- 22%

Full product view of the vintage lace table lamp with gold curved arm and wood base

Lace shade table lamp on a side table in a soft neutral room

Vintage table lamp styled beside a sofa in a warm living room

Lamp on a round side table with classic room decor

Lamp styled on a dining table with flowers and classic furniture

Close view of the white dotted lace shade and gold shade cap

Close detail of the lace trim, dotted mesh and pom pom edge

Close detail of the round wood base and twisted gold support

Charger l'image dans la visionneuse de galerie, Full product view of the vintage lace table lamp with gold curved arm and wood base

Charger l'image dans la visionneuse de galerie, Lace shade table lamp on a side table in a soft neutral room

Charger l'image dans la visionneuse de galerie, Vintage table lamp styled beside a sofa in a warm living room

Charger l'image dans la visionneuse de galerie, Lamp on a round side table with classic room decor

Charger l'image dans la visionneuse de galerie, Lamp styled on a dining table with flowers and classic furniture

Charger l'image dans la visionneuse de galerie, Close view of the white dotted lace shade and gold shade cap

Charger l'image dans la visionneuse de galerie, Close detail of the lace trim, dotted mesh and pom pom edge

Charger l'image dans la visionneuse de galerie, Close detail of the round wood base and twisted gold support

Lampe de table vintage avec abat-jour en dentelle et bras courbé doré

$284.00 $219.00

Livraison gratuite

Retours sous 14 jours

Paiement sécurisé

Service client

Vue rapprochée de l’abat-jour blanc en dentelle à pois et de son capuchon doré

Gros plan sur la bordure en dentelle, le tulle à pois et le bord à pompons

Vue rapprochée de la base ronde en bois et du pied doré de la lampe

Texture douce de la dentelle et métal vintage chaleureux

Une lampe de table romantique pour les coins de chevet, les espaces de lecture et les intérieurs classiques.

L’abat-jour en tulle à pois, le bord en dentelle volantée, le bras doré torsadé et la base ronde en bois confèrent à la lampe une présence décorative délicate, sans surcharger une petite table.

Le tulle à pois adoucit l’apparence de l’abat-jour.
La dentelle volantée et la bordure à pompons ajoutent une touche vintage artisanale.
Le bras incurvé doré confère à la silhouette une allure légère et décorative.

Échelle de la pièce

Conçue pour les espaces où la lumière douce devient partie intégrante de la décoration.

Placez-la à côté d’un canapé, sur une table de chevet ou comme petite lampe d’appoint dans un coin repas, où la texture du tissu et les détails métalliques chaleureux apportent une ambiance vintage soigneusement composée.

Lampe de table avec abat-jour en dentelle posée sur une table d’appoint dans une pièce aux tons neutres et doux

Options et détails

Un modèle de lampe avec une faible empreinte au sol, idéal pour une table.

Dimensions	∅ 8,3″ x H 17,7″ / Diam. 21 cm x H 45 cm
Matériaux	Métal, tissu, bois
Douille	E27
Source lumineuse	Ampoule LED
Poids brut	3 kg
Connexion	Avec fil

Vue d’ensemble du produit : lampe de table vintage en dentelle avec bras incurvé doré et base en bois

Abat-jour en dentelle blanche / cadre incurvé doré

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo

Lampe de table vintage avec abat-jour en dentelle et bras courbé doré

Une lampe de table romantique pour les coins de chevet, les espaces de lecture et les intérieurs classiques.

Conçue pour les espaces où la lumière douce devient partie intégrante de la décoration.

Un modèle de lampe avec une faible empreinte au sol, idéal pour une table.

Customer Reviews

Lighting that fits.
A room that feels right.

A useful starting point, in seconds.

Work with your ceiling.

Keep it close

Balance the drop

Scale with intention

Dining table

Kitchen island

Room center

Hallway & entry

Bathroom vanity

Bedroom & bedside

Reading & living

One installation checklist.

Mock up the final position

Verify the mounting

Match the electrical details

Questions before you choose.

A little measuring. A better fit.

Vous aimerez peut-être aussi

Informations

Avis de politique

Infolettre

Langue

Se connecter

Réinitialiser votre mot de passe

Lampe de table vintage avec abat-jour en dentelle et bras courbé doré

12% DE RÉDUCTION

15% DE RÉDUCTION

18% DE RÉDUCTION

$60 DE RÉDUCTION

$100 DE RÉDUCTION

Question

Informations sur l'expédition

Une lampe de table romantique pour les coins de chevet, les espaces de lecture et les intérieurs classiques.

Conçue pour les espaces où la lumière douce devient partie intégrante de la décoration.

Un modèle de lampe avec une faible empreinte au sol, idéal pour une table.

Customer Reviews

Lighting that fits.A room that feels right.

A useful starting point, in seconds.

Work with your ceiling.

Keep it close

Balance the drop

Scale with intention

Dining table

Kitchen island

Room center

Hallway & entry

Bathroom vanity

Bedroom & bedside

Reading & living

One installation checklist.

Mock up the final position

Verify the mounting

Match the electrical details

Questions before you choose.

A little measuring. A better fit.

Vous aimerez peut-être aussi

Lighting that fits.
A room that feels right.