Milky white glass flush mount ceiling light

Embossed glass ceiling light in an entryway scene

Embossed glass flush mount ceiling light in a bright hallway

Textured glass ceiling light in a corridor scene

Warm glass flush mount ceiling light in an entryway

Textured sand glass flush mount ceiling light

Warm beige glass flush mount ceiling light

Warm close-up of embossed glass ceiling light pattern

Textured glass relief close-up on flush mount ceiling light

Milky glass floral relief detail on ceiling light

Cargar imagen en el visor de la Galería, Milky white glass flush mount ceiling light

Cargar imagen en el visor de la Galería, Embossed glass ceiling light in an entryway scene

Cargar imagen en el visor de la Galería, Embossed glass flush mount ceiling light in a bright hallway

Cargar imagen en el visor de la Galería, Textured glass ceiling light in a corridor scene

Cargar imagen en el visor de la Galería, Warm glass flush mount ceiling light in an entryway

Cargar imagen en el visor de la Galería, Textured sand glass flush mount ceiling light

Cargar imagen en el visor de la Galería, Warm beige glass flush mount ceiling light

Cargar imagen en el visor de la Galería, Warm close-up of embossed glass ceiling light pattern

Cargar imagen en el visor de la Galería, Textured glass relief close-up on flush mount ceiling light

Cargar imagen en el visor de la Galería, Milky glass floral relief detail on ceiling light

Lámpara de techo vintage de vidrio con relieve y montaje empotrado

$149.00

Acabado de pantalla: Vidrio blanco lechoso

Vidrio blanco lechoso

Vidrio de arena texturizado

Cristal Beige Cálido

Tamaño: Diámetro 20 cm / Diámetro 7.9 in

Diámetro 20 cm / Diámetro 7.9 in

Solo quedan 9999 artículo(s) en stock

Cantidad

Envío gratuito

Devoluciones en un plazo de 14 días

Pago seguro

Atención al cliente

Vista de detalles

Textura de vidrio repujado con un perfil de techo vintage compacto.

El relieve de vidrio elevado, la difusión suave y el cuerpo bajo de montaje al ras convierten las pequeñas superficies del techo en un foco decorativo sin una silueta voluminosa.

Primer plano cálido del patrón de vidrio repujado de la lámpara de techo

Relieve geométrico elevado

Los motivos de diamantes y pétalos en relieve aportan profundidad a toda la pantalla de vidrio redondeada.

Primer plano del relieve de vidrio texturizado en la lámpara de techo de montaje al ras

Acabado de vidrio texturizado

La superficie estampada capta la luz suavemente, al tiempo que mantiene la lámpara compacta y refinada.

Detalle del relieve floral de vidrio lechoso en la lámpara de techo

Brillo suave y difuso

El vidrio lechoso ayuda a difundir la luz LED integrada para usarla en pasillos, balcones, entradas y vestidores.

Historia de inspiración

Un discreto detalle de techo para pasillos, balcones y pequeños espacios de transición.

Inspirada en las lámparas de vidrio vintage y la geometría suave de la era Bauhaus, esta lámpara de techo aporta un aspecto cuidadosamente seleccionado a los interiores compactos. Úsala donde una lámpara de techo plana deba sentirse decorativa y no meramente funcional.

Lámpara de techo de vidrio repujado de montaje al ras en un pasillo luminoso

Información de especificaciones

Acabados y detalles del producto

Los tres acabados de pantalla de vidrio comparten el mismo tamaño compacto y el formato con LED integrado.

Tipo de producto	Lámpara de techo de montaje al ras
Material	Pantalla de vidrio, estructura de hierro
Tamaño	Diámetro 20 cm × altura 17 cm / Diámetro 7,9 in × altura 6,7 in
Voltaje	110 V-240 V
Potencia	6 W-10 W
Fuente de luz	LED integrado, cambio de 3 colores
Área adecuada	5-10 m²
Control inteligente	No
Espacios recomendados	Pasillo, balcón, entrada, vestidor, corredor

Lámpara de techo de vidrio blanco lechoso de montaje al ras

Vidrio blanco lechosoDiámetro 20 cm / Diámetro 7,9 in

Lámpara de techo de vidrio texturizado color arena de montaje al ras

Vidrio texturizado color arenaDiámetro 20 cm / Diámetro 7,9 in

Lámpara de techo de vidrio beige cálido de montaje al ras

Vidrio beige cálidoDiámetro 20 cm / Diámetro 7,9 in

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Lámpara de techo vintage de vidrio con relieve y montaje empotrado