- 17%

Black metal wall sconce with ribbed clear glass shade

Wall sconce casting warm light in a hallway corner

Averra ribbed glass outdoor wall sconce installed beside a covered porch wall

Averra matte black wall sconce casting warm light near an entryway

Averra ribbed glass wall light on a protected garden-side wall

Close view of the black round wall plate and metal arm

Close view of the ribbed clear glass shade texture

Charger l'image dans la visionneuse de galerie, Black metal wall sconce with ribbed clear glass shade

Charger l'image dans la visionneuse de galerie, Wall sconce casting warm light in a hallway corner

Charger l'image dans la visionneuse de galerie, Averra ribbed glass outdoor wall sconce installed beside a covered porch wall

Charger l'image dans la visionneuse de galerie, Averra matte black wall sconce casting warm light near an entryway

Charger l'image dans la visionneuse de galerie, Averra ribbed glass wall light on a protected garden-side wall

Charger l'image dans la visionneuse de galerie, Close view of the black round wall plate and metal arm

Charger l'image dans la visionneuse de galerie, Close view of the ribbed clear glass shade texture

Applique murale extérieure en verre côtelé Averra

$300.00 $249.00

Livraison gratuite

Retours sous 14 jours

Paiement sécurisé

Service client

Applique murale extérieure Averra en verre cannelé

Un luminaire mural noir compact avec verre cannelé transparent, texture chaleureuse et profil mural soigné pour les entrées couvertes, couloirs, murs de porche et passages côté jardin.

Détail

Verre texturé avec lignes métalliques épurées

L’abat-jour cannelé transparent divise la lueur en reflets verticaux doux, tandis que la plaque murale ronde et le bras droit maintiennent le luminaire net contre le mur.

La texture du verre transparent ajoute un éclat visible sans abat-jour volumineux.

Le métal noir mat donne au petit luminaire un aspect extérieur défini.

La projection compacte fonctionne bien à côté des portes et des passages étroits.

Vue rapprochée de la texture cannelée de l’abat-jour en verre transparent

Vue rapprochée de la plaque murale ronde noire et du bras en métal

Applique murale diffusant une lumière chaude dans un coin de couloir

Ambiance

Un point d’arrivée plus chaleureux

Utilisez Averra lorsqu’un mur a besoin d’un petit point d’ancrage visuel : près d’une porte couverte, le long d’un couloir, à côté d’une colonne de porche ou sur un mur de jardin protégé de l’exposition directe.

L’abat-jour en verre crée une lueur texturée sur les surfaces proches.

La silhouette en métal sombre s’accorde facilement avec le bois, la pierre et les murs peints.

Applique murale noire montée près d’une porte

Spécifications

Dimensions, matériaux et usage extérieur

Un luminaire mural fin pour les zones extérieures couvertes ou protégées. L’IP23 est destiné aux emplacements abrités, et le luminaire est fourni sans ampoule.

Matériau Corps en fer noir avec abat-jour en verre cannelé transparent

Dimensions 12 x 27 x 20 cm / 4,7 x 10,6 x 7,9 pouces

Finition de surface Métal noir mat avec verre texturé transparent

Indice de protection IP23 ; pour les zones extérieures couvertes ou protégées

Environnement adapté Porche couvert, entrée, couloir, mur de jardin protégé ; éviter une exposition continue aux intempéries directes

Base de l'ampoule Base à vis E27

Ampoules incluses Non

Option Appareil uniquement

Entretien Essuyez doucement le métal et le verre avec un chiffon doux et sec

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Applique murale extérieure en verre côtelé Averra

Applique murale extérieure Averra en verre cannelé