.
    ROOM LENGTH12 ft + 14 ft → ABOUT 26 in WIDE
    Start with at least 7 ft / 213 cm walking clearance

    Room study 03

    Room center

    Use the room formula as a visual starting point.

    Measure
    Record length, width and finished ceiling height.
    Size & place
    Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
    Check
    Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.
    LAY OUT EQUAL BAYSEND OFFSET ≈ HALF THE CENTER SPACING
    Keep doors, stairs and walking routes unobstructed

    Room study 04

    Hallway & entry

    A consistent rhythm works better than a crowded ceiling.

    Measure
    Mark the full walking route, doors and changes in ceiling height.
    Size & place
    Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
    Check
    Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.
    MATCH THE USER’S FACE LEVELSCONCE CENTER ≈ 65–70 in ABOVE FLOOR
    Position paired lights symmetrically beside the mirror

    Room study 05

    Bathroom vanity

    Put comfortable facial lighting first.

    Measure
    Record mirror dimensions, side wall space and cabinet swing.
    Size & place
    For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
    Check
    Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.
    TEST FROM A SEATED POSITIONSHADE HIDES THE BULB · SWITCH WITHIN REACH
    Use an adjustable mock-up before fixing wall lights

    Room study 06

    Bedroom & bedside

    Choose the height from where you actually sit.

    Measure
    Measure the mattress, nightstand and your seated position.
    Size & place
    Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
    Check
    Check reach to the switch, head movement, pillows and any adjustable arm.
    LIGHT FROM BESIDE OR BEHINDKEEP THE BULB OUT OF DIRECT VIEW
    A deeper or diffused shade can improve comfort

    Room study 07

    Reading & living

    Light the page without exposing the source.

    Measure
    Sit in your usual chair with a book before locating the lamp.
    Size & place
    Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
    Check
    Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

    03 · Before the tools come out

    One installation checklist.

    Bring the product instructions, room measurements and fixture weight to your installer.

    01 / Fit

    Mock up the final position

    Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

    02 / Support

    Verify the mounting

    Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

    03 / Compatibility

    Match the electrical details

    Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

    Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

    04 · The last few details

    Questions before you choose.

    Which measurement should I use for the drop?

    Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

    Does a larger light always mean a brighter room?

    No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

    How do I choose between two or three island pendants?

    Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

    What if my ceiling is too low for the light I like?

    Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

    Can any fixture go in a bathroom or on a sloped ceiling?

    No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

    What should I send when asking for sizing advice?

    Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.