Vente de luminaires pour la fête du Travail : profitez de 20 % de réduction
Plafonnier tambour en cristal moderne
Plafonnier tambour en cristal moderne
Plafonnier tambour en cristal moderne
Plafonnier tambour en cristal moderne
Plafonnier tambour en cristal moderne
Plafonnier tambour en cristal moderne
Plafonnier tambour en cristal moderne
Plafonnier tambour en cristal moderne
Plafonnier tambour en cristal moderne
Charger l'image dans la visionneuse de galerie, Plafonnier tambour en cristal moderne
Charger l'image dans la visionneuse de galerie, Plafonnier tambour en cristal moderne
Charger l'image dans la visionneuse de galerie, Plafonnier tambour en cristal moderne
Charger l'image dans la visionneuse de galerie, Plafonnier tambour en cristal moderne
Charger l'image dans la visionneuse de galerie, Plafonnier tambour en cristal moderne
Charger l'image dans la visionneuse de galerie, Plafonnier tambour en cristal moderne
Charger l'image dans la visionneuse de galerie, Plafonnier tambour en cristal moderne
Charger l'image dans la visionneuse de galerie, Plafonnier tambour en cristal moderne
Charger l'image dans la visionneuse de galerie, Plafonnier tambour en cristal moderne

Plafonnier tambour en cristal moderne

$300.00

12% DE RÉDUCTION

Achetez-en 1

M12

15% DE RÉDUCTION

Achetez-en 2

M15

18% DE RÉDUCTION

Achetez 3 ou plus

M18

$60 DE RÉDUCTION

Commandes de plus de 330 $

M60

$100 DE RÉDUCTION

Commandes de plus de 500 $

M100
Il ne reste que 9998 article(s) en stock
Question

Question

Informations sur l'expédition

Informations sur l'expédition

Politique de retour : Vous disposez de 14 jours après réception de votre commande pour demander un retour.

Disponibilité : Nous livrons aux États-Unis.

Délai de traitement : Le traitement des commandes prend 1 à 2 jours ouvrés (du lundi au vendredi).

Livraison gratuite
Retours sous 14 jours
Paiement sécurisé
Service client

Le design du lustre est simple et luxueux. Les cristaux transparents diffusent une lumière vive et affleurante sous l'éclairage, créant une ambiance chaleureuse et charmante. Non seulement il offre une luminosité suffisante, mais il met également en valeur la décoration intérieure, ajoutant une touche d'espace et une touche de beauté.

Dimensions

  • Dimensions : Diamètre 28 cm x H 28 cm / 11” x 11”

      Détails

      • Matériau : métal, cristal
      • Source lumineuse : E12 (non incluse)
      • Puissance : 40 W
      • Finitions : Noir, Chrome
      • Couleurs : Noir, Chrome
      • Poids : 3 kg / 6,6 lb
      • Méthode de contrôle : Interrupteur à bouton-poussoir (à intensité variable)
      • Longueur du cordon : 150 cm (peut être rallongé sur demande)

      Veuillez noter

      • Veuillez noter que votre paiement n'inclut pas les droits de douane, taxes locales ni autres frais d'importation. La commande ne comprend pas les ampoules.
      • Si vous avez des questions sur nos produits, veuillez nous contacter et nous vous répondrons dans les 24 heures.

      Customer Reviews

      Be the first to write a review
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)

      Monulo · The practical guide

      Lighting that fits.
      A room that feels right.

      Find a starting size, see where to place it, and know what to check before installation.

      Find your starting size
      CLEARANCESIZE↔PROPORTION · PLACEMENT

      01 · Get the scale right

      A useful starting point, in seconds.

      For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

      Starting fixture diameter

      26 in / 66 cm

      With a 9 ft ceiling, a 7 ft clear path leaves about 24 in for the complete drop.

      Complete drop = canopy + suspension + fixture body. This is a planning allowance, not a product specification.

      Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

      02 · Look up

      Work with your ceiling.

      The available drop matters as much as the fixture diameter.

      Around 8 ft / 2.44 m

      Keep it close

      Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

      Around 9–10 ft / 2.74–3.05 m

      Balance the drop

      Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

      Above 10 ft / 3.05 m

      Scale with intention

      Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

      Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

      30–36 inTABLETOP → LOWEST POINT
      30–36 in / 76–91 cm above the tabletop

      Room study 01

      Dining table

      Let the furniture define the focal point.

      Measure
      Measure the tabletop, including its width at the widest point.
      Size & place
      For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
      Check
      Center on the table and check the view across it while seated.
      30–36 inEVEN CENTERS · CLEAR SHADE GAPSCHECK THE FULL ROW BEFORE DRILLING
      30–36 in / 76–91 cm above the counter

      Room study 02

      Kitchen island

      Plan the whole row before choosing the quantity.

      Measure
      Record counter length, width and the working area below.
      Size & place
      Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
      Check
      Mark equal centers; verify the actual gap between shades rather than using center spacing alone.
      ROOM LENGTH12 ft + 14 ft → ABOUT 26 in WIDE
      Start with at least 7 ft / 213 cm walking clearance

      Room study 03

      Room center

      Use the room formula as a visual starting point.

      Measure
      Record length, width and finished ceiling height.
      Size & place
      Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
      Check
      Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.
      LAY OUT EQUAL BAYSEND OFFSET ≈ HALF THE CENTER SPACING
      Keep doors, stairs and walking routes unobstructed

      Room study 04

      Hallway & entry

      A consistent rhythm works better than a crowded ceiling.

      Measure
      Mark the full walking route, doors and changes in ceiling height.
      Size & place
      Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
      Check
      Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.
      MATCH THE USER’S FACE LEVELSCONCE CENTER ≈ 65–70 in ABOVE FLOOR
      Position paired lights symmetrically beside the mirror

      Room study 05

      Bathroom vanity

      Put comfortable facial lighting first.

      Measure
      Record mirror dimensions, side wall space and cabinet swing.
      Size & place
      For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
      Check
      Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.
      TEST FROM A SEATED POSITIONSHADE HIDES THE BULB · SWITCH WITHIN REACH
      Use an adjustable mock-up before fixing wall lights

      Room study 06

      Bedroom & bedside

      Choose the height from where you actually sit.

      Measure
      Measure the mattress, nightstand and your seated position.
      Size & place
      Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
      Check
      Check reach to the switch, head movement, pillows and any adjustable arm.
      LIGHT FROM BESIDE OR BEHINDKEEP THE BULB OUT OF DIRECT VIEW
      A deeper or diffused shade can improve comfort

      Room study 07

      Reading & living

      Light the page without exposing the source.

      Measure
      Sit in your usual chair with a book before locating the lamp.
      Size & place
      Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
      Check
      Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

      03 · Before the tools come out

      One installation checklist.

      Bring the product instructions, room measurements and fixture weight to your installer.

      01 / Fit

      Mock up the final position

      Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

      02 / Support

      Verify the mounting

      Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

      03 / Compatibility

      Match the electrical details

      Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

      Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

      04 · The last few details

      Questions before you choose.

      Which measurement should I use for the drop?

      Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

      Does a larger light always mean a brighter room?

      No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

      How do I choose between two or three island pendants?

      Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

      What if my ceiling is too low for the light I like?

      Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

      Can any fixture go in a bathroom or on a sloped ceiling?

      No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

      What should I send when asking for sizing advice?

      Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.