- 13%

Ivory travertine carved square wall sconce with warm LED backlight

Ivory carved travertine wall sconce installed on a neutral wall

Travertine square wall light illuminating a hallway or living room wall

Square travertine wall sconce used as bedside ambient lighting

Black travertine carved square wall sconce with warm LED backlight

Pair of carved travertine wall sconces installed on a modern wall

Close detail of natural travertine pores and irregular stone texture

Carved stone relief face detail on a square travertine wall lamp

Enlarged close-up of natural travertine texture and pores

Charger l'image dans la visionneuse de galerie, Ivory travertine carved square wall sconce with warm LED backlight

Charger l'image dans la visionneuse de galerie, Ivory carved travertine wall sconce installed on a neutral wall

Charger l'image dans la visionneuse de galerie, Travertine square wall light illuminating a hallway or living room wall

Charger l'image dans la visionneuse de galerie, Square travertine wall sconce used as bedside ambient lighting

Charger l'image dans la visionneuse de galerie, Black travertine carved square wall sconce with warm LED backlight

Charger l'image dans la visionneuse de galerie, Pair of carved travertine wall sconces installed on a modern wall

Charger l'image dans la visionneuse de galerie, Close detail of natural travertine pores and irregular stone texture

Charger l'image dans la visionneuse de galerie, Carved stone relief face detail on a square travertine wall lamp

Charger l'image dans la visionneuse de galerie, Enlarged close-up of natural travertine texture and pores

Applique murale LED en travertin sculpté

$375.00 $325.00

En stock

Livraison gratuite

Retours sous 14 jours

Paiement sécurisé

Service client

Éclairage en pierre naturelle sculptée

Un appliqué mural carré en travertin avec texture sculptée et lumière d’ambiance chaude.

La pierre naturelle donne à chaque lampe ses propres pores, lignes et variations minérales. La forme carrée discrète de 25 cm est proche du mur tandis que la lueur LED chaude adoucit les chambres, couloirs, salons et coins tranquilles.

Pierre sculptée en relief, pas une plaque murale plate

La surface géométrique en relief capte l’ombre même lorsque la lumière est éteinte. Lorsqu’elle est allumée, la face et le dos en pierre créent un effet de lavage mural calme sans transformer le luminaire en encombrement visuel.

Face de lampe murale en travertin sculptée en trois dimensions — Face sculptée en trois dimensions

Pores naturels du travertin et texture irrégulière de la pierre — Pores naturels du travertin

Profondeur latérale et profil du bord de la pierre — Profondeur murale de 4 cm

Appliqué mural carré en travertin utilisé comme éclairage d’ambiance près du lit

Lumière chaude pour des intérieurs en couches

Un point focal discret pour les murs près du lit, les couloirs et les espaces de vie modernes.

Utilisez un appliqué à côté d’un lit ou d’un fauteuil de lecture, ou installez une paire le long d’un couloir ou d’un mur décoratif. La forme carrée compacte garde la disposition épurée tandis que la texture de la pierre ajoute un caractère artisanal.

Couleurs et spécifications

Deux finitions en pierre, même format LED chaud 14W.

‹Faites glisser ou utilisez les flèches pour comparer les finitions disponibles›

Travertin ivoire / 25 cm / Lumière chaude — Travertin ivoire / Lumière chaude

Travertin noir / 25 cm / Lumière chaude — Travertin noir / Lumière chaude

Matériau	Corps en pierre de travertin naturel et abat-jour en pierre
Dimensions	L 25 cm × H 25 cm × P 4 cm / L 9,8″ × H 9,8″ × P 1,6″
Source lumineuse	Lumière chaude
Tension	Compatible 110V-220V selon la source
Contrôle	Commande par interrupteur mural ; alimentation câblée non intelligente
Couverture	Environ 3 m² / 32 ft² éclairage d'accentuation
Espaces recommandés	Zone de meuble de salle de bain, salon, couloir, cuisine, bureau, mur près du lit
Note sur la pierre naturelle	Les pores minéraux, les lignes, les variations de couleur, les petits creux et la texture irrégulière sont des caractéristiques normales de la pierre naturelle.
Note d'installation	Monté au mur et câblé en dur. Une installation professionnelle est recommandée pour le câblage local et la conformité au code du bâtiment.

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

A story in stone

Travertine does not simply cover a light — it gives the glow a sense of place.

Formed by mineral-rich water over time, travertine carries the quiet marks of its origin. Its warm surface brings a grounded, natural presence to every lighting form.

Natural character

No two surfaces are ever the same.

Open pores, soft layers and gentle tonal shifts are part of travertine's identity. Every piece reveals a different balance of texture, warmth and mineral detail.

Open pores

Pure texture

Small cavities and a softly honed face keep the stone tactile and honest.

Mineral layers

Quiet movement

Flowing bands create depth through gentle shifts in cream, sand and ivory.

Cut surface

Edge revealed

A cut edge shows the natural structure held inside every slab.

Natural depth

Light within

Fine mineral variation becomes more luminous as light moves across the surface.

Where it belongs

Travertine, at home.

SCENE 01

Around the table

Natural texture brings warmth to the places where we gather.

Travertine and fabric wall light for a calm bedside setting

SCENE 02

By the bedside

Pair tactile stone with soft light for a calmer end to the day.

Travertine wall light beside a chair and window

SCENE 03

In a quiet corner

A small pool of light gives everyday corners a sense of place.

Travertine ceiling light in a bright entry hallway

SCENE 04

Along the hallway

Warm stone and gentle illumination make every arrival feel inviting.

From quarry to creation

Five stages of quiet craftsmanship.

Each piece begins as raw stone and moves through careful, unhurried steps. The aim is to reveal the material's character while shaping it for everyday use.

01 / SELECTION

Material selection

Blocks are assessed for structure, tone and the natural depth of their pores.

02 / CUTTING

Precision cutting

Diamond tools follow the slab's grain to create clean, workable sections.

03 / SHAPING

Sculpting

The stone is hollowed and formed until its profile feels balanced from every angle.

04 / POLISHING

Hand polishing

Finer abrasives refine the surface while keeping the stone's honest texture visible.

05 / ASSEMBLY

Final assembly

Lighting components and finished stone parts are fitted and checked one piece at a time.

Important · handling & care

Treat it as the rare object it is.

Travertine is genuine natural stone. Handle every piece with care and keep the surface dry, clean and free from abrasive products.

Support the stone body when moving.

Carry stone components with both hands and protect the edges from knocks during unpacking, styling or installation.

Give larger pieces two-person support.

Natural stone has real weight. Use a second pair of hands for larger components and never place weight on a thin edge.

Clean gently; dust often.

Use a dry, soft cloth. Avoid water, solvents, acids and abrasive cleaners, which can mark the porous surface.

Travertine, explained

Frequently asked questions.

A few simple answers before your natural stone piece arrives.

Is every travertine piece unique?

Yes. Pores, small voids, veining and tonal shifts are natural features of the stone. They may differ slightly from the photographs and from one piece to another.

Will travertine change colour over time?

Travertine can develop a gently warmer appearance as it settles into a room. Keep it away from prolonged moisture and direct chemical cleaners to preserve its finish.

How should I clean the stone?

Dust with a dry microfiber cloth. Do not spray cleaner directly onto the stone, wood trim or electrical components.

Can I request a specific vein or colour?

Natural variation is part of travertine, so a particular pore pattern, vein or tonal range cannot be selected or guaranteed.

Is natural variation a defect?

No. Variation is part of the material's character and is expected in genuine natural stone.

Complete the collection

Travertine, room by room.

Discover coordinated ceiling, wall and pendant lights shaped by the same natural stone story.

Explore the Travertine series

Plus d'articles de cette collection

20% désactivé

Ajouter au panier

Aperçu rapide

Exemple de titre de produit

$19.99

$29.99

20% désactivé

Ajouter au panier

Aperçu rapide

Exemple de titre de produit

$19.99

$29.99

20% désactivé

Ajouter au panier

Aperçu rapide

Exemple de titre de produit

$19.99

$29.99

20% désactivé

Ajouter au panier

Aperçu rapide

Exemple de titre de produit

$19.99

$29.99

Langue

Se connecter

Réinitialiser votre mot de passe

Applique murale LED en travertin sculpté

12% DE RÉDUCTION

15% DE RÉDUCTION

18% DE RÉDUCTION

$60 DE RÉDUCTION

$100 DE RÉDUCTION

Question

Un appliqué mural carré en travertin avec texture sculptée et lumière d’ambiance chaude.

Pierre sculptée en relief, pas une plaque murale plate

Un point focal discret pour les murs près du lit, les couloirs et les espaces de vie modernes.

Deux finitions en pierre, même format LED chaud 14W.

Customer Reviews

Lighting that fits.A room that feels right.

A useful starting point, in seconds.

Work with your ceiling.

Keep it close

Balance the drop

Scale with intention

Dining table

Kitchen island

Room center

Hallway & entry

Bathroom vanity

Bedroom & bedside

Reading & living

One installation checklist.

Mock up the final position

Verify the mounting

Match the electrical details

Questions before you choose.

A little measuring. A better fit.

Travertine does not simply cover a light — it gives the glow a sense of place.

No two surfaces are ever the same.

Pure texture

Quiet movement

Edge revealed

Light within

Travertine, at home.

Around the table

By the bedside

In a quiet corner

Along the hallway

Five stages of quiet craftsmanship.

Material selection

Precision cutting

Sculpting

Hand polishing

Final assembly

Treat it as the rare object it is.

Support the stone body when moving.

Give larger pieces two-person support.

Clean gently; dust often.

Frequently asked questions.

Travertine, room by room.

Plus d'articles de cette collection

Vous aimerez peut-être aussi

Lighting that fits.
A room that feels right.