Vente de luminaires pour la fête du Travail : profitez de 20 % de réduction
Matte black Spanish marble wall sconce
Spanish marble wall sconces in a study setting
Matte black wall sconces around a fireplace
Natural brass Spanish marble wall sconce
Natural brass wall sconces beside framed art
Natural brass wall sconces over a sofa side table
Matte black brass wall plate detail
Natural marble shade detail
Natural brass arm and wall plate detail
Charger l'image dans la visionneuse de galerie, Matte black Spanish marble wall sconce
Charger l'image dans la visionneuse de galerie, Spanish marble wall sconces in a study setting
Charger l'image dans la visionneuse de galerie, Matte black wall sconces around a fireplace
Charger l'image dans la visionneuse de galerie, Natural brass Spanish marble wall sconce
Charger l'image dans la visionneuse de galerie, Natural brass wall sconces beside framed art
Charger l'image dans la visionneuse de galerie, Natural brass wall sconces over a sofa side table
Charger l'image dans la visionneuse de galerie, Matte black brass wall plate detail
Charger l'image dans la visionneuse de galerie, Natural marble shade detail
Charger l'image dans la visionneuse de galerie, Natural brass arm and wall plate detail

Applique murale en marbre naturel et laiton massif

$499.00

12% DE RÉDUCTION

Achetez-en 1

M12

15% DE RÉDUCTION

Achetez-en 2

M15

18% DE RÉDUCTION

Achetez 3 ou plus

M18

$60 DE RÉDUCTION

Commandes de plus de 330 $

M60

$100 DE RÉDUCTION

Commandes de plus de 500 $

M100
Il ne reste que 9999 article(s) en stock
Question

Question

Informations sur l'expédition

Informations sur l'expédition

Politique de retour : Vous disposez de 14 jours après réception de votre commande pour demander un retour.

Disponibilité : Nous livrons aux États-Unis.

Délai de traitement : Le traitement des commandes prend 1 à 2 jours ouvrés (du lundi au vendredi).

Livraison gratuite
Retours sous 14 jours
Paiement sécurisé
Service client

Détails en pierre et laiton

Marbre espagnol, laiton massif et profil mural fin.

Un abat-jour arrondi en marbre naturel s’associe à un corps en laiton épuré, donnant à la pièce un aspect rassemblé pour les espaces de vie calmes, les chambres, les coins lecture et les couloirs.

Détail de l’abat-jour en marbre naturel
Détail de la plaque murale en laiton noir mat
Détail du bras et de la plaque murale en laiton naturel

Artisanat en gros plan

Texture de pierre naturelle avec deux finitions métalliques raffinées.

L’abat-jour montre les veines organiques du marbre, tandis que le corps en laiton massif garde une silhouette fine et architecturale.

  • Abat-jour en marbre avec veines naturelles et forme arrondie en demi-coupe.
  • Finition noir mat pour un accent mural plus discret, façon galerie.
  • Finition laiton naturel pour un intérieur chaleureux et rassemblé.

Histoire de la pièce

Un accent calme à côté d’une œuvre d’art, d’étagères ou d’un mur de chevet.

L’abat-jour en marbre en forme de demi-coupe garde la silhouette sculpturale, tandis que la tige verticale fine ajoute de la hauteur sans encombrer le mur. Utilisez-en une à côté d’un lit, ou installez une paire autour d’une œuvre encadrée pour une symétrie équilibrée.

Appliques murales en marbre espagnol dans un bureau

Détails du produit

Deux finitions avec la même taille compacte.

Couleur Noir mat ; laiton
Finition Noir mat / Laiton naturel
Matériaux Corps en laiton massif ; abat-jour en marbre naturel
Taille Dimensions totales : H 50 cm x P 19 cm / H 19,7" x P 7,5"
Abat-jour : Diam 16 cm / Diam 6,3"
Plaque arrière : L 9 cm x H 18 cm / L 3,5" x H 7,1"
Source lumineuse G9 (Non inclus)
Espaces suggérés Salon, chambre, bureau, couloir
Entretien Essuyez délicatement les surfaces en pierre et en métal avec un chiffon doux et sec.

Options de finition

Deux finitions raffinées pour différents intérieurs.

Finition noir mat
Noir mat Corps en laiton noirci avec abat-jour en marbre naturel
Finition laiton naturel
Laiton naturel Corps en laiton avec abat-jour en marbre naturel

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size
CLEARANCESIZE↔PROPORTION · PLACEMENT

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Starting fixture diameter

26 in / 66 cm

With a 9 ft ceiling, a 7 ft clear path leaves about 24 in for the complete drop.

Complete drop = canopy + suspension + fixture body. This is a planning allowance, not a product specification.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 inTABLETOP → LOWEST POINT
30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure
Measure the tabletop, including its width at the widest point.
Size & place
For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check
Center on the table and check the view across it while seated.
30–36 inEVEN CENTERS · CLEAR SHADE GAPSCHECK THE FULL ROW BEFORE DRILLING
30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure
Record counter length, width and the working area below.
Size & place
Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check
Mark equal centers; verify the actual gap between shades rather than using center spacing alone.
ROOM LENGTH12 ft + 14 ft → ABOUT 26 in WIDE
Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure
Record length, width and finished ceiling height.
Size & place
Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check
Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.
LAY OUT EQUAL BAYSEND OFFSET ≈ HALF THE CENTER SPACING
Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure
Mark the full walking route, doors and changes in ceiling height.
Size & place
Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check
Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.
MATCH THE USER’S FACE LEVELSCONCE CENTER ≈ 65–70 in ABOVE FLOOR
Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure
Record mirror dimensions, side wall space and cabinet swing.
Size & place
For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check
Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.
TEST FROM A SEATED POSITIONSHADE HIDES THE BULB · SWITCH WITHIN REACH
Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure
Measure the mattress, nightstand and your seated position.
Size & place
Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check
Check reach to the switch, head movement, pillows and any adjustable arm.
LIGHT FROM BESIDE OR BEHINDKEEP THE BULB OUT OF DIRECT VIEW
A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure
Sit in your usual chair with a book before locating the lamp.
Size & place
Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check
Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.