25 mm round flat hammered antique brass cabinet knob

Antique brass cabinet knob installed on a cream drawer

30 mm round flat hammered antique brass cabinet knob

Hammered antique brass knob on a wood cabinet door

25 mm round ball hammered antique brass cabinet knob

Small antique brass knob on a cabinet door

25 mm ball hammered antique brass cabinet knob with short stem

Pair of hammered antique brass knobs on a drawer front

25 mm ball hammered antique brass cabinet knob with base

Antique brass cabinet knobs on wardrobe doors

28 mm oval hammered antique brass cabinet knob

33 mm large rounded hammered antique brass cabinet knob

33 mm large oval hammered antique brass cabinet knob

Close view of hammered antique brass knob top texture

Side view of round flat antique brass cabinet knob

Close view of threaded mounting hole on antique brass knob

Cargar imagen en el visor de la Galería, 25 mm round flat hammered antique brass cabinet knob

Cargar imagen en el visor de la Galería, Antique brass cabinet knob installed on a cream drawer

Cargar imagen en el visor de la Galería, 30 mm round flat hammered antique brass cabinet knob

Cargar imagen en el visor de la Galería, Hammered antique brass knob on a wood cabinet door

Cargar imagen en el visor de la Galería, 25 mm round ball hammered antique brass cabinet knob

Cargar imagen en el visor de la Galería, Small antique brass knob on a cabinet door

Cargar imagen en el visor de la Galería, 25 mm ball hammered antique brass cabinet knob with short stem

Cargar imagen en el visor de la Galería, Pair of hammered antique brass knobs on a drawer front

Cargar imagen en el visor de la Galería, 25 mm ball hammered antique brass cabinet knob with base

Cargar imagen en el visor de la Galería, Antique brass cabinet knobs on wardrobe doors

Cargar imagen en el visor de la Galería, 28 mm oval hammered antique brass cabinet knob

Cargar imagen en el visor de la Galería, 33 mm large rounded hammered antique brass cabinet knob

Cargar imagen en el visor de la Galería, 33 mm large oval hammered antique brass cabinet knob

Cargar imagen en el visor de la Galería, Close view of hammered antique brass knob top texture

Cargar imagen en el visor de la Galería, Side view of round flat antique brass cabinet knob

Cargar imagen en el visor de la Galería, Close view of threaded mounting hole on antique brass knob

Tiradores vintage de latón antiguo martillado para cajones y puertas

$42.99

Tamaño: 25 mm / 0.98 in Redondo plano

25 mm / 0.98 in Redondo plano

30 mm / 1.18 in Redondo plano

Bola redonda de 25 mm / 0.98 in

Bola de 25 mm / 0.98 in con vástago corto

Bola de 25 mm / 0.98 in con base

Óvalo de 28 mm / 1.10 in

33 mm / 1.30 in Redondo grande

33 mm / 1.30 in Ovalado Grande

Solo quedan 9999 artículo(s) en stock

Cantidad

Envío gratuito

Devoluciones en un plazo de 14 días

Pago seguro

Atención al cliente

EXHIBICIÓN DE DETALLES

Textura martillada, acabado de latón antiguo y una sensación de metal macizo.

Estos pomos para armarios aportan un compacto acento metálico a cajones, puertas de armarios roperos, frentes de armarios y pequeñas renovaciones de muebles.

Superficie martillada

La parte superior facetada capta la luz desde distintos ángulos y da a cada pomo un carácter antiguo artesanal.

Acabado de latón antiguo

El cálido tono de latón envejecido combina con madera, pintura crema, muebles vintage e interiores modernos y sobrios.

Orificio de montaje roscado

Un casquillo roscado centrado permite una instalación sencilla en puertas de armarios y frentes de cajones.

HISTORIA DE INSPIRACIÓN

Un pequeño cambio en los herrajes para dar a sus muebles un aspecto más cálido.

Use los pomos para renovar una cómoda, una mesita de noche, un armario ropero, un tocador o un mueble de almacenamiento de cocina sin cambiar el mueble en sí.

ESPECIFICACIONES DEL PRODUCTO

Ocho tamaños de pomos para cajones, armarios y puertas de armarios roperos.

Elija el tamaño que mejor se adapte a la escala de sus muebles y, a continuación, consulte los detalles del material, el acabado, la instalación y el cuidado.

Redondo plano de 25 mm / 0,98 in

Aprox. 25-26 mm / 2,5-2,6 cm / 0,98-1,02 in de diámetro superior, 19 mm / 1,9 cm / 0,75 in de alto y vástago de 10 mm / 1,0 cm / 0,39 in.

Redondo plano de 30 mm / 1,18 in

Aprox. 30-31 mm / 3,0-3,1 cm / 1,18-1,22 in de diámetro superior, 19 mm / 1,9 cm / 0,75 in de alto y vástago de 10 mm / 1,0 cm / 0,39 in.

Bola redonda de 25 mm / 0,98 in

Aprox. 24-25 mm / 2,4-2,5 cm / 0,94-0,98 in de diámetro de bola y 23 mm / 2,3 cm / 0,91 in de altura total.

Bola de 25 mm / 0,98 in con vástago corto

Aprox. 24-25 mm / 2,4-2,5 cm / 0,94-0,98 in de diámetro de bola, 32 mm / 3,2 cm / 1,26 in de alto y vástago de 10 mm / 1,0 cm / 0,39 in.

Bola de 25 mm / 0,98 in con base

Aprox. 24-25 mm / 2,4-2,5 cm / 0,94-0,98 in de diámetro de bola, 32 mm / 3,2 cm / 1,26 in de alto y base de 16 mm / 1,6 cm / 0,63 in.

Óvalo de 28 mm / 1,10 in

Aprox. 27-28 mm / 2,7-2,8 cm / 1,06-1,10 in de ancho, 26 mm / 2,6 cm / 1,02 in de alto y base de 16 mm / 1,6 cm / 0,63 in.

Redondo grande de 33 mm / 1,30 in

Aprox. 33 mm / 3,3 cm / 1,30 in de diámetro superior, 31 mm / 3,1 cm / 1,22 in de alto y base de 18 mm / 1,8 cm / 0,71 in.

Óvalo grande de 33 mm / 1,30 in

Aprox. 33 mm / 3,3 cm / 1,30 in de ancho, 36 mm / 3,6 cm / 1,42 in de alto y base de 16 mm / 1,6 cm / 0,63 in.

Acabado	Latón antiguo
Material	Latón macizo
Uso	Puertas de armarios, cajones, armarios roperos, cómodas, alacenas y puertas de muebles
Instalación	Pomo de montaje en superficie; puede ser necesario perforar
Tipo de montaje	Pomo de un solo orificio
Paquete	Se vende por unidad
Cuidado	Limpie con un paño suave y seco. Evite los limpiadores abrasivos y la humedad prolongada.

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Tiradores vintage de latón antiguo martillado para cajones y puertas