Bright brass large A shade pendant light

Solid brass pendant light above a warm dining table

Aged brass pendant light over a dining table with soft daylight

Bright brass small A shade pendant light

Bright brass pendant light above a round table near a window

Bright brass pendant light over a kitchen island

Aged brass pendant light in a green dining room

Close view of the pendant cord and brass canopy connector

Close view of the brushed brass pendant surface

Close view of the brass shade rim and warm inner finish

Charger l'image dans la visionneuse de galerie, Bright brass large A shade pendant light

Charger l'image dans la visionneuse de galerie, Solid brass pendant light above a warm dining table

Charger l'image dans la visionneuse de galerie, Aged brass large A shade pendant light

Charger l'image dans la visionneuse de galerie, Aged brass pendant light over a dining table with soft daylight

Charger l'image dans la visionneuse de galerie, Bright brass small A shade pendant light

Charger l'image dans la visionneuse de galerie, Bright brass pendant light above a round table near a window

Charger l'image dans la visionneuse de galerie, Copper tone B shade pendant light

Charger l'image dans la visionneuse de galerie, Bright brass pendant light over a kitchen island

Charger l'image dans la visionneuse de galerie, Aged brass small A shade pendant light

Charger l'image dans la visionneuse de galerie, Aged brass pendant light in a green dining room

Charger l'image dans la visionneuse de galerie, Close view of the pendant cord and brass canopy connector

Charger l'image dans la visionneuse de galerie, Close view of the brushed brass pendant surface

Charger l'image dans la visionneuse de galerie, Close view of the brass shade rim and warm inner finish

Suspension vintage en laiton massif pour salles à manger et îlots de cuisine

$369.99

Terminer: Laiton brillant

Laiton brillant

Ton Cuivre

Laiton vieilli

Taille de l’abat-jour: Petit A

Petit A

Grand A

Il ne reste que 9999 article(s) en stock

Quantité

Livraison gratuite

Retours sous 14 jours

Paiement sécurisé

Service client

PRÉSENTATION DES DÉTAILS

Surfaces en laiton brossé, profils d’abat-jour sculpturaux et intérieur en métal chaleureux.

Cette suspension est dotée d’un abat-jour en laiton massif à la texture brossée visible, d’un cordon de suspension fin et d’une finition intérieure chaleureuse, pour les salles à manger, cuisines, cafés, bars, coins nuit et petits espaces de détente.

Texture en laiton brosséUn brossage linéaire délicat confère à l’abat-jour une surface métallique artisanale sans ajouter d’ornement imposant.

Connexion par cordon finLa fine ligne de suspension préserve la légèreté de la silhouette, tandis que le connecteur en laiton apporte une finition supérieure épurée.

Bord intérieur chaleureuxLa finition intérieure en laiton réfléchit doucement la lumière tout en conservant un profil d’abat-jour simple et sculptural.

INSPIRATION

La chaleur du laiton vintage pour les tables de salle à manger, les îlots de cuisine et les coins café.

Utilisez une suspension au-dessus d’une petite table de chevet, disposez-en deux ou trois au-dessus d’un îlot de cuisine, ou placez le grand abat-jour au-dessus d’une table de café, où la surface en laiton pourra devenir un point focal discret.

CARACTÉRISTIQUES DU PRODUIT

Cinq options de finition et d’abat-jour en laiton avec détails sur la douille E27.

Consultez les options de finition et de taille d’abat-jour disponibles à gauche, puis vérifiez la tension, la douille, le matériau, la longueur du cordon, l’ampoule et les détails d’utilisation par pièce dans le tableau des spécifications.

Laiton brillant / Petit AD 18 cm / 7,1 po x H 27 cm / 10,6 po

Ton cuivre / BD 20 cm / 7,9 po x H 17 cm / 6,7 po

Laiton vieilli / Petit AD 18 cm / 7,1 po x H 27 cm / 10,6 po

Laiton brillant / Grand AD 26,5 cm / 10,4 po x H 27 cm / 10,6 po

Laiton vieilli / Grand AD 26,5 cm / 10,4 po x H 27 cm / 10,6 po

Faites défiler horizontalement pour voir toutes les options de finition et d’abat-jour disponibles.

Options de finition	Laiton brillant, laiton vieilli, ton cuivre
Options d’abat-jour	Petit A, B, Grand A
Dimensions	Petit A : D 18 cm / 7,1 po x H 27 cm / 10,6 po ; B : D 20 cm / 7,9 po x H 17 cm / 6,7 po ; Grand A : D 26,5 cm / 10,4 po x H 27 cm / 10,6 po
Tension	111 V–240 V
Douille	E27
Ampoule incluse	Non. Ampoule E27 requise, ampoule non incluse.
Longueur du cordon	Cordon de suspension réglable jusqu’à env. 1,5–1,8 m / 59–71 po
Rosace de plafond	Env. D 10 cm / 3,9 po
Matériau	Abat-jour en laiton massif et rosace de plafond en laiton
Risque de fragilité	Moyen. La surface de l’abat-jour en laiton peut se rayer ou se bosseler en cas de manipulation brutale.
Espaces recommandés	Salle à manger, îlot de cuisine, café, comptoir de bar, chevet, salon, restaurant, chambre d’hôtel

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Suspension vintage en laiton massif pour salles à manger et îlots de cuisine

Surfaces en laiton brossé, profils d’abat-jour sculpturaux et intérieur en métal chaleureux.

La chaleur du laiton vintage pour les tables de salle à manger, les îlots de cuisine et les coins café.

Cinq options de finition et d’abat-jour en laiton avec détails sur la douille E27.

Customer Reviews

Lighting that fits.
A room that feels right.

A useful starting point, in seconds.

Work with your ceiling.

Keep it close

Balance the drop

Scale with intention

Dining table

Kitchen island

Room center

Hallway & entry

Bathroom vanity

Bedroom & bedside

Reading & living

One installation checklist.

Mock up the final position

Verify the mounting

Match the electrical details

Questions before you choose.

A little measuring. A better fit.

Vous aimerez peut-être aussi

Informations

Avis de politique

Infolettre

Langue

Se connecter

Réinitialiser votre mot de passe

Suspension vintage en laiton massif pour salles à manger et îlots de cuisine

12% DE RÉDUCTION

15% DE RÉDUCTION

18% DE RÉDUCTION

$60 DE RÉDUCTION

$100 DE RÉDUCTION

Question

Informations sur l'expédition

Surfaces en laiton brossé, profils d’abat-jour sculpturaux et intérieur en métal chaleureux.

La chaleur du laiton vintage pour les tables de salle à manger, les îlots de cuisine et les coins café.

Cinq options de finition et d’abat-jour en laiton avec détails sur la douille E27.

Customer Reviews

Lighting that fits.A room that feels right.

A useful starting point, in seconds.

Work with your ceiling.

Keep it close

Balance the drop

Scale with intention

Dining table

Kitchen island

Room center

Hallway & entry

Bathroom vanity

Bedroom & bedside

Reading & living

One installation checklist.

Mock up the final position

Verify the mounting

Match the electrical details

Questions before you choose.

A little measuring. A better fit.

Vous aimerez peut-être aussi

Lighting that fits.
A room that feels right.