Manijas y perillas para gabinetes de madera maciza

01 Detalles

Los mangos de madera redondeados crean un perfil simple para

Los tiradores de madera redondeados crean un perfil sencillo para puertas de armarios y cajones. Las opciones disponibles incluyen diferentes maderas, formas de mango y distancias entre los orificios de fijación.

Manijas y perillas para gabinetes de madera maciza, Vista cerrada — Vista cerrada

Manijas y perillas para gabinetes de madera maciza, Perfil — Perfil

Manijas y perillas para gabinetes de madera maciza, Otro ángulo — Otro ángulo

1 / 3 Vista de cerca

2 / 3 Perfil

3 / 3 Otro ángulo

Tiradores y pomos de armario de madera maciza en uso

02 En casa

Una de las opciones enumeradas se muestra aquí.

Aquí se muestra una de las opciones enumeradas. Las demás opciones están en las opciones.

03 Especificaciones

Las opciones que se muestran aquí son las que se pueden pedir.

Las opciones mostradas aquí son las que se pueden pedir.

Producto	Manijas y perillas para gabinetes de madera maciza
Acabado	Haya; Roble; Nogal; Nogal Negro
Estilo	barra en T redondeada; Tirador de mariposa largo; Cono; Embudo; Champiñón; redondo plano; Pelota; barra en T; y 3 más en las opciones
Tamaño	7 cm / 2.8 in, 32 mm / 1.3 in Distancia entre Agujeros; 10 cm / 3.9 in, 64 mm / 2.5 in Distancia entre Agujeros; 13 cm / 5.1 in, 96 mm / 3.8 in Distancia entre Agujeros; 16 cm / 6.3 in, 128 mm / 5 in Distancia entre Agujeros; 19 cm / 7.5 in, 160 mm / 6.3 in Distancia entre Agujeros; 23 cm / 9.1 in, 192 mm / 7.6 in Distancia entre Agujeros; 7 cm / 2.8 in; 10 cm / 3.9 in;…

Haya, Barra en T redondeada, 7 cm, 32 mm Espaciado de orificios

Haya, Barra en T redondeada, 10 cm, 64 mm Espaciado de orificios

Haya, Barra en T redondeada, 13 cm, 96 mm Espaciado de orificios

Haya, Barra en T redondeada, 16 cm, 128 mm Espaciado de orificios

Haya, Barra en T redondeada, 19 cm, 160 mm Espaciado de orificios

Haya, Barra en T redondeada, 23 cm, 192 mm Espaciado de orificios

Roble, Barra en T redondeada, 7 cm, 32 mm Espaciado de orificios

Roble, Barra en T redondeada, 10 cm, 64 mm Espaciado de orificios

Roble, Barra en T redondeada, 13 cm, 96 mm Espaciado de orificios

Roble, Barra en T redondeada, 16 cm, 128 mm Espaciado de orificios

Roble, Barra en T redondeada, 19 cm, 160 mm Espaciado de orificios

Roble, Barra en T redondeada, 23 cm, 192 mm Espaciado de orificios

Nogal, Barra en T redondeada, 7 cm, 32 mm Espaciado de orificios

Nogal, Barra en T redondeada, 10 cm, 64 mm Espaciado de orificios

Nogal, Barra en T redondeada, 13 cm, 96 mm Espaciado de orificios

Nogal, Barra en T redondeada, 16 cm, 128 mm Espaciado de orificios

Nogal, Barra en T redondeada, 19 cm, 160 mm Espaciado de orificios

Nogal, Barra en T redondeada, 23 cm, 192 mm Espaciado de orificios

1 / 55Haya, tirador en T redondeado, 7 cm, distancia entre taladros de 32 mm

2 / 55Haya, tirador en T redondeado, 10 cm, distancia entre taladros de 64 mm

3 / 55Haya, tirador en T redondeado, 13 cm, distancia entre taladros de 96 mm

4 / 55Haya, tirador en T redondeado, 16 cm, distancia entre taladros de 128 mm

5 / 55Haya, tirador en T redondeado, 19 cm, distancia entre taladros de 160 mm

6 / 55Haya, tirador en T redondeado, 23 cm, distancia entre taladros de 192 mm

7 / 55Roble, barra en T redondeada, 7 cm, distancia entre taladros 32 mm

8 / 55Roble, Barra en T Redondeada, 10 cm, Distancia entre Taladros 64 mm

9 / 55Roble, barra en T redondeada, 13 cm, distancia entre taladros 96 mm

10 / 55Roble, barra en T redondeada, 16 cm, distancia entre taladros 128 mm

11 / 55Roble, barra en T redondeada, 19 cm, distancia entre taladros 160 mm

12 / 55Roble, barra en T redondeada, 23 cm, distancia entre taladros 192 mm

13 / 55Nogal, barra en T redondeada, 7 cm, distancia entre perforaciones 32 mm

14 / 55Nogal, barra en T redondeada, 10 cm, distancia entre perforaciones 64 mm

15 / 55Nogal, barra en T redondeada, 13 cm, distancia entre perforaciones 96 mm

16 / 55Nogal, barra en T redondeada, 16 cm, distancia entre perforaciones 128 mm

17 / 55Nogal, barra en T redondeada, 19 cm, distancia entre perforaciones 160 mm

18 / 55Nogal, barra en T redondeada, 23 cm, distancia entre perforaciones 192 mm

19 / 55Haya, tirador largo de mariposa, 7 cm

20 / 55Haya, tirador largo de mariposa, 10 cm

21 / 55Haya, tirador largo de mariposa, 13 cm

22 / 55Haya, tirador largo de mariposa, 16 cm

23 / 55Haya, tirador largo de mariposa, 23 cm

24 / 55Nogal, tirador mariposa largo, 7 cm

25 / 55Nogal, tirador mariposa largo, 10 cm

26 / 55Nogal, tirador mariposa largo, 13 cm

27 / 55Nogal, tirador mariposa largo, 16 cm

28 / 55Nogal, tirador mariposa largo, 19 cm

29 / 55Nogal, tirador mariposa largo, 23 cm

30 / 55 Haya, Cone, 4 cm

31 / 55 Nogal, Cone, 4 cm

32 / 55 Haya, Funnel, 2.2 cm

33 / 55 Nogal, Funnel, 2.2 cm

34 / 55 Haya, Seta, 3.8 cm

35 / 55 Haya, Seta, 6 cm

36 / 55 Nogal negro, Seta, 3.8 cm

37 / 55 Nogal, Seta, 6 cm

38 / 55 Haya, redondo plano, 4 cm

39 / 55 Haya, Plano Redondo, 6 cm

40 / 55 Nogal, redondo plano, 4 cm

41 / 55 Nogal, redondo plano, 6 cm

42 / 55 Haya, Bola, 3 cm

43 / 55 Haya, Bola, 4 cm

44 / 55 Nogal, Bola, 3 cm

45 / 55 Nogal, Bola, 4 cm

46 / 55 Haya, T-Bar, 3.5 cm

47 / 55 Haya, T-Bar, 4 cm

48 / 55 Nogal, T-Bar, 3.5 cm

49 / 55 Nogal, T-Bar, 4 cm

50 / 55 Haya, Octagon, 4 cm

51 / 55 Haya, Cuadrado, 4 cm

52 / 55 Haya, Hexagon, 4 cm

53 / 55 Nogal, Octagon, 4 cm

54 / 55 Nogal, Cuadrado, 4 cm

55 / 55 Nogal, Hexagon, 4 cm

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Manijas y perillas para gabinetes de madera maciza

Los mangos de madera redondeados crean un perfil simple para

Una de las opciones enumeradas se muestra aquí.

Las opciones que se muestran aquí son las que se pueden pedir.

Customer Reviews

Lighting that fits.
A room that feels right.

A useful starting point, in seconds.

Work with your ceiling.

Keep it close

Balance the drop

Scale with intention

Dining table

Kitchen island

Room center

Hallway & entry

Bathroom vanity

Bedroom & bedside

Reading & living

One installation checklist.

Mock up the final position

Verify the mounting

Match the electrical details

Questions before you choose.

A little measuring. A better fit.

También te puede gustar

Información

Aviso de política

Boletín informativo

Idioma

Iniciar sesión

Restablecer su contraseña

Manijas y perillas para gabinetes de madera maciza

12% DE DESCUENTO

15% DE DESCUENTO

18% DE DESCUENTO

$60 DE DESCUENTO

$100 DE DESCUENTO

Pregunta

Información de envío

Los mangos de madera redondeados crean un perfil simple para

Una de las opciones enumeradas se muestra aquí.

Las opciones que se muestran aquí son las que se pueden pedir.

Customer Reviews

Lighting that fits.A room that feels right.

A useful starting point, in seconds.

Work with your ceiling.

Keep it close

Balance the drop

Scale with intention

Dining table

Kitchen island

Room center

Hallway & entry

Bathroom vanity

Bedroom & bedside

Reading & living

One installation checklist.

Mock up the final position

Verify the mounting

Match the electrical details

Questions before you choose.

A little measuring. A better fit.

También te puede gustar

Lighting that fits.
A room that feels right.