Clinco Flower-Shaped Resin Plug-In Wall Lamp with Glass Diffuser for Bedroom Vanity and Reading Nook

Flower-shaped dark orange resin wall lamp switched off

Flower-shaped dark orange resin wall lamp switched on

FLOWER-SHAPED · RESIN WALL LAMP

Warm colour.
Made to draw the eye.

A sculpted resin flower brings a playful warm accent to bedrooms, vanities and reading corners. The rounded glass diffuser softens the centre, while the plug-in format keeps placement simple.

01
Sculpted resin petals. A tactile flower profile in dark orange.
02
Soft glass diffuser. A rounded centre creates a gentle focal point.
03
Easy plug-in placement. Use near a suitable regional outlet.

A CLOSER LOOK AT THE FLOWER LAMP

A detail worth noticing.

The layered resin shell, glass diffuser and dark metal fitting give this compact wall lamp its crafted character, even when the light is off.

1 / 3

Close detail of the dark metal fitting and resin shade connection

Defined connection

A clean dark metal fitting anchors the translucent shade and keeps the profile precise.

Close detail of the plug-in cord and inline switch

Plug-in cord detail

The integrated cord and inline switch keep the lamp simple to place beside a bed, vanity or reading chair.

Close detail of the layered amber resin and rounded glass diffuser

Layered colour and glass

Amber resin flows into the rounded diffuser, revealing depth through the translucent layers.

LIGHT FOR THE MOMENTS THAT MATTER

Made for real rooms.

Six considered views show how the lamp brings colour, softness and a warm focal point to everyday spaces.

1 / 2

Peach flower-shaped resin wall lamp beside a bed

Bedside calm

A soft bedside accent that keeps the nightstand clear.

Red resin wall lamp with cord beside a lounge chair

Lounge chair glow

A warm red accent for a reading chair or relaxed corner.

Green resin wall lamp above a vanity console

Vanity focus

A decorative layer beside a mirror or dressing table.

Orange resin wall lamp with cord above a dining sideboard

Dining room warmth

A rich amber note above a sideboard or dining area.

Orange resin wall lamp above a living room sideboard

Sideboard warmth

Bring a saturated accent to a console, artwork or shelf.

Green resin wall lamp with cord on an entryway console

Entryway welcome

A calm green accent that brightens the hall and keeps the console inviting.

DIMENSIONS & SPECIFICATIONS

Choose your size and colour.

Two sizes, with three colours in one size and four colours in the other.

Flower-shaped resin wall lamp line drawing, 21.5 cm

21.5 CM · GREEN

SIZE

COLOUR

PRODUCT DETAILS

21.5 cm · Green finish

Product type	Flower-shaped plug-in wall lamp
Overall size	21.5 cm / 8.5 in
Available colours	Green · Peach · Pink
Materials	Sculpted resin body · Rounded glass diffuser
Power source	Plug-in cord
Bulb / socket	Size A: E14 LED bulb, max 10 W · Size B: G9 LED bulb, max 3 W · Bulb not included
Placement	Indoor wall use · Bedroom · Vanity · Reading nook
Plug options	Regional plug compatible with your outlet

MAKE THE SPACE YOURS

Warmth in the right place.

Use the flower silhouette and soft peach finish to make a hallway or quiet corner feel personal.

Soft peach flower-shaped resin wall lamps arranged along a warm hallway

Highlight what matters

Frame a bedside, mirror or favourite corner.

Keep the wall light

Add character without taking over the room.

Pair your finishes

Soft peach resin works with warm wood, cream walls and layered lighting.

Enjoy every detail

The petals remain decorative whether lit or not.

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Idioma

Iniciar sesión

Restablecer su contraseña