Lampe suspendue enfichable Mayon

Présentation des détails

Verre ambré, façonné par une réflexion chaleureuse

Un abat-jour arrondi en verre brun rencontre une tige sculpturale en bois et un col en métal sombre, apportant de la profondeur et une douce touche vintage à la lampe.

Vue rapprochée de la tige en bois et de la fixation métallique de la suspension Mayon — **Tige sculpturale en bois**
Un profilé en bois tourné apporte un contrepoint organique au verre lisse.

Abat-jour en verre ambré illuminé de la suspension Mayon — **La lueur du verre ambré**
Le verre translucide adoucit la lumière pour créer une lueur chaleureuse et feutrée.

Cordon torsadé et détail de la fixation en laiton de la suspension Mayon — **Des finitions soignées**
Un cordon torsadé et de compacts détails métalliques complètent le design nostalgique à brancher.

Suspension Mayon en verre ambré dans un intérieur aux boiseries chaleureuses

Histoire et inspiration

Une touche de chaleur, où vous en avez besoin

Inspirée par la richesse discrète des intérieurs vintage, Mayon associe du verre couleur miel avec du bois et du métal sombre. Son format à brancher vous permet de vous créez une lumière ciblée sans vous engager à utiliser un point d’éclairage fixe au plafond.

Espaces idéaux

Coins lecture, espaces près du lit, recoins repas, salons et les espaces d’accueil chaleureux et décontractés.

Associations de styles

Associations de styles : moderne chaleureux, milieu du siècle, vintage, éclectique et les intérieurs traditionnels.

Remarque sur l’emplacement

Positionnez solidement le cordon et les points de fixation, en gardant l’abat-jour à l’écart des passages et des surfaces sensibles à la chaleur.

Spécifications et styles

Choisissez les proportions adaptées à votre espace

Les deux tailles d’abat-jour partagent la même palette de matériaux chaleureux et cordon à brancher réglable.

Type de produit	Suspension à brancher
Matériaux	Verre, bois et métal
Finition	Verre brun ambré, bois brun et métal noir
Modèle A	Dia. 18 cm × H 24 cm / ∅ 7″ × H 9.4″
Modèle B	Dia. 28 cm × H 24 cm / ∅ 11″ × H 9.4″
Culot d’ampoule	E26 ou E27, selon la destination (ampoule non incluse)
Puissance maximale	40 W à incandescence ou équivalent LED
Tension	CA 110–240 V
Commande	Interrupteur marche/arrêt intégré au cordon ; compatible avec une ampoule et variateur compatibles (non inclus)
Longueur du cordon	177″ / 450 cm ; réglable lors de l’installation
Certification	Conforme aux exigences de l’Amérique du Nord, Australie, Europe et Moyen-Orient
Entretien	Éteignez la lampe et laissez-la refroidir. Essuyez le verre, le bois et le métal avec un chiffon doux et sec.

Suspension Mayon à brancher, modèle A, avec abat-jour compact arrondi en verre ambré — **Modèle A**
∅ 7″ × H 9.4″

Suspension Mayon à brancher, modèle B, avec large abat-jour en verre ambré — **Modèle B**
∅ 11″ × H 9.4″

Les mesures sont prises manuellement ; de légères variations peuvent survenir. La teinte du verre peut sembler différente selon les conditions d’éclairage. et les réglages de l’écran.

Easy to put up, absolutely solid, beautiful, and the cord length is adjustable. I just coiled it up inside the ceiling plate. so thick and great quality. Definitely worth it!

Bought for my daughter’s home, she loves it and it is beautiful when lit. Very thick and heavy glass, and fittings look a good quality also.

Bought this as part of my partners birthday gifts. She loves it. Must say I do too. Easy to install. I simply wrapped the cord around one of the ceiling bars we have in our lounge and attached the cable to the ceiling and wall using cable clips. Job done!

Highly recommended.
Perfectly described.
Easy to install and thrilled with the results .

Really nice quality

1 2 3

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Lampe suspendue enfichable Mayon

Verre ambré, façonné par une réflexion chaleureuse