Vente de luminaires pour la fête du Travail : profitez de 20 % de réduction
SKU/Product: Small black walnut serving board
Scene: bread serving on table
SKU/Product: Large black walnut serving board
SKU/Product: Small and Large set
Scene: kitchen wall storage
Detail: rounded loop handle
Detail: walnut grain and beveled edge
Detail: serving surface and size pairing
Charger l'image dans la visionneuse de galerie, SKU/Product: Small black walnut serving board
Charger l'image dans la visionneuse de galerie, Scene: bread serving on table
Charger l'image dans la visionneuse de galerie, SKU/Product: Large black walnut serving board
Charger l'image dans la visionneuse de galerie, SKU/Product: Small and Large set
Charger l'image dans la visionneuse de galerie, Scene: kitchen wall storage
Charger l'image dans la visionneuse de galerie, Detail: rounded loop handle
Charger l'image dans la visionneuse de galerie, Detail: walnut grain and beveled edge
Charger l'image dans la visionneuse de galerie, Detail: serving surface and size pairing

Planche de service en noyer noir avec poignée en boucle – plateau en bois pour pain et fromage, idéal pour la décoration de la cuisine

$99.00

12% DE RÉDUCTION

Achetez-en 1

M12

15% DE RÉDUCTION

Achetez-en 2

M15

18% DE RÉDUCTION

Achetez 3 ou plus

M18

$60 DE RÉDUCTION

Commandes de plus de 330 $

M60

$100 DE RÉDUCTION

Commandes de plus de 500 $

M100
Il ne reste que 9999 article(s) en stock
Question

Question

Informations sur l'expédition

Informations sur l'expédition

Politique de retour : Vous disposez de 14 jours après réception de votre commande pour demander un retour.

Disponibilité : Nous livrons aux États-Unis.

Délai de traitement : Le traitement des commandes prend 1 à 2 jours ouvrés (du lundi au vendredi).

Livraison gratuite
Retours sous 14 jours
Paiement sécurisé
Service client
Présentation des détails

Veinage du noyer noir, bords arrondis et poignées faciles à saisir.

La planche conserve une forme sculptée pensée pour le service, tout en mettant en valeur les mouvements naturels du bois, les bords adoucis et une généreuse poignée en boucle pour la présentation à table ou le rangement mural.

Poignée en boucle arrondie sur une planche de service en noyer noir

Poignée en boucle arrondie

La poignée en boucle lisse est facile à tenir et permet de suspendre proprement la planche lorsqu’elle n’est pas utilisée.

Veinage du noyer noir et bord arrondi de la planche

Veinage naturel du noyer

Les variations visibles du veinage confèrent à chaque planche une surface chaleureuse et organique, avec une élégance raffinée.

Détail de la surface de service des planches assorties en noyer noir

Bord de service adouci

Les bords arrondis et la large surface plane conviennent au pain, au fromage, aux fruits et à une mise en table simple.

Planche de service en noyer noir mise en scène avec du pain sur une table de salle à manger
Inspiration pour la pièce

Une planche chaleureuse pour le pain, le fromage et les tables conviviales.

La teinte profonde du noyer s’accorde naturellement avec le lin, la faïence, les accents en laiton et les textures de cuisine rustiques. Utilisez-la comme planche de service, planche à pain ou simple élément décoratif pour des réunions décontractées.

Service du pain Planches à fromage Mise en scène de la cuisine
Image de la planche de service en noyer noir petit format, SKU
PetitL 7,9″ × H 11,8″ / L 20 cm × H 30 cm
Image de la planche de service en noyer noir grand format, SKU
GrandL 7,9″ × H 15″ / L 20 cm × H 38 cm
Image de l’ensemble de planches de service en noyer noir, petit et grand, SKU
Petit + grandEnsemble de planches assorties avec une finition en noyer noir coordonnée.
Caractéristiques du produit

Fabriquée en bois naturel, chaque planche est unique.

MatériauBois de noyer noir
CouleurNoyer noir
Options de formatPetit, grand, petit + grand
Petit formatL 7,9″ × H 11,8″ / L 20 cm × H 30 cm
Grand formatL 7,9″ × H 15″ / L 20 cm × H 38 cm
Épaisseur0,9″ / 2 cm
UtilisationPain, fromage, fruits et service à table
EntretienLavez à la main et séchez rapidement après utilisation

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size
CLEARANCESIZE↔PROPORTION · PLACEMENT

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Starting fixture diameter

26 in / 66 cm

With a 9 ft ceiling, a 7 ft clear path leaves about 24 in for the complete drop.

Complete drop = canopy + suspension + fixture body. This is a planning allowance, not a product specification.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 inTABLETOP → LOWEST POINT
30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure
Measure the tabletop, including its width at the widest point.
Size & place
For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check
Center on the table and check the view across it while seated.
30–36 inEVEN CENTERS · CLEAR SHADE GAPSCHECK THE FULL ROW BEFORE DRILLING
30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure
Record counter length, width and the working area below.
Size & place
Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check
Mark equal centers; verify the actual gap between shades rather than using center spacing alone.
ROOM LENGTH12 ft + 14 ft → ABOUT 26 in WIDE
Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure
Record length, width and finished ceiling height.
Size & place
Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check
Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.
LAY OUT EQUAL BAYSEND OFFSET ≈ HALF THE CENTER SPACING
Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure
Mark the full walking route, doors and changes in ceiling height.
Size & place
Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check
Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.
MATCH THE USER’S FACE LEVELSCONCE CENTER ≈ 65–70 in ABOVE FLOOR
Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure
Record mirror dimensions, side wall space and cabinet swing.
Size & place
For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check
Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.
TEST FROM A SEATED POSITIONSHADE HIDES THE BULB · SWITCH WITHIN REACH
Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure
Measure the mattress, nightstand and your seated position.
Size & place
Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check
Check reach to the switch, head movement, pillows and any adjustable arm.
LIGHT FROM BESIDE OR BEHINDKEEP THE BULB OUT OF DIRECT VIEW
A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure
Sit in your usual chair with a book before locating the lamp.
Size & place
Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check
Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.