Bubble glass pendant with clear shade and warm canopy

Bubble glass pendant above a small dining table

Bubble glass pendant in a bright breakfast corner

Bubble glass pendant beside a warm window nook

Bubble glass pendant styled above a cafe table

Bubble glass pendant brass hardware close-up

Bubble glass pendant shade texture close-up

Bubble glass pendant hand-blown shade edge close-up

Charger l'image dans la visionneuse de galerie, Bubble glass pendant with clear shade and warm canopy

Charger l'image dans la visionneuse de galerie, Bubble glass pendant above a small dining table

Charger l'image dans la visionneuse de galerie, Bubble glass pendant in a bright breakfast corner

Charger l'image dans la visionneuse de galerie, Bubble glass pendant beside a warm window nook

Charger l'image dans la visionneuse de galerie, Bubble glass pendant styled above a cafe table

Charger l'image dans la visionneuse de galerie, Bubble glass pendant brass hardware close-up

Charger l'image dans la visionneuse de galerie, Bubble glass pendant shade texture close-up

Charger l'image dans la visionneuse de galerie, Bubble glass pendant hand-blown shade edge close-up

Suspension en verre bullé soufflé à la main et laiton

$149.00

Livraison gratuite

Retours sous 14 jours

Paiement sécurisé

Service client

Présentation des détails

Verre à bulles, éléments métalliques chaleureux et profil de suspension compact.

La suspension conserve une silhouette compacte, tandis que la texture du verre soufflé à la main diffuse une douce lueur autour de la quincaillerie aux tons de laiton.

Gros plan sur la quincaillerie en laiton de la suspension en verre à bulles

Quincaillerie en laiton chaleureux

Les éléments métalliques polis encadrent l’abat-jour compact en verre avec une touche vintage chaleureuse.

Gros plan sur la texture de l’abat-jour de la suspension en verre à bulles

Texture du verre à bulles

De minuscules bulles d’air captent la lumière et confèrent à chaque abat-jour soufflé à la main de subtiles variations.

Bord de l’abat-jour soufflé à la main

L’abat-jour transparent à facettes donne à la suspension une apparence légère au-dessus des surfaces étroites.

‹ ›

Suspension en verre à bulles au-dessus d’une petite table de salle à manger

Suspension en verre à bulles dans un coin petit-déjeuner lumineux

Suspension en verre à bulles près d’un coin fenêtre chaleureux

Suspension en verre à bulles installée au-dessus d’une table de café

‹ ›

Inspiration pour la pièce

Une petite suspension pour les coins de chevet, les coins repas et un éclairage chaleureux superposé.

L’abat-jour transparent en verre à bulles donne à la suspension une apparence légère, tandis que la finition chaleureuse du pavillon confère à cette forme compacte une ambiance vintage, semblable à celle d’un café.

Format compact

L’abat-jour de 14 cm convient parfaitement près des tables de chevet, des comptoirs et des petites tables de salle à manger, sans encombrer le mur.

Style en paire

Utilisez une suspension comme petite touche décorative ou suspendez-en deux pour un éclairage équilibré autour des lits, des miroirs ou d’un bar étroit.

Suspension en verre à bulles avec abat-jour transparent et pavillon aux tons chauds

Spécifications du produit

Les options de pavillon et les détails d’installation réunis dans une vue compacte.

Choisissez un pavillon en fer peint ou un pavillon en laiton, avec le même abat-jour transparent en verre à bulles et la même taille de suspension simple.

Type de produit	Suspension en verre
Matériau de l’abat-jour	Verre à bulles soufflé à la main
Matériau du corps	Quincaillerie en laiton/cuivre
Options de pavillon	Pavillon en fer peint ; pavillon en laiton
Dimensions de l’abat-jour	Diamètre : 14 cm / 5,51 po ; hauteur : 14 cm / 5,51 po
Longueur du cordon	Cordon réglable de 180 cm / 70,87 po
Finition du câble	Cordon doré par défaut
Type de douille	Douille en laiton vintage de style japonais E14 avec intérieur en céramique
Tension	100-240V
Ampoules incluses	Non
Surface recommandée	Jusqu’à 15 m² / 161,46 pi²
Espaces adaptés	Chevet, comptoir de bar, coin repas, intérieur de style café, chambre d’amis

1. Cette commande ne comprend pas les ampoules.

2. Le verre soufflé à la main peut présenter des variations naturelles de bulles, conférant à chaque abat-jour une texture subtilement unique.

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Suspension en verre bullé soufflé à la main et laiton