Two-Light Hammered Ceiling Light with a flush mount and a broad glass cover

Two-Light Hammered Ceiling Light with a flush mount and a broad glass cover - New2609-1024581 interior scene

Two-Light Hammered Ceiling Light with a flush mount and a broad glass cover - New2609-1024580 interior scene

Two-Light Hammered Ceiling Light with a flush mount and a broad glass cover - New2609-1024579 interior scene

Two-Light Hammered Ceiling Light with a flush mount and a broad glass cover - New2609-1024577 interior scene

Charger l'image dans la visionneuse de galerie, Two-Light Hammered Ceiling Light with a flush mount and a broad glass cover

Charger l'image dans la visionneuse de galerie, Two-Light Hammered Ceiling Light with a flush mount and a broad glass cover - New2609-1024581 interior scene

Charger l'image dans la visionneuse de galerie, Two-Light Hammered Ceiling Light with a flush mount and a broad glass cover - New2609-1024580 interior scene

Charger l'image dans la visionneuse de galerie, Two-Light Hammered Ceiling Light with a flush mount and a broad glass cover - New2609-1024579 interior scene

Charger l'image dans la visionneuse de galerie, Two-Light Hammered Ceiling Light with a flush mount and a broad glass cover - New2609-1024577 interior scene

Plafonnier martelé à deux lumières avec montage encastré et large diffuseur en verre

$102.00

Nombre de lumières: 2-Lumières

2-Lumières

Finition: Noir

Noir

Chrome

Bronze huilé

Couleur du verre: Verre clair

Verre clair

Verre ambré

Il ne reste que 9999 article(s) en stock

Quantité

Livraison gratuite

Retours sous 14 jours

Paiement sécurisé

Service client

Plafonnier en verre martelé

Une lueur texturée pour les pièces du quotidien.

Deux ampoules E26 diffusent une lumière douce et chaleureuse à travers le verre martelé irrégulier. Son design près du plafond apporte une touche d'élégance sans encombrer la pièce.

Le verre ondulé et martelé adoucit la lumière des ampoules et projette une lueur légèrement texturée sur le plafond.

Forme discrète, idéale pour les entrées, les couloirs, les chambres et les buanderies.

Choisissez votre ambiance. Installez deux ampoules E26 avec un variateur compatible.

Finitions disponibles

Des détails qui permettent de garder le formulaire lisible.

Les finitions noir, chrome, or et bronze huilé conservent la même forme arrondie en verre martelé tout en conférant à la pièce une ambiance visuelle différente.

Verre clair chromé

Verre noir transparent

Verre ambré doré

Bronze huilé Verre clair

Verre doré transparent

1–2 / 5

Détails de construction

Les détails qui assurent la cohérence du design

01 / FINITION DE LA CANOPÉE

Auvent métallique arrondi

La connexion visible permet de conserver la composition du luminaire quel que soit l'angle de vue.

02 / VERRE MARTELÉ

Texture martelée

Les contours irréguliers captent les reflets de la pièce, de sorte que la lumière des deux ampoules apparaît adoucie plutôt que directe et tranchante.

03 / MATÉRIEL INFÉRIEUR

Raccord inférieur

La pièce métallique inférieure apporte la touche finale à l'ensemble, avec un petit détail soigné.

Verre martelé à la main

Surface, cadre et connexion.

De près, le verre martelé révèle des facettes irrégulières et des contours changeants d'une courbe à l'autre. Lorsque les ampoules sont allumées, ces variations diffusent une douce lumière étagée ; éteint, l'abat-jour se révèle être un élément sculptural du plafond à la lumière du jour.

De forme irrégulière par conception, de subtiles différences dans la surface du verre ajoutent de la profondeur selon l'angle de vue dans la pièce.

Éclairage adouci. L'abat-jour texturé interrompt l'éblouissement direct et donne à la lumière une douce impression de mouvement au-dessus de la tête.

Inspiration de scène

Pour les espaces de liaison

Ce luminaire fixé près du plafond ajoute un éclairage d'ambiance sans envahir les pièces qui relient les pièces de la maison.

01 / ENTRÉE

Une entrée accueillante

Les reflets du verre adoucissent l'entrée tandis que le profil affleurant préserve la clarté visuelle du plafond.

02 / COULOIR

Un passage plus lumineux

Dans un couloir, la teinte martelée ajoute de la texture et crée une transition plus chaleureuse entre les pièces adjacentes.

03 / SALON

Détails en plein jour

Même éteintes, la finition en verre martelé et chromée ajoute de la texture à un salon baigné de soleil.

Spécifications du produit

Proportions compactes, détails clairement définis

dimensions du luminaire

9,8 po L × 6,7 po H / 25 × 17 cm

Largeur de la canopée

7,5 po / 19 cm

Matériel

Métal et verre martelé

source lumineuse

2 ampoules moyennes E26

Ampoules

Non inclus

Pouvoir

Câblé, 100–240 V

Puissance

60 W max par ampoule

Emplacement

Sec / humide

Certification

Homologué UL/CE

Options de finition

Chrome, noir, or, bronze huilé

Options de verre

Verre clair / Verre ambré

Notes d'achat

Bon à savoir avant l'installation

Ampoules non incluses.

Choisissez deux ampoules à culot moyen E26 pour régler la luminosité et la température de couleur souhaitées.

Utilisez un variateur compatible.

La variation d'intensité nécessite des ampoules compatibles et un variateur compatible.

Vérifiez les mesures.

De légères différences de mesure et de couleur peuvent survenir entre les écrans, les lots et les environnements.

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Langue

Se connecter

Réinitialiser votre mot de passe