- 22%

Lampe de table rétro Arivane – Base en céramique et abat-jour tambour vert à motifs pour le salon, la chambre et l’entrée

Charger l'image dans la visionneuse de galerie, Lampe de table rétro Arivane – Base en céramique et abat-jour tambour vert à motifs pour le salon, la chambre et l’entrée

Lampe de table rétro Arivane – Base en céramique et abat-jour tambour vert à motifs pour le salon, la chambre et l’entrée

$321.00 $249.00

Livraison gratuite

Retours sous 14 jours

Paiement sécurisé

Service client

Présentation des détails

Texture, motifs et couleurs expressives

Arivane associe une base sculpturale en céramique à un abat-jour en tissu à motifs audacieux, créant une lampe de table riche en profondeur et en contraste, à la présence décorative distinctive.

Céramique texturée

Une surface facettée irrégulière confère à la base en céramique une profondeur visuelle et un caractère artisanal.

Abat-jour en tissu à motifs

Les motifs géométriques verts apportent couleur et contraste tout en adoucissant la lumière.

Touche de métal chaleureux

Un support compact aux tons laiton crée une transition raffinée entre l’abat-jour et la base en céramique.

Lampe de table Arivane grise dans un salon moderne

Lampe de table Arivane blanche à côté d’un canapé neutre

Lampe de table Arivane blanche dans un salon classique et décontracté

Histoire inspirante

Une touche audacieuse pour les intérieurs savamment composés

Inspirée par les pièces qui mêlent couleur, art et objets précieux, Arivane transforme l’éclairage quotidien en point focal décoratif. Son abat-jour aux couleurs vives et sa base en céramique tactile apportent de la personnalité aux décors classiques comme contemporains.

Pièces idéales

Tables de chevet, tables d’appoint de salon, consoles, coins lecture et bureaux à domicile.

Associations stylistiques

Intérieurs éclectiques, maximalistes, classiques modernes, colorés et délicatement traditionnels.

Ambiance

L’abat-jour en tissu diffuse doucement la lumière, créant une atmosphère chaleureuse et confortable.

Caractéristiques et couleurs

Choisissez la finition qui convient à votre pièce

Les trois couleurs de base en céramique sont associées au même abat-jour en tissu à motifs verts et à la même silhouette sculpturale.

Type de produit	Lampe de table à brancher
Matériaux	Céramique et tissu
Couleurs de la base	Rose, gris et blanc
Couleur de l’abat-jour	Tissu à motifs verts et blancs
Dimensions	Dia 26 cm × H 47 cm / ∅ 10,2″ × H 18,5″
Culot	E26 ou E27, selon la destination
Puissance maximale	40W
Ampoule incluse	Non
Commande	Interrupteur à bouton-poussoir
Source d’alimentation	À brancher
Utilisation recommandée	Pièces intérieures sèches
Entretien	Éteignez et débranchez la lampe avant de la nettoyer. Essuyez la base en céramique avec un chiffon doux et sec, et dépoussiérez délicatement l’abat-jour en tissu.

Options de couleur Dimensions

Lampe de table Arivane avec base en céramique rose, grise ou blanche — **Couleurs de base disponibles**
Rose · Gris · Blanc

Dimensions de la lampe de table Arivane — **Dimensions du produit**
∅ 10,2″ × H 18,5″ / Dia 26 cm × H 47 cm

Les mesures sont prises manuellement et peuvent légèrement varier. Les couleurs peuvent paraître différentes selon l’éclairage et les réglages de chaque écran.

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Lampe de table rétro Arivane – Base en céramique et abat-jour tambour vert à motifs pour le salon, la chambre et l’entrée