Hanton Modern Minimalist Nordic Plug-In Wall Sconce for Bathroom and Hallway

Wall lighting

A glass jar on a brass arm

A clear jar hangs from a triangular yoke and a round backplate. Choose antique brass or matte black, and a glass or powder-coated shade. Light falls from the open bottom.

Jar shadeClear, smoke, milk, or coated metal

Two finishesAntique brass or matte black

Open bottomLight drops downward

Antique brass clear glass plug-in sconce switched off, cord plugged into the wall outlet

The same plug-in sconce switched on, warm light through the clear jar

Highlights

Triangular yokeA thin hanger ties the arm to the shade collar.

Side knobA small fitting sits on the shade neck.

Glass or metalClear, smoke, and milk glass, or a powder-coated shade.

Four buildsSmall jar, outdoor small, wide large shade, or a 3-light bar.

Where it works

Small Large 3-Light

Two black plug-in jar sconces with frosted shades beside a bed — Choose by the wall. Small adds one warm light beside a sofa or in a hallway. Large spreads light across a porch or an entry. 3-Light hangs above a mirror and lights it more evenly. All three plug into a nearby outlet.
**Small**A compact light for a sofa corner or hall.

Hang the plate, then plug in below

Turn it on or off with the switch

No new wiring

Large black plug-in sconce with a wide ivory shade on a porch wall — Choose by the wall. Small adds one warm light beside a sofa or in a hallway. Large spreads light across a porch or an entry. 3-Light hangs above a mirror and lights it more evenly. All three plug into a nearby outlet.
**Large**The wide shade throws light farther across a porch or entry.

The brace keeps the longer arm steady

Plug in at a nearby outlet

No new wiring

Three-light black bar sconce with milk glass shades above a bathroom mirror, cord plugged in — Choose by the wall. Small adds one warm light beside a sofa or in a hallway. Large spreads light across a porch or an entry. 3-Light hangs above a mirror and lights it more evenly. All three plug into a nearby outlet.
**3-Light**Three shades give a mirror more even light than one bulb can.

It still plugs in beside the vanity

The switch is included

No new wiring

Close look

The details that change how it feels in the room: clear glass around the bulb, a round brass plate, and the triangular hanger that holds the jar.

Clear jar Brass plate Yoke

Close view of the clear glass jar, brass socket, and lit filament bulb — **Clear jar**Open glass lets the filament show. The bulb is pictured and sold separately.

Close view of the round brass backplate and arm — **Brass plate**A round brushed-brass plate holds the arm to the wall.

Close view of the triangular brass yoke, side knob, and clear glass rim — **Yoke**A thin triangular hanger ties the arm to the shade collar. The side knob sits on the brass neck.

Plug-in advantage

Mount the backplate, then plug into a nearby outlet. No new hardwired circuit is required.

No hardwiringThe listing is the plug-in sconce. Power is meant to come from an outlet after the plate is on the wall.

Move it laterUnplug it and use another outlet. No new circuit is required.

Two finishesAntique brass or matte black. The large outdoor size is matte black only.

Shade rangeClear, smoke, milk, celadon, ivory, dark olive, or dark bronze. Not every shade is in every size.

Four buildsSmall indoor, small outdoor, large outdoor, and a 3-light indoor bar.

Bulb separateA medium-base bulb is pictured. This order does not include bulbs.

Specs and size

Three sizes

Measurements are taken from the size drawings. Width is the overall span marked on each drawing.

Swipe to see each size

Small jar sconce drawing, diameter 7.5 inches, height 13.7 inches — **Small**Compact enough for a hall or sofa wall.

Large wide shade sconce drawing, diameter 16 inches, height 13.5 inches — **Large**A wider shade for a porch or entry wall.

Three-light bar sconce drawing, width 26 inches, height 11.8 inches — **3-light**Long enough to span a bathroom mirror.

Small: Ø 7.5 in / Dia 19 cm
H 13.7 in / H 35 cm

Large: Ø 16 in / Dia 41 cm
H 13.5 in / H 34 cm

3-light: Ø 26 in / Dia 66 cm
H 11.8 in / H 30 cm

Selected style: Small, 1-light indoor / Clear glass / Antique brass

Shades: Clear, Smoke, Milk, Coated Celadon, Powder Ivory, Powder Dark Olive, Powder Dark Bronze

Finishes: Antique brass or matte black. Large outdoor is matte black only.

Materials: Metal arm and backplate. Glass or powder-coated metal shade.

Mount: Round backplate on the small light. Oval backplate and brace on the large light. Center canopy and bar on the 3-light.

Power: Plug-in. Uses a nearby outlet.

Bulb: Medium-base filament bulb shown. Not included.

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Hanton Modern Minimalist Nordic Plug-In Wall Sconce for Bathroom and Hallway