Brushed brass half dome pendant light against a green wall

Brass dome pendant light in a warm interior setting

Half dome brass pendant light above a dining corner

Aged matte brass half dome pendant 30 cm

Close view of brushed brass dome shade finish

Aged matte brass half dome pendant 40 cm

Aged matte brass dome pendant light in a calm room

Aged brass half dome pendant with chain suspension 40 cm

Large aged matte brass dome pendant light with warm inner finish

Aged bright brass three-light half dome pendant 50 cm

Large aged brass dome pendant light with chain suspension

Close view of brass pendant stem and ceiling connection

Close view of rolled brass shade edge and brushed texture

Warm inner brass finish on dome pendant shade

Charger l'image dans la visionneuse de galerie, Bright brass half dome pendant 25 cm

Charger l'image dans la visionneuse de galerie, Brushed brass half dome pendant light against a green wall

Charger l'image dans la visionneuse de galerie, Bright brass half dome pendant 30 cm

Charger l'image dans la visionneuse de galerie, Brass dome pendant light in a warm interior setting

Charger l'image dans la visionneuse de galerie, Bright brass half dome pendant 40 cm

Charger l'image dans la visionneuse de galerie, Half dome brass pendant light above a dining corner

Charger l'image dans la visionneuse de galerie, Aged matte brass half dome pendant 30 cm

Charger l'image dans la visionneuse de galerie, Close view of brushed brass dome shade finish

Charger l'image dans la visionneuse de galerie, Aged matte brass half dome pendant 40 cm

Charger l'image dans la visionneuse de galerie, Aged matte brass dome pendant light in a calm room

Charger l'image dans la visionneuse de galerie, Aged brass half dome pendant with chain suspension 40 cm

Charger l'image dans la visionneuse de galerie, Large aged matte brass dome pendant light with warm inner finish

Charger l'image dans la visionneuse de galerie, Aged bright brass three-light half dome pendant 50 cm

Charger l'image dans la visionneuse de galerie, Large aged brass dome pendant light with chain suspension

Charger l'image dans la visionneuse de galerie, Close view of brass pendant stem and ceiling connection

Charger l'image dans la visionneuse de galerie, Close view of rolled brass shade edge and brushed texture

Charger l'image dans la visionneuse de galerie, Warm inner brass finish on dome pendant shade

Suspension en laiton avec demi-dôme

$369.00

Style: Laiton brillant

Laiton brillant

Laiton mat vieilli

Laiton brillant vieilli

Chaîne en laiton vieilli

Taille: Petit 25cm / 9.8 po

Petit 25cm / 9.8 po

Moyen 30cm / 11.8 po

Grande 40cm / 15.7 po

50cm Trois lumières

Il ne reste que 9999 article(s) en stock

Quantité

Livraison gratuite

Retours sous 14 jours

Paiement sécurisé

Service client

PRÉSENTATION DES DÉTAILS

Abat-jours bombés en laiton brossé, finition intérieure chaleureuse et suspension minimaliste.

Ce luminaire suspendu en demi-dôme présente un profil d’abat-jour en laiton épuré, avec des options de finition brillante et vieillie pour les salles à manger, les cuisines, les bureaux, les comptoirs de cafés, les bars, les magasins de vêtements et les intérieurs de style loft.

Abat-jour bombé en laiton brosséL’abat-jour métallique arrondi préserve une silhouette simple, tandis que la surface en laiton brossé ajoute une texture visible.

Finition intérieure chaleureuseLa teinte intérieure en laiton confère au luminaire suspendu un aspect visuel plus chaleureux, sans ampoule incluse.

Suspension par cordonLe cordon fin du luminaire suspendu préserve la pureté de la ligne du plafond au-dessus des comptoirs, des tables et des coins lecture.

HISTOIRE INSPIRANTE

Laiton vintage doux pour coins repas, îlots de cuisine, cafés et espaces de lecture.

Utilisez la version de 25 cm ou de 30 cm au-dessus des comptoirs compacts et dans les coins près du lit, et la version de 40 cm au-dessus des espaces repas ou des îlots de cuisine plus grands.

SPÉCIFICATIONS DU PRODUIT

Dimensions du plafonnier suspendu, options de finition et principales spécifications.

Consultez les styles d’abat-jour en laiton disponibles à gauche, puis vérifiez les dimensions, le matériau, les dimensions du colis, la remarque sur l’ampoule et les détails d’utilisation par pièce dans le tableau des spécifications.

Laiton brillant / petit 25 cm / 9,8 po

Laiton brillant / moyen 30 cm / 11,8 po

Laiton brillant / grand 40 cm / 15,7 po

Laiton mat vieilli / moyen 30 cm / 11,8 po

Laiton mat vieilli / grand 40 cm / 15,7 po

Styles disponibles	Laiton brillant, laiton mat vieilli
Dimensions disponibles	Petit 25 cm / 9,8 po, moyen 30 cm / 11,8 po, grand 40 cm / 15,7 po
Matériau	Abat-jour en métal couleur laiton / cuivre
Finition	Laiton brillant ou laiton mat vieilli
Type de source lumineuse	Source lumineuse LED
Ampoule incluse	Non
Remarque sur l’ampoule	Le type d’ampoule et les exigences électriques locales doivent être vérifiés avant l’installation.
Dimensions du colis	Petit : 30 × 30 × 20 cm ; moyen : 35 × 35 × 20 cm ; grand : 40 × 40 × 23 cm
Espaces recommandés	Salle à manger, cuisine, bureau, café, bar, café-restaurant, magasin de vêtements, intérieur de loft

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Suspension en laiton avec demi-dôme

Abat-jours bombés en laiton brossé, finition intérieure chaleureuse et suspension minimaliste.

Laiton vintage doux pour coins repas, îlots de cuisine, cafés et espaces de lecture.

Dimensions du plafonnier suspendu, options de finition et principales spécifications.

Customer Reviews

Lighting that fits.
A room that feels right.

A useful starting point, in seconds.

Work with your ceiling.

Keep it close

Balance the drop

Scale with intention

Dining table

Kitchen island

Room center

Hallway & entry

Bathroom vanity

Bedroom & bedside

Reading & living

One installation checklist.

Mock up the final position

Verify the mounting

Match the electrical details

Questions before you choose.

A little measuring. A better fit.

Vous aimerez peut-être aussi

Informations

Avis de politique

Infolettre

Langue

Se connecter

Réinitialiser votre mot de passe

Suspension en laiton avec demi-dôme

12% DE RÉDUCTION

15% DE RÉDUCTION

18% DE RÉDUCTION

$60 DE RÉDUCTION

$100 DE RÉDUCTION

Question

Informations sur l'expédition

Abat-jours bombés en laiton brossé, finition intérieure chaleureuse et suspension minimaliste.

Laiton vintage doux pour coins repas, îlots de cuisine, cafés et espaces de lecture.

Dimensions du plafonnier suspendu, options de finition et principales spécifications.

Customer Reviews

Lighting that fits.A room that feels right.

A useful starting point, in seconds.

Work with your ceiling.

Keep it close

Balance the drop

Scale with intention

Dining table

Kitchen island

Room center

Hallway & entry

Bathroom vanity

Bedroom & bedside

Reading & living

One installation checklist.

Mock up the final position

Verify the mounting

Match the electrical details

Questions before you choose.

A little measuring. A better fit.

Vous aimerez peut-être aussi

Lighting that fits.
A room that feels right.