Charger l'image dans la visionneuse de galerie, Black Glass Outdoor Wall Lantern Sconce

Lanterne murale extérieure en verre noir

$299.00

Livraison gratuite

Retours sous 14 jours

Paiement sécurisé

Service client

Cadre noir, verre transparent, échelle extérieure

Un profil de lanterne épuré pour les entrées, patios, balcons et murs de jardin.

Le cadre noir mat garde la silhouette nette, tandis que le verre transparent laisse l'ampoule visible sans faire de la couleur de l'ampoule une option produit. Les clients peuvent choisir leur ampoule préférée localement.

Détail du bras courbé noir mat et de l'abat-jour en verre transparent

Détail rapproché de la plaque murale noire mate

Plaque murale carrée

Une plaque arrière compacte maintient le luminaire net contre le stuc, la brique, le bardage ou les murs extérieurs peints.

Angle de la lanterne extérieure en verre transparent

Abat-jour en verre transparent

Le verre effilé montre l'ampoule et garde le contour de la lanterne ouvert plutôt que lourd.

Vue avant de la lanterne extérieure noire

Protection inférieure ouverte

Le détail simple du rail ajoute une touche vintage extérieure tout en gardant un profil facile à assortir.

Lanterne murale extérieure installée près d'une porte vitrée

Lanterne extérieure éclairant des plantes sur un mur extérieur

Lanterne extérieure à côté d'une fenêtre d'entrée

Lanterne murale extérieure près d'un chemin de jardin

Lanterne murale extérieure installée sur un mur en pierre extérieur

Placement extérieur

Utilisez-en une près d'une porte ou répétez le long d'un mur extérieur pour un rythme cohérent en soirée.

La projection compacte convient aux porches, patios, balcons, murs de jardin, entrées et portes latérales. Le luminaire est câblé et doit être installé par un électricien qualifié.

Ambiance extérieure

Une lanterne noire qui paraît architecturale en plein jour et chaleureuse après le crépuscule.

Le verre transparent garde la lampe visuellement légère, permettant au luminaire de se placer près des plantes, portes, fenêtres, pierres et murs peints sans concurrencer la façade.

Idéal pour des installations répétéesUtilisez plusieurs luminaires le long d'un mur de patio ou d'un couloir extérieur.

Ampoule non incluseLa luminosité et la couleur de la lumière dépendent de l'ampoule choisie par le client.

Finition noire épuréeLa finition mate s'associe facilement avec la quincaillerie extérieure moderne et vintage.

Profil en verre transparentL'abat-jour transparent évite l'encombrement visuel sur les petits murs extérieurs.

Lanterne murale extérieure en verre noir dans un cadre extérieur

Vue du produit lanterne murale extérieure en verre noir

Couleur, finition et taille

Une finition noire avec dimensions complètes du luminaire mural.

CouleurNoir

FinitionNoir mat

TailleDimensions totales L 21 cm x H 31 cm x P 28 cm / L 8,3 in x H 12,2 in x P 11 in

Taille de la plaque arrièreL 9 cm x H 16 cm / L 3,5 in x H 6,3 in

MatériauCorps en fer avec abat-jour en verre transparent

AmpouleAmpoule non incluse ; type de source lumineuse : E27 ; le client choisit l'ampoule et la couleur de lumière préférées

InstallationMontage mural câblé par un électricien qualifié

La couleur de l'éclairage n'est pas listée comme option de produit car ce luminaire ne comprend pas d'ampoule.

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Lanterne murale extérieure en verre noir