Striped fabric floor lamp with tapered wood grain base on white background

Striped fabric floor lamp styled beside a sideboard in a warm living room

Tall striped shade floor lamp beside a console table

Striped fabric floor lamp lighting a sofa lounge area

Striped floor lamp in a cozy reading corner with chair and art wall

Close detail of the smooth wood grain tapered lamp base

Close detail of the textured striped fabric lampshade

Cargar imagen en el visor de la Galería, Striped fabric floor lamp with tapered wood grain base on white background

Cargar imagen en el visor de la Galería, Striped fabric floor lamp styled beside a sideboard in a warm living room

Cargar imagen en el visor de la Galería, Tall striped shade floor lamp beside a console table

Cargar imagen en el visor de la Galería, Striped fabric floor lamp lighting a sofa lounge area

Cargar imagen en el visor de la Galería, Striped floor lamp in a cozy reading corner with chair and art wall

Cargar imagen en el visor de la Galería, Close detail of the smooth wood grain tapered lamp base

Cargar imagen en el visor de la Galería, Close detail of the textured striped fabric lampshade

Lámpara de pie de tela a rayas

$849.00

Envío gratuito

Devoluciones en un plazo de 14 días

Pago seguro

Atención al cliente

Lámpara de pie con pantalla de tela a rayas y base cálida con vetas de madera

Una lámpara de pie escultórica para salas de estar, dormitorios, estudios y espacios boutique con capas, equilibrando una pantalla a rayas texturizada con una base cónica similar a un mueble.

Detalle cercano de la pantalla de tela a rayas con textura

Detalle cercano de la base cónica de la lámpara con vetas de madera lisas

Detalle del material

Textura que puedes ver de cerca

La pantalla de tela aporta un ritmo diagonal audaz, mientras que la base lisa con vetas de madera mantiene la silueta equilibrada y cálida.

Pantalla de tela con textura de aspecto artesanal
Base cónica con acabado claro de vetas de madera
Casquillo E27 para fácil combinación de bombillas

Estilismo de la habitación

Un punto focal suave junto al sofá

Colocada cerca de un sofá, consola o sillón de lectura, la pantalla cilíndrica alta añade patrón sin saturar la habitación. La base cálida combina naturalmente con tapicería neutra, muebles de nogal, alfombras tejidas e interiores inspirados en Maillard.

Lámpara de pie con pantalla de tela a rayas iluminando un área de sofá

Lámpara de pie con pantalla de tela a rayas y base cónica con vetas de madera sobre fondo blanco

Pantalla a rayas, diámetro de 30 cm

Estilo visual único confirmado.

EstiloLámpara de pie residencial / de inspiración vintage

Diámetro de la pantalla11.8″ / 30 cm

Altura total64.2″ / 163 cm

Fuente de luzCasquillo E27

MaterialPantalla de tela + estructura de hierro

Voltaje111V-240V

Usar espaciosSala de estar, dormitorio, estudio, decoración comercial

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Lámpara de pie de tela a rayas