Geometric Crystal Ceiling Light with three frame finishes and a cage frame

Geometric Crystal Ceiling Light with three frame finishes and a cage frame - New2609-1024522 interior scene

Geometric Crystal Ceiling Light with three frame finishes and a cage frame - New2609-1024521 interior scene

Geometric Crystal Ceiling Light with three frame finishes and a cage frame - New2609-1024520 interior scene

Geometric Crystal Ceiling Light with three frame finishes and a cage frame - New2609-1024519 interior scene

Cargar imagen en el visor de la Galería, Geometric Crystal Ceiling Light with three frame finishes and a cage frame

Cargar imagen en el visor de la Galería, Geometric Crystal Ceiling Light with three frame finishes and a cage frame - New2609-1024522 interior scene

Cargar imagen en el visor de la Galería, Geometric Crystal Ceiling Light with three frame finishes and a cage frame - New2609-1024521 interior scene

Cargar imagen en el visor de la Galería, Geometric Crystal Ceiling Light with three frame finishes and a cage frame - New2609-1024520 interior scene

Cargar imagen en el visor de la Galería, Geometric Crystal Ceiling Light with three frame finishes and a cage frame - New2609-1024519 interior scene

Lámpara de techo geométrica de cristal con tres acabados de marco y estructura tipo jaula.

$122.00

Color: Claro

Claro

Finalizar: Negro

Negro

Oro

Cromo

Tamaño: 7″ / 17,8 cm

7″ / 17,8 cm

10″ / 25,4 cm

Solo quedan 9999 artículo(s) en stock

Cantidad

Envío gratuito

Devoluciones en un plazo de 14 días

Pago seguro

Atención al cliente

Lámpara de techo geométrica con diseño de jaula de cristal

Cristal facetado, jaula escultural, un brillo refinado empotrado.

Paneles de cristal transparente se alojan dentro de la jaula metálica redondeada, creando reflejos nítidos sobre una consola de pasillo, una entrada u otra habitación íntima.

Paneles de cristal con estructura metálica geométrica. Montaje semiempotrado en techo.

DETALLES

Detalles que mantienen el formulario legible.

La delgada estructura de la jaula dibuja un contorno geométrico redondeado alrededor de los paneles de cristal transparente, lo que le da a la lámpara de techo una apariencia pulida y con varias capas.

Paneles de cristal facetados dentro de la jaula geométrica

01 / EL CRISTAL

Brilla desde todos los ángulos.

Los paneles de cristal transparente captan el brillo de la bombilla y lo dispersan con un destello nítido.

02 / LA JAULA

Una silueta gráfica redondeada.

Las líneas metálicas curvas aportan definición a la vez que mantienen una silueta visualmente ligera.

Dosel de techo en tono latón y lámpara de cristal

03 / EL DOSEL

Un acabado de techo impecable.

La base compacta completa la forma semiempotrada, creando una transición limpia donde la luminaria se une al techo.

Ilustración de instalación para la lámpara de techo de cristal con jaula geométrica.

CRISTAL Y JAULA

Detalles que dan cohesión al diseño

Corte la corriente eléctrica y asegure la base.
Con la luz encendida, la misma forma se percibe como un punto focal más suave en la habitación.
Instala la bombilla.
Enrosque una bombilla compatible en el portalámparas.
Asegure la sombra.
Coloca la pantalla sobre la bombilla y fija los soportes.
Inspeccione y luego encienda.
Antes de restablecer la energía y probar la luminaria, verifique que los cristales y la jaula estén bien sujetos.

EN ESPACIOS COTIDIANOS

Superficie, marco y conexión.

Lámpara de techo con estructura geométrica tipo jaula en una entrada cálida.

LA ENTRADA

Haz que la entrada brille.

Coloca la pantalla facetada cerca de la puerta para añadir brillo y crear una primera impresión acogedora.

Lámpara de techo con jaula de cristal en una sala de estar.

LA SALA DE ESTAR

Un centro de mesa decorativo suspendido.

Sobre una zona de asientos, la estructura redondeada aporta definición escultórica además de luz.

Lámpara de techo con jaula de cristal sobre un comedor.

EL COMEDOR

El brillo cristalino de la cena.

Su perfil semiempotrado conserva una sensación de amplitud, mientras que el cristal añade un cálido brillo vespertino.

TAMAÑO E INSTALACIÓN

Diseñado para techos pequeños.

Dimensiones de la lámpara de techo con jaula geométrica: siete pulgadas de diámetro y diecisiete coma ocho pulgadas de altura.

Dimensiones de la lámpara de techo con jaula geométrica: diez pulgadas de diámetro y quince coma siete pulgadas de altura.

1 / 2

DETALLES DEL PRODUCTO

Lámpara de techo semiempotrada tipo jaula geométrica

Cristal facetado transparente de tono

Estructura de jaula metálica geométrica redondeada

Fuente de luz: bombilla E26/E27

Tamaño 1 ∅ 7″ / Diámetro 17,8 cm; Altura 7″ / Altura 17,8 cm

Tamaño 2 ∅ 10″ / Diámetro 25,4 cm; Altura 8,5″ / Altura 21,6 cm

Instalación mediante cableado directo en techo semiempotrado

La bombilla no está incluida. Utilice una bombilla E26/E27 compatible. Los colores pueden variar ligeramente según la pantalla y la iluminación.

CUIDADO Y MANTENIMIENTO

Mantén el cristal limpio y luminoso.

Desconecte la alimentación antes de limpiar.

Apague la corriente y deje que la bombilla y la luminaria se enfríen por completo.

Limpiar suavemente con un paño suave.

Utilice un paño limpio y seco para limpiar los paneles de cristal y la jaula de metal.

Mantener alejado de la humedad.

No rocíe el limpiador sobre la cubierta, el enchufe ni las conexiones eléctricas.

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Idioma

Iniciar sesión

Restablecer su contraseña

Lámpara de techo geométrica de cristal con tres acabados de marco y estructura tipo jaula.

12% DE DESCUENTO

15% DE DESCUENTO

18% DE DESCUENTO

$60 DE DESCUENTO

$100 DE DESCUENTO

Pregunta

Información de envío