Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Les panneaux de verre texturé ambre, vert et clair donnent à cette applique murale compacte un aspect vitrail fait main. La base ronde en bois et le bras ton laiton apportent un accent chaleureux aux murs sans surcharger la pièce.

Les vues rapprochées montrent les panneaux de verre texturé, le cadre en métal foncé, la douille en métal chaud et la plaque murale ronde aspect bois. L’abat-jour superposé crée couleur et profondeur tout en gardant une silhouette nette pour les intérieurs quotidiens.


Parcourez les scènes de la pièce pour voir l’applique à côté d’un fauteuil de lecture, d’un miroir, d’un canapé et d’un mur de chevet.




| Type | Applique murale |
|---|---|
| Matériaux | Abat-jour en verre texturé ; base ronde aspect bois ; bras et cadre en métal |
| Finition | Verre coloré avec métal ton laiton et base ton bois foncé |
| Abat-jour | Taille de l’abat-jour : ∅ 10 cm × H 12 cm |
| Base | Taille de la base de la lampe : ∅ 12 cm × P 1,0 cm |
| Source lumineuse | E27 (non inclus) |
| Meilleurs emplacements | Couloir, chevet, coin lecture, mur miroir, salon |
| Entretien | Essuyez délicatement le verre, le métal et la base avec un chiffon doux et sec |

Monulo · The practical guide
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 · Get the scale right
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 · Look up
The available drop matters as much as the fixture diameter.
Around 8 ft / 2.44 m
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Around 9–10 ft / 2.74–3.05 m
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Let the furniture define the focal point.
Room study 02
Plan the whole row before choosing the quantity.
Room study 03
Use the room formula as a visual starting point.
Room study 04
A consistent rhythm works better than a crowded ceiling.
Room study 05
Put comfortable facial lighting first.
Room study 06
Choose the height from where you actually sit.
Room study 07
Light the page without exposing the source.
03 · Before the tools come out
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 · The last few details
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.