Oferta de iluminación por el Día del Trabajo: disfruta de un 20 % de descuento
Lámpara colgante vintage de vidrio lechoso jade cálido
Milky white glass pendant light above a seating area
Vintage glass pendant light with warm ambience
Vintage milk glass pendant light in a warm living room
Glass shade and stitched band detail
Milky glass texture and brass underside detail
Stitched leather-look band close-up
Cargar imagen en el visor de la Galería, Lámpara colgante vintage de vidrio lechoso jade cálido
Cargar imagen en el visor de la Galería, Milky white glass pendant light above a seating area
Cargar imagen en el visor de la Galería, Vintage glass pendant light with warm ambience
Cargar imagen en el visor de la Galería, Vintage milk glass pendant light in a warm living room
Cargar imagen en el visor de la Galería, Glass shade and stitched band detail
Cargar imagen en el visor de la Galería, Milky glass texture and brass underside detail
Cargar imagen en el visor de la Galería, Stitched leather-look band close-up

Lámpara colgante vintage de vidrio lechoso jade cálido

$289.00

12% DE DESCUENTO

Compra 1

M12

15% DE DESCUENTO

Compra 2

M15

18% DE DESCUENTO

Compra 3 o más

M18

$60 DE DESCUENTO

Pedidos superiores a $330

M60

$100 DE DESCUENTO

Pedidos superiores a $500

M100
Solo quedan 9999 artículo(s) en stock
Pregunta

Pregunta

Información de envío

Información de envío

Política de devoluciones: Tienes 14 días después de recibir tu pedido para solicitar una devolución.

Disponibilidad: Realizamos envíos a Estados Unidos.

Tiempo de procesamiento: El tiempo de gestión del pedido es de 1 – 2 días hábiles (de lunes a viernes).

Envío gratuito
Devoluciones en un plazo de 14 días
Pago seguro
Atención al cliente

Lámpara colgante de vidrio jade cálido

Un colgante que brilla suavemente con carácter vintage.

Vidrio lechoso en capas, una banda cosida de tono cálido y detalles en latón aportan un ambiente tranquilo y elegante a comedores, dormitorios y espacios íntimos.

Detalle de pantalla de vidrio y banda cosida
Banda cosida de tono cálido
Textura de vidrio lechoso y detalle inferior en latón
Textura de vidrio lechoso
Primer plano de banda cosida con aspecto de cuero
Borde acabado limpio

Hecho para noches tranquilas

Vidrio que hace que las habitaciones cotidianas sean más cálidas.

La pantalla compacta de 32 cm se coloca fácilmente sobre una esquina junto a la cama, una mesa de comedor pequeña o un área de descanso relajada, añadiendo un suave foco de luz sin saturar la habitación.

Lámpara colgante de vidrio vintage con ambiente cálido.
Lámpara colgante de vidrio blanco lechoso sobre un área de descanso.

Acabado seleccionado

Vidrio blanco lechoso

Una pantalla blanca suave con ribete vintage cálido para una luz suave y difusa.

ColorBlanco lechoso
AcabadoVidrio
Tamaño32 cm / 12.6 in

Detalles del producto

Escala compacta, luz cálida, fácil combinación con la habitación.

Úselo como un colgante enfocado para rincones de comedor, dormitorios, esquinas junto a la cama y espacios de estar relajados.

Tamaño de la pantallaDiámetro de 32 cm / 12.6 in; altura aproximada de la pantalla 20 cm / 7.9 in.
Fuente de luzE27
NotaLa bombilla no está incluida.
Sensación del materialPantalla de vidrio lechoso con ribete cálido cosido y detalles en tono latón.
CuidadoLimpie el vidrio y la banda suavemente con un paño seco y suave.

Si tiene alguna pregunta, no dude en contactarnos y le responderemos.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size
CLEARANCESIZE↔PROPORTION · PLACEMENT

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Starting fixture diameter

26 in / 66 cm

With a 9 ft ceiling, a 7 ft clear path leaves about 24 in for the complete drop.

Complete drop = canopy + suspension + fixture body. This is a planning allowance, not a product specification.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 inTABLETOP → LOWEST POINT
30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure
Measure the tabletop, including its width at the widest point.
Size & place
For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check
Center on the table and check the view across it while seated.
30–36 inEVEN CENTERS · CLEAR SHADE GAPSCHECK THE FULL ROW BEFORE DRILLING
30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure
Record counter length, width and the working area below.
Size & place
Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check
Mark equal centers; verify the actual gap between shades rather than using center spacing alone.
ROOM LENGTH12 ft + 14 ft → ABOUT 26 in WIDE
Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure
Record length, width and finished ceiling height.
Size & place
Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check
Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.
LAY OUT EQUAL BAYSEND OFFSET ≈ HALF THE CENTER SPACING
Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure
Mark the full walking route, doors and changes in ceiling height.
Size & place
Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check
Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.
MATCH THE USER’S FACE LEVELSCONCE CENTER ≈ 65–70 in ABOVE FLOOR
Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure
Record mirror dimensions, side wall space and cabinet swing.
Size & place
For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check
Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.
TEST FROM A SEATED POSITIONSHADE HIDES THE BULB · SWITCH WITHIN REACH
Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure
Measure the mattress, nightstand and your seated position.
Size & place
Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check
Check reach to the switch, head movement, pillows and any adjustable arm.
LIGHT FROM BESIDE OR BEHINDKEEP THE BULB OUT OF DIRECT VIEW
A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure
Sit in your usual chair with a book before locating the lamp.
Size & place
Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check
Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.