Around 8 ft / 2.44 m
Keep it close
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Lustre en fer à bougies
Les bras en fer incurvés, les douilles en forme de bougie, la colonne centrale façonnée et la chaîne de suspension réglable font de ce lustre un point focal chaleureux pour les salles à manger, les salons et les intérieurs inspirés des cafés.
Inspiration pour la pièce
Choisissez la finition rouge vermillon pour une touche plus chaleureuse ou la finition vert sapin pour une ambiance botanique plus douce. La largeur de 60 cm / 23,6 po convient parfaitement au-dessus des petites tables de salle à manger, dans les coins petit-déjeuner, les espaces de vie décontractés et les espaces repas de style café.
Options et spécifications
Les deux coloris partagent le même corps en fer, la même disposition de 5 douilles E14, la même chaîne de suspension réglable et la même largeur totale de 60 cm / 23,6 po. Les ampoules ne sont pas incluses ; la couleur finale de la lumière dépend des ampoules choisies par le client.
| Type de produit | Lustre en fer à 5 lumières, raccordement fixe |
|---|---|
| Matériau | Corps de lampe en fer forgé avec cadre et abat-jour en fer assortis |
| Options de couleur | Rouge vermillon ; vert sapin |
| Culot d’ampoule | 5 douilles à petit culot à vis E14 |
| Ampoules | Ampoules non incluses. Choisissez des ampoules compatibles conformément aux exigences locales relatives aux luminaires et aux recommandations de l’installateur. |
| Largeur | 60 cm / 23,6 po |
| Hauteur sans chaîne | Environ 50 cm / 19,7 po |
| Hauteur totale | Environ 116 cm / 45,7 po |
| Chaîne de suspension | Réglable lors de l’installation |
| Tension | 111 V–240 V |
| Surface recommandée | 10–18 m² / 108–194 pieds carrés |
| Commande intelligente | Pas de commande intelligente |
| Pièces recommandées | Salle à manger, salon, coin repas, espace de style café, intérieur résidentiel vintage |
| Entretien | Dépoussiérez délicatement avec un chiffon doux et sec. Faites installer le produit par un électricien qualifié. |
Monulo · The practical guide
Find a starting size, see where to place it, and know what to check before installation.
Find your starting size01 · Get the scale right
For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.
Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.
02 · Look up
The available drop matters as much as the fixture diameter.
Around 8 ft / 2.44 m
Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.
Around 9–10 ft / 2.74–3.05 m
Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.
Above 10 ft / 3.05 m
Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.
Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.
Room study 01
Let the furniture define the focal point.
Room study 02
Plan the whole row before choosing the quantity.
Room study 03
Use the room formula as a visual starting point.
Room study 04
A consistent rhythm works better than a crowded ceiling.
Room study 05
Put comfortable facial lighting first.
Room study 06
Choose the height from where you actually sit.
Room study 07
Light the page without exposing the source.
03 · Before the tools come out
Bring the product instructions, room measurements and fixture weight to your installer.
01 / Fit
Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.
02 / Support
Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.
03 / Compatibility
Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.
Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.
04 · The last few details
Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.
No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.
Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.
Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.
No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.
Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.