Style D brass pendant light with clear crackle glass cylinder shade

brass glass pendant light used as warm bedside lighting

clear glass brass pendant light installed above a small dining table

Style B brass pendant light with ribbed round clear glass shade

brass crackle glass pendant light glowing beside a bright window

Style C brass pendant light with faceted clear glass shade

ribbed clear glass pendant light glowing over a bedside nightstand

Style A brass pendant light with round clear crackle glass shade

clear crackle glass shade glowing with warm light

ribbed clear glass pendant shade with warm bulb glow

brass socket hardware and clear glass pendant shade detail

Charger l'image dans la visionneuse de galerie, Style D brass pendant light with clear crackle glass cylinder shade

Charger l'image dans la visionneuse de galerie, brass glass pendant light used as warm bedside lighting

Charger l'image dans la visionneuse de galerie, clear glass brass pendant light installed above a small dining table

Charger l'image dans la visionneuse de galerie, Style B brass pendant light with ribbed round clear glass shade

Charger l'image dans la visionneuse de galerie, brass crackle glass pendant light glowing beside a bright window

Charger l'image dans la visionneuse de galerie, Style C brass pendant light with faceted clear glass shade

Charger l'image dans la visionneuse de galerie, ribbed clear glass pendant light glowing over a bedside nightstand

Charger l'image dans la visionneuse de galerie, Style A brass pendant light with round clear crackle glass shade

Charger l'image dans la visionneuse de galerie, clear crackle glass shade glowing with warm light

Charger l'image dans la visionneuse de galerie, ribbed clear glass pendant shade with warm bulb glow

Charger l'image dans la visionneuse de galerie, brass socket hardware and clear glass pendant shade detail

Suspension en verre craquelé laiton

$149.00

Livraison gratuite

Retours sous 14 jours

Paiement sécurisé

Service client

Verre clair, laiton chaud, format compact

Une petite suspension avec texture vintage

Cette suspension en laiton associe un abat-jour en verre texturé clair à des ferrures métalliques chaudes, offrant aux chambres, coins repas, bureaux, bars et chevets une zone lumineuse ambiante ciblée sans lourdeur.

Le verre clair garde la silhouette légère et facile à styliser.
La finition laiton ajoute un accent vintage chaleureux aux intérieurs.
Le format compact de la suspension fonctionne bien en paire ou comme lumière suspendue unique de chevet.

Suspension en verre clair et laiton installée au-dessus d'une petite table à manger

Détails visibles

Texture qui capte la lumière

Verre craquelé clair

L'abat-jour transparent montre une fine texture craquelée qui diffuse la lumière en un motif décoratif plus doux.

Abat-jour en verre clair côtelé avec lueur chaude de l'ampoule

Options de verre à motifs

Les versions côtelées et facettées ajoutent plus d'éclat tout en conservant la même histoire de matériaux en verre clair et laiton.

Détail de la douille en laiton et de l'abat-jour en verre clair

Ferrures en laiton chaud

La douille et le capuchon ont une finition laiton pour un aspect vieilli et raffiné qui s'accorde avec le bois, le lin, la pierre et le plâtre.

Suspension en laiton et verre utilisée comme éclairage chaleureux de chevet

Guide de scène

Utilisez-la là où une pièce a besoin d'un point focal discret

Installez une suspension à côté d'un lit, au-dessus d'une petite table de lecture, au-dessus d'un comptoir de bar ou dans un coin repas compact. Pour des comptoirs plus larges ou des tables longues, répétez le même style à intervalles réguliers pour un rythme d'éclairage équilibré.

Dimensions du style	A : ∅ 5,9″ × H 8,9″ / Diamètre 15 cm × H 22,5 cm B : ∅ 5,9″ × H 9,5″ / Diamètre 15 cm × H 24 cm C : ∅ 5,9″ × H 9,1″ / Diamètre 15 cm × H 23 cm D : ∅ 5,9″ × H 6,9″ / Diamètre 15 cm × H 17,5 cm
Rosace et cordon	Rosace de plafond : ∅ 3,5" / Diamètre 9 cm. Cordon de suspension : env. 200 cm / 78,7", réglable lors de l'installation.
Couleur	Verre clair
Matériaux	Abat-jour en verre clair texturé avec ferrures en métal finition laiton
Source lumineuse	E27 / E14
Espaces recommandés	Chevet de chambre, coin repas, bureau, comptoir de bar, table de restaurant, accent de couloir
Entretien	Coupez l'alimentation avant de nettoyer. Dépoussiérez le verre et les surfaces en laiton avec un chiffon doux et sec.

Suspension Style A en laiton avec abat-jour rond en verre craquelé transparent — Style A

Suspension Style B en laiton avec abat-jour rond en verre clair côtelé — Style B

Suspension Style C en laiton avec abat-jour en verre clair facetté — Style C

Suspension Style D en laiton avec abat-jour cylindrique en verre craquelé transparent — Style D

Avant d'acheter

Si vous rencontrez des problèmes avec les produits, veuillez nous contacter et nous vous répondrons sous 24 heures.
Veuillez noter et comprendre : en raison des différents moniteurs et méthodes de mesure, des différences de couleur et de dimensions sont inévitables.
Cette commande n'inclut pas les ampoules.

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Suspension en verre craquelé laiton

Une petite suspension avec texture vintage