Side view of the Japanese wabi sabi wall sconce with round wooden backplate and brass wall arm

Japanese retro wall sconce installed above a bedside table beside a warm wood bed

Japanese vintage wall sconce installed in an entry hallway beside a wooden door

Wabi sabi wall light installed above a wooden dresser and mirror

Wabi sabi wall sconce installed beside a sofa and wooden cabinet in a calm living room

Unlit Japanese retro wall sconce showing the round backplate, wood stem, brass connector and shallow shade

Japanese wabi sabi wall sconce with walnut wood wall plate, brass arm, green textured shade and frosted globe

Close view of the round wooden wall plate and brass arm connection on the bedside wall lamp

Close view of the warm wood stem, metal collar and textured shallow shade on the wall sconce

Close view of textured ceramic-look shade and frosted globe on the wabi sabi wall light

Charger l'image dans la visionneuse de galerie, Side view of the Japanese wabi sabi wall sconce with round wooden backplate and brass wall arm

Charger l'image dans la visionneuse de galerie, Japanese retro wall sconce installed above a bedside table beside a warm wood bed

Charger l'image dans la visionneuse de galerie, Japanese vintage wall sconce installed in an entry hallway beside a wooden door

Charger l'image dans la visionneuse de galerie, Wabi sabi wall light installed above a wooden dresser and mirror

Charger l'image dans la visionneuse de galerie, Wabi sabi wall sconce installed beside a sofa and wooden cabinet in a calm living room

Charger l'image dans la visionneuse de galerie, Unlit Japanese retro wall sconce showing the round backplate, wood stem, brass connector and shallow shade

Charger l'image dans la visionneuse de galerie, Japanese wabi sabi wall sconce with walnut wood wall plate, brass arm, green textured shade and frosted globe

Charger l'image dans la visionneuse de galerie, Close view of the round wooden wall plate and brass arm connection on the bedside wall lamp

Charger l'image dans la visionneuse de galerie, Close view of the warm wood stem, metal collar and textured shallow shade on the wall sconce

Charger l'image dans la visionneuse de galerie, Close view of textured ceramic-look shade and frosted globe on the wabi sabi wall light

Applique murale japonaise en bois Wabi Sabi

$291.00

Livraison gratuite

Retours sous 14 jours

Paiement sécurisé

Service client

Bois effet noyer, abat-jour vert texturé et atmosphère artisanale discrète.

Texture naturelle dans une applique murale compacte

L’applique associe une plaque murale ronde en bois effet noyer, un bras fin en laiton, une tige en bois tourné, un abat-jour vert texturé peu profond et un globe en verre dépoli. Son faible encombrement préserve une allure apaisée tout en créant un point focal dans les espaces près du lit, les couloirs et les coins dressing.

Abat-jour peu profond texturé

Un abat-jour vert-brun marbré apporte le caractère patiné et naturel propre au wabi-sabi et aux intérieurs japonais vintage.

Structure en bois et en laiton

La plaque murale ronde en bois et le bras en laiton chaleureux donnent à la lampe un aspect artisanal, simple et facile à associer à des meubles en bois.

Ambiance

Une lumière douce pour les pièces où l’on prend son temps

À installer près d’un lit, d’un canapé, d’une porte de couloir ou d’une commode, là où une petite applique murale peut apporter du caractère sans occuper d’espace au sol ou sur une table. Le globe en verre dépoli et la tige verticale en bois ajoutent une discrète touche rétro.

Caractéristiques

Détails du produit

Applique murale japonaise en bois, style wabi-sabi

Dimensions	Ø 20 cm × H 27 cm / Ø 7,9" × H 10,6"
Couleur	Bois effet noyer + vert
Finition	Finition laiton
Ampoule	Ampoule non incluse
Matériaux visibles	Plaque murale et tige en bois effet noyer, bras en métal effet laiton, abat-jour vert texturé peu profond, globe en verre dépoli.
Tension	111 V-240 V
Installation	Applique murale. Une installation électrique fixe par un professionnel est recommandée.
Idéal pour	Chambre, chevet, entrée, couloir, chambre d’hôtel, salon, mur derrière une commode et petits recoins décoratifs.
Entretien	Dépoussiérer délicatement avec un chiffon doux et sec. Couper l’alimentation avant tout nettoyage ou entretien.

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Applique murale japonaise en bois Wabi Sabi