North American walnut carved wooden pendant light shade

Cherry wood carved wooden pendant light shade

Black lacquer carved wooden pendant light shade

Wood pendant light above a small living room table beside a window

Warm wood pendant light in a living room seating area

Hand carved wood pendant light casting warm light on a quiet wall

Single pendant light beside a reading chair and framed art

Cargar imagen en el visor de la Galería, North American walnut carved wooden pendant light shade

Cargar imagen en el visor de la Galería, Cherry wood carved wooden pendant light shade

Cargar imagen en el visor de la Galería, Black lacquer carved wooden pendant light shade

Cargar imagen en el visor de la Galería, Wood pendant light above a small living room table beside a window

Cargar imagen en el visor de la Galería, Warm wood pendant light in a living room seating area

Cargar imagen en el visor de la Galería, Hand carved wood pendant light casting warm light on a quiet wall

Cargar imagen en el visor de la Galería, Single pendant light beside a reading chair and framed art

Lámpara colgante de madera maciza tallada

$299.00

Finalizar: Nogal

Nogal

Madera de cerezo

Negro

Tamaño: 8.3" / 21 cm

8.3" / 21 cm

8.7" / 22 cm

9.8" / 25 cm

10.6" / 27 cm

11" / 28 cm

Solo quedan 9999 artículo(s) en stock

Cantidad

Envío gratuito

Devoluciones en un plazo de 14 días

Pago seguro

Atención al cliente

Pantalla de madera tallada a mano

Una lámpara colgante de madera delgada que calienta un rincón tranquilo.

Cada pantalla mantiene el perfil redondo y bajo de una luz de taller vintage, luego lo suaviza con la veta tallada de la madera, un soporte tono latón y una bombilla LED cálida E27.

Detalle cercano de la textura tallada de madera de cerezo y soporte de lámpara de latón

Vista en mano de la delgada pantalla redonda de madera tallada

Kit de lámpara colgante con pantalla de madera, copa de latón, cable y tornillos

Madera maciza delgada, tallada a mano

La pantalla poco profunda de 2,3 cm mantiene la silueta ligera mientras que la superficie tallada capta la luz cálida a través de la veta de la madera. El conjunto incluye la pantalla, soporte tono latón, cable, copa, bombilla y tornillos de fijación.

Comedor, junto a la cama, entrada, rincón de lectura

Escalado para habitaciones pequeñas e iluminación en capas.

Use una lámpara colgante sobre una mesa compacta, una esquina junto a la cama o una silla de lectura, o repita varias sobre un mostrador. El rango cálido de 2400-4000K es adecuado para una luz relajada por la noche en lugar de una iluminación dura para tareas.

Lámpara colgante de madera sobre una pequeña mesa de sala junto a una ventana

Acabados y tamaños

Elija el tono de madera y el diámetro que se adapten al espacio.

No todos los acabados están disponibles en todos los diámetros. Por favor, seleccione entre las variantes disponibles en la página del producto.

Pantalla colgante de madera tallada de nogal norteamericano — Nogal norteamericano

Pantalla colgante de madera tallada de madera de cerezo — Madera de cerezo

Pantalla colgante de madera tallada con laca negra — Laca negra

Diámetro de la pantalla	8,3″, 8,7″, 9,8″, 10,6″ o 11″ / 21 cm, 22 cm, 25 cm, 27 cm o 28 cm
Altura de la pantalla	0,9″ / 2,3 cm
Materiales	Pantalla de madera, soporte de cobre tono latón, copa de techo de ABS + metal
Bombilla	E27
Longitud del cable	70,9″ / 1,8 m, extensible
Área sugerida	Aproximadamente 5 m² / 54 pies² de iluminación de acento
El paquete incluye	Pantalla de madera, soporte de tono latón, cable, bombilla LED, copa de techo, tornillos de fijación

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Lámpara colgante de madera maciza tallada