Oferta de iluminación por el Día del Trabajo: disfruta de un 20 % de descuento
USD

Idioma

Español

Monulo
Carro 0 artículo $0.00
Carro 0 artículo $0.00
Hogar
Comercio
Lista de deseos
Hogar
Categorías de iluminación
Serie destacada
Los más vendidos
Explorar más
Acentos para el hogar
Despacho rápido
  1. Hogar
  2. 260715-260722 ALL TB Choice
  3. Lámpara de pie vintage de tela plisada con soporte escultural en tono madera
Full view of vintage floor lamp with brown vertical striped fabric shade
Full view of vintage floor lamp with blue and orange fine check fabric shade
Brown striped floor lamp glowing between a sofa and wooden chest
Blue orange check floor lamp glowing beside a leather reading chair
Close-up of blue orange check pleated shade with scalloped edge and pom-pom trim
Close-up of sculpted wood-tone finish on the vintage floor lamp pole
Close-up of round weighted base with layered wood-tone finish
Cargar imagen en el visor de la Galería, Full view of vintage floor lamp with brown vertical striped fabric shade
Cargar imagen en el visor de la Galería, Full view of vintage floor lamp with blue and orange fine check fabric shade
Cargar imagen en el visor de la Galería, Brown striped floor lamp glowing between a sofa and wooden chest
Cargar imagen en el visor de la Galería, Blue orange check floor lamp glowing beside a leather reading chair
Cargar imagen en el visor de la Galería, Close-up of blue orange check pleated shade with scalloped edge and pom-pom trim
Cargar imagen en el visor de la Galería, Close-up of sculpted wood-tone finish on the vintage floor lamp pole
Cargar imagen en el visor de la Galería, Close-up of round weighted base with layered wood-tone finish

Lámpara de pie vintage de tela plisada con soporte escultural en tono madera

$399.00

12% DE DESCUENTO

Compra 1

M12

15% DE DESCUENTO

Compra 2

M15

18% DE DESCUENTO

Compra 3 o más

M18

$60 DE DESCUENTO

Pedidos superiores a $330

M60

$100 DE DESCUENTO

Pedidos superiores a $500

M100
Solo quedan 9999 artículo(s) en stock
Pregunta

Pregunta

Información de envío

Información de envío

Política de devoluciones: Tienes 14 días después de recibir tu pedido para solicitar una devolución.

Disponibilidad: Realizamos envíos a Estados Unidos.

Tiempo de procesamiento: El tiempo de gestión del pedido es de 1 – 2 días hábiles (de lunes a viernes).

Compartir
Envío gratuito
Devoluciones en un plazo de 14 días
Pago seguro
Atención al cliente
  • Descripción
  • Revisar
  • Lighting Size Guide
Descripción

Detalles artesanales

Tela plisada, ritmo esculpido y una base sólida

La pantalla de tela con forma definida combina pliegues profundos, un borde festoneado y un suave ribete de pompones. Debajo, el acabado esculpido en tono madera crea un ritmo vintage continuo a lo largo de la estructura de hierro, que termina en una amplia base redonda.

Primer plano de la pantalla plisada de cuadros azules y naranjas, con borde festoneado y ribete de pompones
Primer plano del acabado esculpido en tono madera del pie de la lámpara vintage
Primer plano de la base redonda lastrada con acabado en capas de tono madera
Lámpara de pie de cuadros azules y naranjas iluminada junto a un sillón de lectura de cuero

Inspiración para estancias

Un alto toque vintage para rincones de lectura y estancias tranquilas

Con aproximadamente 152 cm de altura, la lámpara aporta altura y carácter junto a un sillón, sofá o cómoda sin ocupar mucho espacio. La pantalla estampada añade un toque textil elegante, mientras que la estructura esculpida ancla la estancia con un acabado cálido y de aspecto cuidadosamente elegido.

Vista completa de una lámpara de pie vintage con pantalla de tela de rayas verticales marrones
Vista completa de una lámpara de pie vintage con pantalla de tela de cuadros finos azules y naranjas

Rayas verticales marrones

Estilos y especificaciones

Proporciones medidas y dos estampados de pantalla

Tipo
Lámpara de pie
Material de la pantalla
Tela
Material de la estructura
Hierro con acabado en tono madera
Altura total
Alto 152 cm / 59.84 in
Diámetro de la pantalla
Ø 30 cm / 11.81 in
Diámetro de la base
Ø 24.5 cm / 9.65 in
Longitud del cable de alimentación
280 cm / 110.24 in
Distancia del enchufe al interruptor
140 cm / 55.12 in
Portalámparas
E27
Voltaje
100-240V
Interruptor
Interruptor de pie
Control inteligente
No
Bombilla incluida
No
Revisar

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Lighting Size Guide

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size
CLEARANCESIZE↔PROPORTION · PLACEMENT

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Starting fixture diameter

26 in / 66 cm

With a 9 ft ceiling, a 7 ft clear path leaves about 24 in for the complete drop.

Complete drop = canopy + suspension + fixture body. This is a planning allowance, not a product specification.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 inTABLETOP → LOWEST POINT
30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure
Measure the tabletop, including its width at the widest point.
Size & place
For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check
Center on the table and check the view across it while seated.
30–36 inEVEN CENTERS · CLEAR SHADE GAPSCHECK THE FULL ROW BEFORE DRILLING
30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure
Record counter length, width and the working area below.
Size & place
Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check
Mark equal centers; verify the actual gap between shades rather than using center spacing alone.
ROOM LENGTH12 ft + 14 ft → ABOUT 26 in WIDE
Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure
Record length, width and finished ceiling height.
Size & place
Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check
Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.
LAY OUT EQUAL BAYSEND OFFSET ≈ HALF THE CENTER SPACING
Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure
Mark the full walking route, doors and changes in ceiling height.
Size & place
Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check
Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.
MATCH THE USER’S FACE LEVELSCONCE CENTER ≈ 65–70 in ABOVE FLOOR
Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure
Record mirror dimensions, side wall space and cabinet swing.
Size & place
For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check
Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.
TEST FROM A SEATED POSITIONSHADE HIDES THE BULB · SWITCH WITHIN REACH
Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure
Measure the mattress, nightstand and your seated position.
Size & place
Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check
Check reach to the switch, head movement, pillows and any adjustable arm.
LIGHT FROM BESIDE OR BEHINDKEEP THE BULB OUT OF DIRECT VIEW
A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure
Sit in your usual chair with a book before locating the lamp.
Size & place
Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check
Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Make it your own

A little measuring. A better fit.

Keep your dimensions close while you compare your shortlist.

Ask Monulo

También te puede gustar

Diseños que te encantan,
Calidad en la que puede confiar.
En Monulo, creemos que la iluminación debe hacer más que iluminar una habitación: debe hacerte sentir como en casa. Nuestros diseños combinan un estilo atemporal con una calidad confiable, para que puedas disfrutar de piezas que realmente amas y en las que confías para que duren.